采用衍射掩模产生白光横向平顶光束

白光横向平顶光束在定向背光式自由立体显示器中有重要应用.本文提出一种采用带蝶形小孔阵列的衍射掩模片获得白光横向平顶光束的方法.根据广义惠更斯-菲涅耳衍射积分和多波长叠加原理,推导出光强分布计算式.设计一套实验装置,数值模拟并实验验证出射光束在不同距离的横向光强分布以及小孔蝶形凹度(蝶形中心高度与边长的比值)对横向光强分布的影响.结果表明:当选择小孔蝶形凹度为0.50—0.66时,可以得到平顶因子F 0.89的白光横向平顶光束,横向平顶光束的宽度随着传输距离的增大而增大,而平顶因子基本不变.实验还发现柱面透镜的折射色散和衍射色散可以互相抵消,使白光横向平顶光束基本无色散.     

Fe掺杂ZnSe团簇结构和磁性质

采用密度泛函理论研究了Fe原子单掺杂和双掺杂(ZnSe)12团簇的结构、电子性质和磁性质.我们考虑了三种掺杂方式:替代掺杂,外掺杂和内掺杂.单掺杂时,外掺杂团簇是最稳定结构;而双掺杂时,内掺杂团簇是最稳定结构.团簇磁矩主要来自Fe-3d态的贡献,4s和4p态也贡献了一小部分磁矩.由于轨道杂化,相邻的Zn和Se原子上也产生少量自旋.不同掺杂团簇的总磁矩不同,在可调磁矩的磁性材料领域有潜在应用价值.     

掺钕微球的受激辐射激光和自受激拉曼散射

采用溶胶-凝胶法在SiO_2微球表面覆盖上一薄层Nd~(3+)掺杂SiO_2,并经电极放电熔融后形成表面光滑的高Q值微球.采用锥光纤将808 nm的抽运激光耦合入钕离子掺杂的高Q值微球形成回廊模,激发产生了1080—1097 nm波段受激辐射激光.由于所产生的激光有足够高的功率密度,在高Q SiO_2微球中激发产生了波长为1120—1143 nm一级自受激拉曼散射激光.推导了锥光纤掺钕微球组合的自受激拉曼散射的输出功率和阈值公式.描述了输出激光的特性:阈值、输出功率、线宽、边模抑制比.     

A high-throughput search for direct methanol fuel cell anode electrocatalysts of type PtxBiyPbz

We used a high-throughput method to screen for direct methanol fuel cell anode electrocatalysts in the Pt-Bi-Pb system. Previous studies showed that PtBi and PtPb (both NiAs structure type) were active electrocatalysts for the oxidation of formic acid, but only PtPb was active in oxidizing methanol. We synthesized thin films with continuous composition spreads of the three elements by magnetron sputtering at deposition temperatures from ambient to 510 °C. A fluorescence method was then used to identify compositions that were active toward methanol oxidation. Only films deposited between temperatures of 160 and 400 °C showed electrocatalytic activity. The areas that were active for methanol oxidation showed predominantly the NiAs structure type according to XRD, with optimal activity for compositions near PtBi_0.01Pb_0.53.     

电控聚合物分散液晶变焦全息透镜制作

介绍了相位型全息聚合物分散液晶(PDLC)材料全息透镜,在电场作用下液晶微滴折射率逐渐与聚合物折射率匹配,实现透镜电控变焦。研究了微米尺寸和纳米尺寸液晶微滴聚合物分散液晶材料配方特性和微观结构。采用优化纳米尺寸材料配方制作5~6μm聚合物分散液晶盒,采用离轴式平面波和球面波干涉全息写入光路,成功制作电控变焦聚合物分散液晶全息透镜样品。该透镜样品焦距为20 mm,能够正一级衍射放大成像。实现“0”,“1”变焦的驱动电压阈值为60 V。并进一步提出了基于聚合物分散液晶电控变焦元件集成叠加技术实现电控变焦光学成像系统的技术思路。     

White up-conversion emission in Ho/Tm/Yb tri-doped glass ceramics embedding BaF2 nanocrystals

