空间频率域超声背散射参量用于骨质状况的评价*

在超声背散射骨质评价中,不同测量感兴趣区域(ROI)的超声背散射信号会有波动,致使诊断准确度降低。该文目的是研究超声背散射信号随测量区域的变化规律。采用空间扫描方法离体测量了35块骨样本,将超声背散射参数从空间域变换到空间频率域。结果表明,超声背散射参数的主要空间频率成分集中于低频部分;空间频率域超声背散射参量最大值(MASF)与骨矿密度等参数具有中高度显著相关性(R2=0.45~0.83,p0.001);空间频率域超声背散射参量衰减系数(AC)也与松质骨密度及结构特征有显著相关性(R2=0.41~0.72,p0.001)。研究表明空间频率域变换方法有助于明确超声背散射信号随测量ROI的变化规律,空间频率域的超声背散射相关新参量评价松质骨状况具有可行性。     

二氧化铈纳米球的合成

使用尿素水热法合成了均匀的二氧化铈球型纳米材料.纳米球是由纳米层以及纳米颗粒所构成的核壳结构,其平均粒径为320nm,同时表面主要暴露{111}晶面.尿素水解所产生的氨气分子为纳米球状结构的形成提供了模板,而生成的碳酸根与氢氧根离子作为铈离子的沉淀剂.使用氢气程序升温还原技术表征了氧化铈纳米球材料的氧化还原能力,同时以一氧化碳氧化为探针反应研究了其催化性能.     

《硅光电池特性》实验教学探索和实践

为了更好地培养全校本科生的创新思维和动手实践能力,探索了适合九零后学生的教学方法。针对实验中存在的一些问题,引导学生积极思考,找到一些快速完成实验并且大大降低仪器损耗率的实验技巧,实现学生、教师、学校三方共赢的目标。     

Reflection and transmission characteristics of ultrasonic guided waves in fractured long bone

Assessment of fractured long bone using ultrasonic guided wave（GW） has gained considerable attention.This paper focuses on using the hybrid boundary element method （HBEM） to analyze the propagation characteristics of ultrasonic GW in fractured long bones. The reflection coefficients（RC） and transmission coefficients（TC） for different depth-to-width ratio（d/w） cracks were numerically calculated and analyzed.It has been shown that the primary output modes,which include the transmission and reflection modes,are the same as the incidence modes.For some cracks,different TC curves always got the local maxima in adjacent frequencies.For different d/w cracks,most of the TC curves had local maxima which are not overlapped.These simulation results are helpful to optimize the modes and frequencies of the incidence GWs for quantitatively evaluating the bone quality and providing the numeral results of the cracks in long cortical bones.     

超声轴向传播技术评价长骨的研究

用超声轴向传播技术评价长骨状况已成为近年来的一个研究热点。本文首先介绍了第一到达波(FAS)法、超声Lamb波及柱面导波法在评价长骨皮质骨状况方面的研究进展,最后分析和讨论了当前研究中存在的问题及应该研究的方向。     

邻羟基萘甲醛缩对二甲氨基苯甲酰腙的合成及其对锌离子的识别

设计并合成了用于识别锌离子的荧光传感分子——2-羟基-1-萘甲醛缩-4-二甲氨基苯甲酰腙(1),其结构经1H NMR,IR和MS表征。利用荧光光谱研究了在乙腈中1对过渡金属离子(Zn2+,Cd2+,Cu2+,Hg2+,Pb2+和N i2+)的识别能力。结果表明:1表现出对Zn2+的良好选择性,Zn2+的加入导致1的长波长荧光增强449倍。Job曲线确定1与Zn2+形成1∶1型配合物。     

Joint spectrogram segmentation and ridge-extraction method for separating multimodal guided waves in long bones

Ultrasonic guided waves (GWs) can be used to evaluate long bones effectively because of the ability to provide the information of the whole bone. In this study, a joint spectrogram segmentation and ridge-extraction (JSSRE) method was proposed to separate multiple modes in long bones. First, the Gabor time-frequency transform was applied to obtain the spectrogram of multimodal signals. Then, a multi-class image segmentation algorithm was used to find the corresponding region of each mode in the spectrogram, including an improved watershed transform and a region growing procedure. Finally, the ridges were extracted and the time domain signals representing individual modes were reconstructed from these ridges in each region. The validations of this method were discussed by simulated multimodal signals with different signal-to-noise ratios (SNR). The correlation coefficients between the original signals without noise and the reconstructed signals were calculated to analyze the results quantitatively. The results showed that the extracted ridges were in good agreement with generated theoretical dispersion curves, and the reconstructed signals were highly related to the original signals, even under the SNR=3 dB situation.     

