Soluble and Green‐light‐emitting Oligo(9‐fluorenylideneacetic acid): Electrosynthesis and Characterization

A novel semiconducting oligo(9‐fluorenylideneacetic acid) (OFYA) with good redox activity and stability was successfully electrosynthesized by direct anodic oxidation of 9‐fluorenylideneacetic acid (FYA) in CH₂Cl₂ containing boron trifluoride diethyl etherate (BFEE) as the supporting electrolyte. The as‐formed OFYA film was readily soluble in dimethyl sulfoxide and tetrahydrofuran, and partly soluble in water, alcohol, acetonitrile and acetone. FT‐IR and ¹H NMR spectra, together with computational results proved that FYA was probably polymerized through the coupling at C(2) and C(7) positions. Further, OFYA was a typical green light‐emitter with maximal emission at 555 nm and its fluorescence quantum yield was distinctly improved in comparison with that of the monomer. The oligomer was also studied by UV‐vis spectroscopy, MALDL‐TOF mass spectrometry, and thermal analysis, respectively.     

Tunable protic ionic liquids as solvent-catalysts for improved synthesis of multiply substituted 1,2,4-triazoles from oxadiazoles and organoamines

More than green alternatives to traditional volatile molecular organic solvents, protic ionic liquids as dual solvent-catalysts have been successfully used to promote reactions of organoamines with oxadiazoles to afford sterically hindered 1,2,4-triazoles. Among the tested protic ionic liquids, pyridinium trifluoroacetate and acetate showed the highest efficiency for the reactions of arylamines and alkylamines, respectively, indicating that tunable catalysis could be readily effected with protic ionic liquid solvent-catalysts by simply tuning their cation and anion counterparts. A general and efficient approach has been developed for synthesis of multiply substituted 1,2,4-triazoles based on the tunable protic ionic liquid solvent-catalyst systems.     

Preparation of PVDF porous membranes by using PVDF-g-PVP powder as an additive and their antifouling property

The hydrophilic PVDF-g-PVP powder was used as additive to prepare a series of PVDF/PVDF-g-PVP blend porous membranes via an immersion precipitation phase inversion process. FTIR-ATR measurements confirmed that the hydrophilic PVP preferentially segregated to the interface between membrane and coagulant. SEM images showed that there was no big change in the membrane cross-section with the amount of PVDF-g-PVP increased. However, the membrane surface roughness increased with the amount of PVDF-g-PVP increased according to AFM data. The mean pore size of membranes reached max when the amount of PVDF-g-PVP was 10 wt%. The water contact angle and filtration experiments revealed that the surface enrichment of PVP endowed the membranes with significantly enhanced surface hydrophilicity and protein-adsorption resistance. The flux recovery of the porous membranes was increased from 37.50% to 77.23% with the amount of PVDF-g-PVP increased from 0 to 50 wt%, also indicating that the antifouling property of the porous membranes was improved.     

A versatile method for the synthesis of 3-alkoxycarbonyl beta-lactam derivatives

[reaction: see text] Ketene-imine cycloaddition reactions (the Staudinger reaction) of ethoxycarbonyl(phenylthio)ketene with various imines and subsequent desulfurization reactions were employed to synthesize 3-ethoxycarbonyl beta-lactam derivatives. The results indicate that the current approach provides a convenient, mild, and versatile method for synthesizing a variety of 3-alkoxycarbonyl trans-beta-lactam derivatives with good to excellent yields and diastereoselectivities.     

Electrowetting of aligned carbon nanotube films

Electrowetting is one approach to reducing the interfacial tension between a solid and a liquid. In this method, an electrical potential is applied across the solid/liquid interface which modifies the wetting properties of the liquid on the solid without changing the composition of the solid and liquid phases. Electrowetting of aligned carbon nanotube (CNT) films is investigated by the sessile drop method by dispensing deionized (DI) water or 0.03 M NaCl droplets (contacted by Au wire) onto aligned CNT films assembled on a copper substrate. The results demonstrate that electrowetting can greatly reduce the hydrophobicity of the aligned CNTs; the contact angle saturation for DI water and 0.03 M NaCl droplets occurs at 98 and 50 degrees , respectively. The combined effects of the geometrical roughness and the electrical potential on the contact angle are briefly discussed and modeled. Such a strategy may be invoked to controllably reduce the interfacial tension between carbon nanotubes (CNTs) and polymer precursors when infiltrating the monomers into the prealigned nanotube films.     