Ho³⁺/Tm³⁺/Yb³⁺ tri-doped glass ceramics with white light emitting have been developed and demonstrated. Pumped by 980 nm laser diode (LD), intensive red, green and blue up-conversions (UC) were obtained. The green emission is assigned to Ho³⁺ ion and the blue emission is assigned to Tm³⁺ ion, whereas the red emission is the combination contribution of the Ho³⁺ and Tm³⁺ ions. The RGB intensities could be adjusted by tuning the rare-earth ion concentration and pump power intensity. Thus, multicolor of the luminescence, including perfect white light with CIE-X=0.329 and CIE-Y=0.342 in the 1931 CIE chromaticity diagram can be obtained in 0.15 Ho³⁺/0.2Tm³⁺/3Yb³⁺ tri-doped glass ceramics embedding BaF₂ nanocrystals pumped by a single infrared laser diode source of 980 nm at 500 mW. The up-conversion luminescence mechanism of Yb³⁺ sensitize Ho³⁺ and Tm³⁺ ions and the energy transfer from Ho³⁺ to Tm³⁺ in oxy-fluoride silicate glass ceramics were analyzed.     

Characterization and activity of visible-light-driven TiO2 photocatalyst codoped with lanthanum and iodine

The novel visible-light-activated La/I/TiO₂ nanocomposition photocatalyst was successfully synthesized using precipitation-dipping method, and characterized by X-ray powder diffraction (XRD), the Brunauer-Emmett-Teller (BET) method, transmission electron microscopy (TEM), thermogravimetry-differential scanning calorimetry (TG-DSC) and UV-vis diffuse reflectance spectroscopy (UV-vis DRS). The photocatalytic activity of La/I/TiO₂ was evaluated by studying photodegradation of reactive blue 19 as a probe reaction under simulated sunlight irradiation. Photocatalytic experiment results showed that the maximum specific photocatalytic activity of the La/I/TiO₂ photocatalyst appeared when the molar ratio of La/Ti was 2.0 at%, calcined at 350 °C for 2 h, due to the sample with good crystallization, high BET surface area and small crystal size. Under simulated sunlight irradiation, the degradation of reactive blue 19 aqueous solution reached 98.6% in 80 min, which showed La/I/TiO₂ photocatalyst to be much higher photocatalytic activity compared to standard Degussa P25 photocatalyst. The higher visible light activity is due to the codoping of lanthanum and iodine.     

Subpicosecond pulse generation from a 1.56 μm mode-locked VECSEL

Near-transform-limited subpicosecond pulses at 1.56 μm were generated from an optically pumped InP-based vertical-external-cavity surface-emitting laser (VECSEL) passively mode-locked at 2 GHz repetition rate with a fast InGaAsNSb/GaAs semiconductor saturable absorber mirror (SESAM). The SESAM microcavity resonance was adjusted via a selective etching of phase layers specifically designed to control the magnitude of both the modulation depth and the intracavity group delay dispersion of the SESAM. Using the same VECSEL chip, we observed that the mode-locked pulse duration could be reduced from several picoseconds to less than 1 ps with a detuned resonant SESAM.     

液体火箭发动机中声腔抑制不稳定燃烧的声学分析

发展了声腔的分析和数值模型,对液体火箭发动机不稳定燃烧的抑制作用进行了评定,通过迭代计算研究了二维流动和温度分布变化对声腔调 谐和稳定性能的影响,对不同的声腔几何尺寸和温度梯度的稳定性计算结果表明,燃烧带有较大开口面积的声腔会更大程度地改变振荡的空间分布,这种改变而且影响了驱动和抑制燃烧的机理,讨论了在声腔设计安排中正确选择声腔的几何尺寸,且比较了不同长度和不同直径声腔的阻尼特性,通过考察声吸收系统的方法来最优化系统的阻尼,得到了可供设计参考的结论。     

提高单层GeSe对H2O气体传感性能的第一性原理研究

采用第一性原理计算方法,通过在单层GeSe上施加双轴向应变、外加电场、掺Ag等途径来探索提高单层GeSe对H₂O分子传感性能的有效方法,并从微观角度阐明内在机理.计算结果表明,-1.0 V/?的外加电场能有效降低H₂O分子在单层GeSe的吸附能并使二者之间的电荷转移量增加11倍,显著提高了单层GeSe对H₂O分子的响应速度和敏感性.研究结果为进一步设计并制成二维GeSe基湿度传感器提供了理论依据.