High quality sub-monolayer,monolayer, and bilayer graphene on Ru（0001）

High quality sub-monolayer, monolayer, and bilayer graphene were grown on Ru(0001). For the sub-monolayer graphene, the size of graphene islands with zigzag edges can be controlled by the dose of ethylene exposure. By increasing the dose of ethylene to 100 Langmuir at a high substrate temperature(800℃), high quality single-crystalline monolayer graphene was synthesized on Ru(0001). High quality bilayer graphene was formed by further increasing the dose of ethylene while reducing the cooling rate to 5℃/min. Raman spectroscopy revealed the vibrational states of graphene, G and 2D peaks appeared only in the bilayer graphene, which demonstrates that it behaves as the intrinsic graphene. Our present work affords methods to produce high quality sub-monolayer, monolayer, and bilayer graphene, both for basic research and applications.     

Preparation and Characterization of GCE Coatings Combining DDDMAB and PDADMAC with FAD and HCM for Electrocatalytic Detection of Oxygen and Sulfur Oxoanions

Electrochemically active hybrid coatings based on cationic films, didodecyldimethylammonium bromide (DDDMAB), and poly(diallyldimethylammonium chloride) (PDADMAC) are prepared on glassy carbon electrode surface by cycling the film‐covered electrode repetitively in a pH 7 solution containing flavin adenine dinucleotide (FAD), and anionic hexacyanometalate (HCM) complexes, Fe(CN)₆^3? and Ru(CN)₆^4?. Cyclic voltammetric features of hybrid coatings resemble that of electron transfer process of surface‐confined redox species. Electrochemical quartz crystal microbalance (EQCM) was used to monitor the deposition of FAD on DDDMAB film. Cyclic voltammetric peak potentials of modified electrode were found to be shifted to more negative region with increasing pH of contacting solution with a slope value of 63.3mV per pH unit. The electrocatalytic behavior of FAD‐modified DDDMAB‐coated GCE and hybrid film electrodes was tested towards reduction of oxygen, S₂O₈^2?, SO₅^2? and oxidation of SO₃^2?. The application of FAD‐modified DDDMAB‐coated GCE for S₂O₈^2? estimation was demonstrated in amperometric mode. The sensitivity and detection limit (S/N=3) were 267.6 μA mM^?1 and 2×10^?6 M, respectively.     

Properties study of LiNbO3 lateral field excited device working on thickness extension mode

This paper investigates the properties of thickness extension mode excited by lateral electric field on LiNbO3 by using the extended Christoffel-Bechmann method. It finds that the lateral field excitation coupling factor for amode (quasi-extensional mode) reaches its maximum value of 28% on X-cut LiNbO3. The characteristics of a lateral field excitation device made of X-cut LiNbO3 have been investigated and the lateral field excitation device is used for the design of a high frequency ultrasonic transducer. The time and frequency domain pulse/echo response of the LiNbO3 lateral field excitation ultrasonic transducer is analysed with the modified Krimholtz-Leedom-Matthae model and tested using traditional pulse/echo method. A LiNbO3 lateral field excitation ultrasonic transducer with the centre frequency of 33.44 MHz and the -6 dB bandwidth of 33.8% is acquired, which is in good agreement with the results of the Krimholtz-Leedom-Matthae model. Further analysis suggests that the LiNbO3 lateral field excitation device has great potential in the design of broadband high frequency ultrasonic transducers.     

Study of the characteristics of a scintillation array and single pixels for nuclear medicine imaging applications

By using a pixelized Nal（T1） crystal array coupled to a R2486 PSPMT, the characteristics of the array and of a single pixel, such as the light output, energy resolution, peak-to-valley ratio （P/V） and imaging performance of the detector were studied. The pixel size of the NaI（TI） scintillation pixel array is 2 mm×2 mm×5 mm. There are in total 484 pixels in a 22×22 matrix. In the pixel spectrum an average peak-to-valley ratio （P/V） of 16 was obtained. In the image of all the pixels, good values for the Peak-to- Valley ratios could be achieved, namely a mean of 17, a maximum of 45 and the average peak FWHM （the average value of intrinsic spatial resolution） of 2.3 mm. However, the PSPMT non-uniform response and the scintillation pixels array inhomogeneities degrade the imaging performance of the detector.     

Chemical constituents and biological activities of Viburnum macrocephalum f. keteleeri

Three new compounds (1–3) and seven known compounds (4–10) have been isolated from the ethanolic extract of Viburnum macrocephalum f. keteleeri using bioactivity-guided fractionation and identified as methyl (2-α-L-rhamnopyranosyloxy)acetate (1), methyl (2R-3-α-L-rhamnopyranosyloxy)glycerate (2), methyl (3R-4-α-L-rhamnopyranosyloxy-3-hydroxy)butanoate (3), bridelionoside B (4), (6S,7E,9R)-roseoside (5), linarionoside A (6), 3,7,11-trimethyl-1,6-dodecadien-3,10,11-triol (7), (+)-8-hydroxylinalool (8), β-sitosterol (9) and daucosterol (10). The structures of 1–3, including absolute configurations, were determined by spectroscopic data (¹H and ¹³C NMR, HSQC, HMBC and ORD) and chemical methods. In addition, compounds 1–8 were assayed for their insecticidal and antimicrobial activities. Compounds 7 and 8 exhibited moderately insecticidal effects against Mythimna separata with LD₅₀ values of 180 and 230 μg g^?1, respectively. Compounds 2, 3, 7 and 8 showed varying antimicrobial activities with IC₅₀ values ranging from 125 to 529 μM.     