Cyanobiphenyl-based liquid crystal dimers and the twist-bend nematic phase

ABSTRACT

The synthesis and characterisation of several members of the 1,ω-bis(4-cyanobiphenyl-4′-yl) alkane (CBnCB) and the 1-(4-cyanobiphenyl-4′-yloxy)-ω-(4-cyanobiphenyl-4′-yl) alkane (CBnOCB) homologous series are reported. The new odd members described CB5CB, CB13CB, CB4OCB, CB8OCB and CB10OCB all exhibit twist-bend nematic and nematic phases. The members of these series already reported in literature, CB7CB, CB9CB, CB11CB and CB6OCB, were also prepared in order to allow for a direct comparison of their transitional properties. The properties of these dimers are also compared to those of the corresponding members of the 1,ω-bis(4-cyanobiphenyl-4,-yloxy) alkanes (CBOnOCB). For any given total spacer length, for odd members of these series, the nematic–isotropic transition temperatures and associated entropy changes are greatest for the CBOnOCB dimer and lowest for the CBnCB dimer. These trends are understood in terms of molecular shape. For short spacer lengths, the twist-bend nematic–nematic transition temperature (T_NTBN) is higher for the CBnOCB series than for the CBnCB series but this is reversed as the spacer length increases. Of the CBOnOCB dimers, a virtual value of T_NTBN was estimated for CBO3OCB and T_NTBN was measured for CBO5OCB. These values are considerably lower than those observed for the corresponding members of the CBnCB or CBnOCB series. The dependence of T_NTBN on molecular structure is discussed not only in terms of the molecular curvature but also in the ability of the molecules to pack efficiently. As the temperature range of the preceding nematic phase increases, so the twist-bend nematic–nematic transition entropy change decreases and the transition approaches second order for the longer spacers. For comparative purposes, the transitional behaviour of the even-membered dimers CB6CB, CB5OCB and CBO4OCB is reported and differences accounted for in terms of molecular shape.     

Structural characteristics of different types of nanoparticles synthesised in mesomorphic metal alkanoates

The class of thermotropic ionic liquid crystals (LCs) of the metal alkanoates possesses a number of unique properties, such as intrinsic ionic conductivity, high dissolving ability and ability to form time-stable mesomorphic glasses. These ionic LCs can be used as nanoreactors for the synthesis and stabilisation of different types of nanoparticles (NPs). Thus, some semiconductors, metals and core/shell NPs were chemically synthesised in the thermotropic ionic liquid crystalline phase (smectic A) of the cadmium octanoate (CdC₈) and of the cobalt octanoate (CoC₈). By applying the scanning electron microscopy, the cadmium and cobalt octanoate composites containing CdS, Au, Ag and core/shell Au/CdS NPs have been studied. NPs’ sizes and dispersion distribution of the NPs’ size in the nanocomposites have been obtained.     

松质骨超声背散射信号的谱信息熵判断方法

在松质骨超声背散射评价的实际应用中,如何快速准确地判断接收到的信号中是否包含有效背散射信号是一个重要问题。提出一种基于谱信息熵的背散射信号判断方法。对在体采集的984例成人跟骨处临床数据,采用该方法判断背散射信号的有效性,将判断结果与经验判断结果进行对照分析,并分析该方法中的信号区间长度和谱信息熵分段数对判断结果的影响。结果表明,当信号区间长度为13μs,谱信息熵分段数为15~20时,该方法可以获得最佳的判断结果(准确度〉95%,灵敏度〉99%,特异度〉87%),并且计算时间极短(1.5 ms)。因此采用谱信息熵方法判断背散射信号的有效性,可以满足超声骨质评价中对准确性和实时性的要求。