Effects of hydroxyethyl methyl cellulose ether on the hydration and compressive strength of calcium aluminate cement

Journal of Thermal Analysis and Calorimetry - Aluminate containing phases such as tricalcium aluminate (C3A) and dodecacalcium heptaaluminate (C12A7) play a key role in the reaction between...     

Building Polyoxometalate “Nano-Walls” on 3D Porous Carbon Paper: A Solar Steam Generation System for Water Purification

As promising fresh-water purification devices, solar steam generation systems have attracted significant attention recently. However, in practice, the approach often suffers from a poor solar energy conversion efficiency and a low water production rate due to poor material selection and inefficient microscopic structure design. Here, we fabricate an efficient solar steam generation system by “building” polyoxometalate “nano-walls” on rice paper-derived three-dimensional porous carbon paper. In this solar steam generation system, the height of the vertically aligned CoP₄Mo₆ “nano-walls” range from 100 to 150 nm with thicknesses about 15 to 25 nm. Under 1 sun irradiation (1 sun = 1 kW m⁻²), the surface temperature increases from 29 to 50 °C in a short time with a solar thermal conversion efficiency achieving 92.8 %. The stability and durability of this solar steam generation system, which withstands fifteen cycle continuous tests, also offer good prospects. Its attractive solar energy conversion performance originates from the intense sunlight absorption and high conversion ability of the CoP₄Mo₆ “nano-walls”, as well as extremely promising heat localization and water transportation properties of the three-dimensional porous carbon paper. This solar steam generation system, which has produced some inspiring results, is employed for seawater desalination and for purification of water polluted with organic dyes.     

Modulation of the lifespan of C. elegans by the controlled release of nitric oxide

The frontier of nitric oxide biology has gradually shifted from mechanism elucidation to biomanipulation, e.g. cell-proliferation promotion, cell-apoptosis induction, and lifespan modulation. This warrants biocompatible nitric oxide (NO) donating materials, whose NO release is not only controlled by a bioorthogonal trigger, but also self-calibrated allowing real-time monitoring and hence an onset/offset of the NO release. Additionally, the dose of NO release should be facilely adjusted in a large dynamic range; flux and the dose are critical to the biological outcome of NO treatment. Via self-assembly of a PEGylated small-molecule NO donor, we developed novel NO-donating nanoparticles (PEG-NORM), which meet all the aforementioned criteria. We showcased that a low flux of NO induced cell proliferation, while a high flux induced cell oxidative stress and, ultimately, death. Notably, PEG-NORM was capable of efficiently modulating the lifespan of C. elegans. The average lifespan of C. elegans could be fine-tuned to be as short as 15.87 ± 0.29 days with a high dose of NO, or as long as 21.13 ± 0.41 days with a low dose of NO, compared to an average life-span of 18.87 ± 0.46 days. Thus, PEG-NORM has broad potential in cell manipulation and life-span modulation and could drive the advancement of NO biology and medicine.

Schematic illustration of modulating the longevity of the C. elegans by PEG-NORM nanoparticles.     

A novel off-on fluorescent probe for specific detection and imaging of cysteine in live cells and in vivo

Cysteine(Cys) plays a pivotal role in many physiological and pathological processes,including detoxification and protein synthesis.The abnormal levels of Cys are linked to many diseases.In this study,a novel red-emitting off-on fluorescent probe Cys-TCF was masterly constructed for discriminative detection of Cys.After a series of experimental assessment,Cys-TCF displayed higher selectivity and sensitivity for Cys over other biothilols with a low detection limit(0.04 μmol/L).More notably,the pro...     

由气相色谱程序升温数据计算恒温保留指数

提出了一种由程序升温数据推算恒温保留指数的计算方法,采用实验数据关联死时间和温度的关系,引入等效温度作为间接变量进行最优化。应用于Ｃ＿５～Ｃ＿９正构烷烃和Ｃ＿６烯烃的数据表明该法适应性强、精确度高,推算的恒温保留指数可作为定性依据。