（E）-α-Bromovinylselenides as Convenient Precursors for Stereose-lective Synthesis of Trisubstituted Alkenes

Based on the different reactivity of selanyl and bromo groups,(E)-α-bromovinylselenides can undergo sequential cross coupling reactions with nucleophiles in the presence of transition metal complexes to form two carbon-carbon bonds in the same olefinic carbon leading to trisubstituted alkenes stereoselectively in good yields.     

红细胞标记抗体的化学发光免疫分析

用红细胞代替辣根过氧化物酶作为双抗体夹心免疫分析中第二抗体的标记物, 建立了一种红细胞标记抗体的免疫化学发光测定乙型肝炎病毒表面抗原的新方法. 在免疫反应完成后, 结合了抗原-抗体免疫复合物的致敏红细胞在低渗溶液中溶血, 释放出血红蛋白. 基于血红蛋白对鲁米诺-H2O2体系化学发光具有催化作用的原理, 采用化学发光法测定血红蛋白含量. 测得的血红蛋白发光强度与待测抗原浓度呈线性关系. 采用这种方法可检测出0.5 ng/mL的乙型肝炎病毒表面抗原. 将该方法与酶联免疫吸附分析(ELISA)结合起来对乙型肝炎患者血清乙肝病毒表面抗原(HBsAg)进行检测, 两者符合率均为97%, 表明本法具有良好的灵敏度和特异性, 可用于临床标本测试.     

水溶性聚合物与方解石晶体相互作用的MD模拟

用分子动力学(MD)方法, 模拟计算了三种水溶性聚合物阻垢剂[聚丙烯酸(PAA)、聚甲基丙烯酸(PMAA)、丙烯酸-丙烯酸甲酯共聚物(AA-MA)]与方解石晶体的作用. 结果表明, 聚合物与方解石两晶面结合能的大小均为PAA ＞ AA-MA ＞ PMAA, 聚合物与(1 0)面的相互作用远比与(104)面的作用强. 对体系各种相互作用以及对关联函数g(r)的分析表明, 结合能主要由库仑作用决定. 与方解石晶面结合的聚合物发生扭曲变形, (1 0)面上的形变能约为(104)面上的2倍, 但均远小于相应的非键作用能. 聚合物中不同位置羧基的动力学行为差别很大, 链端羧基的运动翻转比链中部羧基剧烈得多, 后者与方解石晶体的结合比前者牢固而能更有效地抑制垢晶体生长.     

羧酸共聚物与方解石晶体相互作用的MD模拟

用分子动力学方法, 模拟计算了丙烯酸-丙烯酸甲酯共聚物(AA-MAE)、丙烯酸-丙烯酸羟丙酯共聚物(AA-HPA)、丙烯酸-马来酸共聚物(AA-MA)及水解马来酸酐(HPMA)四种聚羧酸类阻垢剂与方解石晶体(110)晶面的相互作用. 结果表明, 聚羧酸与(110)晶面结合能的大小排序为AA-MA＞HPMA＞AA-HPA＞AA-MAE; 对体系各种相互作用以及径向分布函数的分析表明, 结合能主要由库仑作用(包括离子键)提供, 并含少量氢键成分. 与方解石晶面结合的聚合物发生扭曲变形, 但形变能远小于相应的非键作用能. 聚合物中不同位置羧基的动力学行为差别很大, 链端羧基的运动翻转比链中部羧基剧烈得多, 故后者与晶面的结合比前者更牢固而具有更强的阻垢能力.     

Insecticidal and α-glucosidase inhibitory activities of chemical constituents from Viburnum fordiae Hance

The ethanolic extract of the stems of Viburnum fordiae Hance showed insecticidal and α-glucosidase inhibitory activities and then was fractionated by bioactivity-guided fractionation to obtain a rare C₁₃-norisoprenoid (1), together with a new phenolic glycoside (2), and seven known compounds, alangionoside C (3), pisumionoside (4), koaburaside (5), 3,5-dimethoxy-benzyl alcohol 4-O-β-d-glucopyranoside (6), 3,4,5-trimethoxybenzyl-β-d-glucopyranoside (7), arbutin (8), and salidroside (9). The previously undescribed compounds were elucidated as (3R,9R)-3-hydroxy-7,8-didehydro-β-ionyl 9-O-α-d-arabinopyranosyl-(1→6)-β-d-glucopyranoside (1) and 2-(4-O-β-d-glucopyranosyl)syringylpropane-1,3-diol (2) by spectroscopic data (¹H and ¹³C NMR, HSQC, HMBC, ¹H-¹H COSY, HSQC-TOCSY, HRESIMS, IR and ORD) and chemical methods. Compound 1 showed potent insecticidal effect against Mythimna separata with LD₅₀ value of 140 μg g^?1. Compounds 2, 5, 6, 8 and 9 showed varying α-glucosidase inhibitory activity with IC₅₀ values ranging from 148.2 to 230.9 μM.