Interactions électriques dans les phases mésomorphes des systèmes amphiphile-eau: Rôle de la teneur en eau,de la longueur de la chaîne paraffinique,de la nature du cation,et de la température

Summary Using X-ray diffraction techniques, we have determined the specific surface of polar groups in the two structures observed for binary soap-water systems in the mesomorphic state: the cylindrical structure and the lamellar one.This parameter depends upon the temperature, the nature of the polar group, the type of structure of the system and the quantity of water present in the mixture. It is, on the contrary, independent of the length of the paraffin chain of the soap. This result suggests that the role of the electrical state of the aqueous regions is by far the most important.

---

Zusammenfassung Mit Hilfe der Röntgenstrahlen-Diffraktion wurde die spezifische Fläche polarer Gruppen der zwei wichtigsten Strukturen der binären Seifen/Wasser-Systeme im mesomorphen Zustand bestimmt: die zylindrische und die lamellare Struktur.Diese Größe ist von der Temperatur, der Natur der polaren Gruppen, der Struktur des Systems und des Wassergehaltes der Mischung abhängig. Die spezifische Fläche ist jedoch von der Länge der Seifen-Paraffin-Kette unabhängig. Der elektrische Zustand des wässerigen Teiles scheint also sehr wichtig zu sein.

     

Countercurrent chromatographic isolation of lolitrem B from endophyte-infected ryegrass (Lolium perenne L.) seed

This paper describes a new method of purification of the Lolitrem B, a tremorgenic mycotoxin produced in planta by the endophytic fungus Neotyphodium lolii. The method is based on the large-scale isolation of the toxin by countercurrent chromatography (CCC). The lolitrem B content in endophyted ryegrass seed, 11 microg/g or 11 ppm, is extracted by stirring finely ground seeds with ethanol for 3 h at room temperature. The concentrated crude extract contains about 0.6 mg/g or 600 ppm of lolitrem B. It is then submitted to CCC purification with a biphasic four-solvent liquid system. A 160-fold enrichment was obtained in one step producing a raffinate containing 10% or 100 mg/g of the toxin. Further purifications were then performed by thin layer and low pressure liquid chromatography. Twenty-eight micrograms of lolitrem B with a 96% purity grade were obtained from 8 kg of seeds (yield 32%).     

A photochemically driven molecular-level abacus

A molecular-level abacus-like system driven by light inputs has been designed in the form of a [2]rotaxane, comprising the pi-electron-donating macrocyclic polyether bis-p-phenylene-34-crown-10 (BPP34C10) and a dumbbell-shaped component that contains 1) a Ru(II) polypyridine complex as one of its stoppers in the form of a photoactive unit, 2) a p-terphenyl-type ring system as a rigid spacer, 3) a 4,4'-bipyridinium unit and a 3,3'-dimethyl-4,4'-bipyridinium unit as pi-electron-accepting stations, and 4) a tetraarylmethane group as the second stopper. The synthesis of the [2]rotaxane was accomplished in four successive stages. First of all, the dumbbell-shaped component of the [2]rotaxane was constructed by using conventional synthetic methodology to make 1) the so-called "west-side" comprised of the Ru(II) polypyridine complex linked by a bismethylene spacer to the p-terphenyl-type ring system terminated by a benzylic bromomethyl function and 2) the so-called "east-side" comprised of the tetraarylmethane group, attached by a polyether linkage to the bipyridinium unit, itself joined in turn by a trismethylene spacer to an incipient 3,3'-dimethyl-4,4'-bipyridinium unit. Next, 3) the "west-side" and "east-side" were fused together by means of an alkylation to give the dumbbell-shaped compound, which was 4) finally subjected to a thermodynamically driven slippage reaction, with BPP34C10 as the ring, to afford the [2]rotaxane. The structure of this interlocked molecular compound was characterized by mass spectrometry and NMR spectroscopy, which also established, along with cyclic voltammetry, the co-conformational behavior of the molecular shuttle. The stable translational isomer is the one in which the BPP34C10 component encircles the 4,4'-bipyridinium unit, in keeping with the fact that this station is a better pi-electron acceptor than the other station. This observation raises the question- can the BPP34C10 macrocycle be made to shuttle between the two stations by a sequence of photoinduced electron transfer processes? In order to find an answer to this question, the electrochemical, photophysical, and photochemical (under continuous and pulsed excitation) properties of the [2]rotaxane, its dumbbell-shaped component, and some model compounds containing electro- and photoactive units have been investigated. In an attempt to obtain the photoinduced abacus-like movement of the BPP34C10 macrocycle between the two stations, two strategies have been employed-one was based fully on processes that involved only the rotaxane components (intramolecular mechanism), while the other one required the help of external reactants (sacrificial mechanism). Both mechanisms imply a sequence of four steps (destabilization of the stable translational isomer, macrocyclic ring displacement, electronic reset, and nuclear reset) that have to compete with energy-wasteful steps. The results have demonstrated that photochemically driven switching can be performed successfully by the sacrificial mechanism, whereas, in the case of the intramolecular mechanism, it would appear that the electronic reset of the system is faster than the ring displacement.     

