Synthesis and characterization of polyimides derived from (3‐amino‐2,4,6‐trimethylphenyl)‐(3′‐aminophenyl)methanone and aromatic dianhydrides

A series of new polyimides were prepared via the polycondensation of (3‐amino‐2,4,6‐trimethylphenyl)‐(3′‐aminophenyl)methanone and aromatic dianhydrides, that is, 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA), 4,4′‐oxydiphthalic anhydride, 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride, and 2,2′‐bis(3,4‐dicarboxyphenyl) hexafluoropropane dianhydride. The structures of the polyimides were characterized by Fourier transform infrared and NMR measurements. The properties were evaluated by solubility tests, ultraviolet–visible analysis, differential scanning calorimetry, and thermogravimetric analysis. The two different meta‐position‐located amino groups with respect to the carbonyl bridge in the diamine monomer provided it with an unsymmetrical structure. This led to a restriction on the close packing of the resulting polymer chains and reduced interchain interactions, which contributed to the solubility increase. All the polyimides except that derived from BPDA had good solubility in strong aprotic solvents, such as N‐methyl‐2‐pyrrolidinone, N,N′‐dimethylacetamide, N,N‐dimethylformamide, and dimethyl sulfone, and in common organic solvents, such as cyclohexanone and chloroform. In addition, these polyimides exhibited high glass‐transition values and excellent thermal properties, with an initial thermal decomposition temperature above 470 °C and glass‐transition temperatures in the range of 280–320 °C. The polyimide films also exhibited good transparency in the visible‐light region, with transmittance higher than 80% at 450 nm and a cutoff wavelength lower than 370 nm. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1291–1298, 2006     

Characterization and electrical properties of polypyrrole/multiwalled carbon nanotube composites synthesized by in situ chemical oxidative polymerization

This study describes the preparation of polypyrrole (PPy)/multiwalled carbon nanotube (MWNT) composites by in situ chemical oxidative polymerization. Various ratios of MWNTs, which served as hard templates, were first dispersed in aqueous solutions with the surfactant cetyltrimethylammonium bromide to form micelle/MWNT templates and overcome the difficulty of MWNTs dispersing into insoluble solutions of pyrrole monomer, and PPy was then synthesized via in situ chemical oxidative polymerization on the surface of the templates. Raman spectroscopy, Fourier transform infrared (FTIR), field‐emission scanning electron microscopy (FESEM), and high‐resolution transmission electron microscopy (HRTEM) were used to characterize the structure and morphology of the fabricated composites. Structural analysis using FESEM and HRTEM showed that the PPy/MWNT composites were core (MWNT)–shell (PPy) tubular structures. Raman and FTIR spectra of the composites were almost identical to those of PPy, supporting the idea that MWNTs served as the core in the formation of a coaxial nanostructure for the composites. The conductivities of these PPy/MWNT composites were about 150% higher than those of PPy without MWNTs. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1413–1418, 2006     

Study of ferromagnetism–superconductivity interactions in Co/Nb multilayers

We investigate Co/Nb multilayers to explore the spontaneous π-phase shift between the superconducting (SC) layers, which is attributed for causing the non-monotonic change of the SC transition temperature (T_c) with the ferromagnetic (FM) layer thickness (t_FM) in several FM/SC multilayered systems. The issue of interfacial roughness is also explored by growing Co/Nb multilayers at various sputtering pressures. Transport measurements show a non-monotonic dependence of T_c on t_FM, and this dependence is insensitive to the structural variation present in the samples, as measured by X-ray scattering.     

Synergistic effect between 4-(2-pyridylazo) resorcin and chloride ion on the corrosion of cold rolled steel in 0.5 M sulfuric acid

The corrosion inhibition of 1-(2-pyridylazo)-2-naphthol (PAR) on the corrosion of cold rolled steel in 0.5 M sulfuric acid (H₂SO₄) was studied using weight loss method and potentiodynamic polarization method. Results obtained revealed that together with chloride ion, PAR is an effective corrosion inhibitor for steel corrosion in sulfuric acid. It was found that for steel corrosion inhibition in the presence of single PAR in sulfuric acid the Temkin adsorption isotherm may be used to explain the adsorption phenomenon. For the mixture of PAR and NaCl used as corrosion inhibitor, however, the Langmuir adsorption isotherm can be used to satisfactorily elucidate the adsorption of mixture of PAR and NaCl. Potentiodynamic polarization studies showed that single PAR mainly acts as a cathodic inhibitor for the corrosion of steel in 0.5 M sulfuric acid. The mixture of PAR and chloride ion, however, acts as a mixed type inhibitor that mainly inhibits cathodic reaction of the steel corrosion in sulfuric acid. By means of electrochemical polarization tests, a desorption potential at ca. −370 mV was observed for the adsorption of mixture of PAR and chloride ion, when potential reaches this value, adsorbed inhibitor molecule heavily departs from the steel surface. For the mixture of PAR and chloride ion, thermodynamic parameters such as adsorption heat, adsorption entropy and adsorption free energy were obtained from experimental data of the temperature studies of the inhibition process at four temperatures ranging from 30 to 45 °C, the kinetic data such as apparent activation energies and pre-exponential factors at different concentrations of the inhibitor were calculated, and the effect of the apparent activation energies and pre-exponential factors on the corrosion rates of cold rolled steel was discussed. The most suitable range of inhibitor concentration was discussed. The inhibitive action was satisfactorily explained by using both thermodynamic and kinetic models. Synergism between chloride ion and PAR was proposed. The results obtained from weight loss and potentiodynamic polarization were in good agreement.     