Studies on the 4-benzoylpyridine-3-carboxamide entity as a fragment model of the Isoniazid-NAD adduct

An ortho-metallation-electrophilic substitution sequence was employed as a key step to build the 4-benzoylpyridine framework. It was found that 4-benzoylpyridine-3-carboxamide and an N-pyridyl alkylated derivative both exist in a unique cyclized hemiamidal structure, not in the usually expected keto-amide open form. These structures represent fragment models of the Isoniazid-NAD adducts involved in the mechanism of action of the antituberculous drug Isoniazid.     

Mechanical and physico-chemical characterization of cyclodextrin finished polyamide fibers

We present the study of the cyclodextrin (CDs) finishing of polyamide fibers (PA) by means of citric acid (CTR) as crosslinking agent. We observed that the mode of grafting happened by the formation of a crosslinked polymer formed between CTR and CDs. This polymer physically adhered to the fibers network and was resistant to hot water washings. Modified fibers were characterized by evaluating the contact angle with a polar liquid and by studying the hysteresis of damping of PA fibers (Cahn balance) with various grafting rates and by studying the absorptivity of grafted fabrics via the technique of the posed drop (Digidrop^® instrument). Then a mechanical characterization of the PA fabrics grafted with various proportions of CDs was accomplished, by traction and tear tests by using a tensile-test bench Lohmergy. Finally a topographic study of PA grafted surfaces was approached by atomic force microscopy (AFM and LFM; contact and non-contact mode) which permitted to evaluate the roughness and the chemical heterogeneity of the grafted surfaces.     

Rhodium(I) catalyst supported on polymer crystal surfaces: Further hydrogenation studies

Catalysts bound to polymers in the form of crosslinked beads have been demonstrated to have a number of advantages over homogeneous catalysts. However, there are several problems that exist due to the polymer support being in the form of a bead. The rate of reaction depends on the presence of solvents that adequately swell the bead in order to allow access to the catalytic sites. Differences in polarity and reactant size can inhibit diffusion into the bead. Recently a new system has been developed whereby tris(triphenyl phosphine) chlororhodium (I) (Wilkinson's catalyst) is bound to the surface of polyethylene single crystals. Polyethylene single crystals have a very high surface to volume ratio allowing for greater ease of reaction compared to a bead system. In a previous paper we showed that there is a dramatic increase in catalytic activity and that the reaction rate increased as the polarity of solvent was increased, even in ethanol where the homogeneous catalyst is not soluble and the polystyrene bead support would not swell. In this letter we are describing the activity of hydrogenation of olefins contained in both large and/or polar molecules. The results demonstrate the advantages of supported catalysts on polyethylene single crystals rather than on polymer beads.     

Palladium-catalyzed synthesis of substituted cyclopentadienes and indenes from allylic esters

Various mono- and di-substituted cyclopentadienes have been prepared by palladium-catalyzed alkylation of allylic esters with cyclopentadienide and t-butyl-cyclopentadienide anions. The same procedure has been applied to the preparation of substituted indenes.     

Die Deprotonierung von Metall-Aquoionen I.: Be · aq2+ Solvatations-Isomerie

The reaction of Be · aq²⁺ with OH^? leeds not only to loss of protons by the metalaquo ion but also to structural changes in the solvation sphere. These can be studied by following the pH variations during the first decisecond after mixing the solutions of metal salt and alkali hydroxide. The equilibrium Be²⁺ ? BeOH⁺ is reached within 5 milliseconds if acid free Beryllium solutions are used. If the metal solution is strongly acidic, however, the establishment of the equilibrium needs more time because of the slowness of the process H⁺ + BeOH⁺ → Be²⁺ (k ～ 10⁵ M^?1, s^?1). The extraction of two protons produces in the first instance an unstable Be(OH) species which transforms into the stable isomer Be(OH)₂ (solvatation isomerism) in a first-order reaction of half-life of 7 ms. This isomerisation causes almost complete disappearance of BeOH⁺ from the equilibrium Be²⁺ ? BeOH⁺ ? Be(OH)₂. (KAKIHANA & SILLEN state that the relaxed solutions contain only Be²⁺, Be(OH)₂, Be₃(OH) and some Be₂OH³⁺.) The formation of the polynuclear species Be₃(OH) needs about 30 seconds to go to completion.     

Capacity and uniform algebras

Let A be a uniform algebra on a compact space X, let M be the maximal ideal space of A, and consider an element ? of A. Choose a component W of $\text{C}$??(X). In 1963 Bishop showed that {$\text{y}\text{in}\text{M ¦ ?(y) ? W}$} can be made into a one-dimensional complex analytic space provided there is a subset G of W having positive area such that for each λ in $\text{G {y}\text{in}\text{M ¦ ?(y) = λ}}$ is finite. We show that the hypothesis of “positive area” may be replaced by “positive exterior capacity” and that no weaker condition will suffice.     

Linear spin-zero quantum fields in external gravitational and scalar fields

We give mathematically rigorous results on the quantization of the covariant Klein Gordon field with an external stationary scalar interaction in a stationary curved space-time. We show how, following Segal, Weinless etc., the problem reduces to finding a “one particle structure” for the corresponding classical system. Our main result is an existence theorem for such a one-particle structure for a precisely specified class of stationary space-times. Byproducts of our approach are:

1. A discussion of when a given “equal-time” surface in a given stationary space-time is Cauchy.
2. A modification and extension of the methods of Chernoff [3] for proving the essential self-adjointness of certain partial differential operators.