The energy exchange and the optimum length of the sample tube of opfirl

The energy exchange between the pumping laser and FIR signal in the optically pumped FIR laser (OPFIRL) system was studied. The iteration method has been used to calculate the power density of the pumping and FIR signals at any point along the optical axis of the sample tube. It was found that the power density of the FIR signal did not always increase along the length of the laser tube. There was a maximum FIR power density at the appropriate point in the sample tube. If the distance of maximum power point from the entrance of the OPFIRL tube was taken as the length of sample tube Z_opt, the maximum FIR laser output should be obtained. This was the optimum length of OPFIRL tube. The value of Z_opt was closely related to the parameter of OPFIRL such as the pumping power density, the pumping detuning and the frequency of the FIR laser. The energy-exchange and the maximum output of the fir laser were calculated under the ideal condition.     

葛仙米对丁草胺胁迫的响应

研究了丁草胺对可食用蓝藻葛仙米(Nostoc sphaeroides)生理和代谢活性的影响．用不同浓度的丁草胺处理葛仙米,结果显示低浓度(5 mg·L-1)丁草胺使其光合作用、呼吸作用和光合系统Ⅱ活性增强,高浓度丁草胺(>5 mg·L-1)限制其光合作用、呼吸作用和光合系统Ⅱ活性．同时丁草胺对葛仙米膜结构和功能具有破坏作用,随着丁草胺处理浓度增大,质膜透性不断增大,丙二醛和超氧自由基阴离子含量升高；在低浓度丁草胺处理时,类胡萝卜素含量增加,超氧化物歧化酶(SOD)活性增强,高浓度丁草胺处理时,类胡萝卜素含量降低,SOD活性下降；表明葛仙米对低浓度的丁草胺胁迫具有一定的耐受能力,但高浓度的丁草胺对其生理和代谢构成威胁；针对目前葛仙米野生生境中丁草胺的用量,建议限制丁草胺在葛仙米产地的使用,以保护日益稀缺的葛仙米资源．     

海底掩埋物的目标强度和回声信混比

基于两种流体介质中声散射的修正的Kirchhoff近似,导出计算掩埋物回声的近似公式。应用回声计算的板块元方法和底质的地声模型,能够计算任意形状刚性掩埋物的回声特性。海底沉积层的影响主要反映在声波在底质中传播的衰减。界面的作用主要表现在声波经过两次折射或透射产生的损失。计算结果表明,用常规方式探测掩埋物时回声信混比总是很小, 探测是十分困难的。     

伏安型植物组织生物微电极的研究——茄子组织碳糊微电极的研究

茄子组织生物微电极在儿茶酚测定中表现出了较高的生物催化活性,而对抗坏血酸测定则为稳态响应,这表明该电极能有效地消除抗坏血酸的干扰。该电极的灵敏度高,重现性好,对多巴胺测定的线性范围为5.8×10~(-6)～6.5×10~(-4)mol/L,检出下限为:2.9×10~(-6)mol/L。     

红外光谱法研究含CeSt3的LDPE膜紫外光氧降解

报道了硬脂酸铈（ＣｅＳｔ_３）、及其在各种浓度、或不同温度、或延长贮放时间下含ＣｅＳｔ_３的低密度聚乙烯（ＬＤＰＥ）膜紫外光氧化降解过程的红外光谱。结果表明，只要在ＬＤＰＥ膜中加入０．１ｗｔ＋％～０．３ｗｔ＋％ＣｅＳｔ_３光敏剂，即可控光降解ＬＤＰＥ膜的寿命。     

The Micro-Theory of Ultra-Short Pulse Propagating in Nonlinear Fiber

The modified quantum nonlinear Schrodinger equation of ultra-short pulse propagating in fiber is derived using dispersion relation and the Hamiltonian of the transmission system. The derived equation is solved with linearization approximation, and modulation instability is analyzed. The equation is also solved with Hartree approximation. The results indicate that pulse power, loss and self-steeping effect change the critical frequency, the maximum gain and the gain spectrum range, but the third order dispersion has no effect on modulation instability. The expectation value of optical field is average of a set of modified classical solitons, and higher order terms change the amplitude, pulse position and phase of soliton.