掺杂AS2S8非晶态薄膜波导的光阻断效应

实验研究了未掺杂和低浓度掺锡和掺磷的As2S8薄膜波导的光阻断效应,提供了三种样品的光阻断响应曲线、室温退激实验数据和光谱测试数据.结果表明,掺锡样品可以明显提升毫秒级响应的快过程恢复作用,同时还具有减少残留传输损耗的效果,掺磷的效果则相反.结合实验结果给出了分析讨论.     

Improvement on peak-to-trough ratio of sampled fiber Bragg gratings with multiple phase shifts

Via a cascaded structure, the peak-to-trough ratio is considerably improved for sampled fiber Bragg gratings （SFBGs） based on multiple-phase-shift （MPS） technique. This cascaded filter is composed of two identical SFBGs which are inserted with the increasing or decreasing arrangement of phase shifts. With this inverse arrangement of MPS in grating design, the phase fluctuation of individual SFBG can be compensated, and as a result an excellent phase matching condition is realized. In this way, the peak-to- trough ratio in reflection spectra is improved from 6 to 12 dB when multiplication factor m = 4, and from 5dBto 10dBwhenm=8.     

超导电缆的性能检测方法研究

超导电缆与常规电缆在电磁特性上有很大差异。因此,有必要对其试验内容、性能检测方法和试验设备进行研究和规范。文中从超导电缆的电磁特性出发,探讨了超导电缆的试验内容及性能检测方法,并重点介绍了超导电缆交流损耗的测量方法。     

两纠缠原子与光场相互作用系统原子的纠缠特性

研究了两纠缠原子与单模相干态光场相互作用系统中原子纠缠度的时间演化特性,运用全量子理论和数值计算的方法,应用Concurrence纠缠度量标准,讨论了原子初始时刻的纠缠状态和光场强度对两原子纠缠度的影响.结果表明：双原子系统初始纠缠度越大,两原子间的纠缠在演化过程中的峰值也越大;随着光场强度的增加,两原子纠缠度的振荡曲线逐渐表现出崩塌-回复现象,周期性也越来越明显.     

Gd2O3:Eu3+纳米晶的燃烧合成及光致发光性质

采用柠檬酸作燃烧剂用燃烧合成法制备了Gd2O3:Eu3+纳米晶.用X射线衍射仪(XRD)、高分辨透射电子显微镜(HRTEM)和荧光分光光度计等对Gd2O3:Eu3+纳米晶的结构、形貌和发光性能进行了分析.结果表明:不同柠檬酸与稀土离子配比(C/M)制备的样品经800℃退火1 h后,均得到了纯立方相的Gd2O3:Eu3+纳米晶,晶粒尺寸约为30 nm,尺寸分布较窄,其中以C/M=1.0时制备的纳米晶结晶性最好,发光强度最大.Gd2O3:Eu3+纳米晶主发射峰位置均在612 nm处(5D0→7F2跃迁),激发光谱中电荷迁移态发生红移,观察到Gd3+向Eu3+的有效能量传递.对柠檬酸与稀土离子配比(C/M)对结晶度、发光性质等的影响也进行了分析和讨论.     

Incompatibility networks as models of scale-free small-world graphs

We make a mapping from Sierpinski fractals to a new class of networks, the incompatibility networks, which are scale-free, small-world, disassortative, and maximal planar graphs. Some relevant characteristics of the networks such as degree distribution, clustering coefficient, average path length, and degree correlations are computed analytically and found to be peculiarly rich. The method of network representation can be applied to some real-life systems making it possible to study the complexity of real networked systems within the framework of complex network theory.     

Fabrication of durable hydrophobic surfaces through surface texturing

Low surface energy polymer thin-films can be applied to surfaces to increase hydrophobicity and reduce friction for a variety of applications. However, wear of these thin films, resulting from repetitive rubbing against another surface, is of great concern. In this study, we show that highly hydrophobic surfaces with persistent abrasion resistance can be fabricated by depositing fluorinated carbon thin films on sandblasted glass surfaces. In our study, fluorinated carbon thin films were deposited on sandblasted and as-received smooth glass using deep reactive ion etching equipment by only activating the passivation step. The surfaces of the samples were then rubbed with FibrMet abrasive papers in a reciprocating motion using an automatic friction abrasion analyzer. During the rubbing, the static and kinetic friction forces were also measured. The surface wetting properties were then characterized using a video-based contact angle measuring system to determine the changes in water contact angle as a result of rubbing. Assessment of the wear properties of the thin films was based on the changes in the water contact angles of the coated surfaces after repetitive rubbing. It was found that, for sandblasted glass coated with fluorinated carbon film, the water contact angle remained constant throughout the entire rubbing process, contrary to the smooth glass coated with fluorinated carbon film which showed a drastic decrease in water contact angle with the increasing number of rubbing cycles. In addition, the static and kinetic friction coefficients of the sandblasted glass were also much lower than those of the smooth glass.     

基于发射光谱的DF激光器光腔温度与粒子数分布

 建立了谱线增益系数与温度、粒子数分布之间及谱线增益系数与谱线强度之间的关系式,对一台燃烧驱动DF激光器的发射光谱进行了测量,利用发射光谱数据计算得到光腔温度为381.4 K,分布在振动态能级1与0,振动能级2与1,振动能级3与2的粒子数之比分别为0.60～0.62, 0.676 4, 0.71～0.74。     

紧凑型X-pinch装置探头标定

 介绍了紧凑型X-pinch脉冲功率装置的电流电压测量设计方法。根据该装置的同轴传输线结构特点,研制了一种利用金属膜连接传输线外筒与负载外筒,构成回路测量负载电流的探头。在传输线末端设计电容分压器作为测量负载电压的探头,并利用电路模拟软件对此过程进行模拟,同时这两个探头需要进行在线标定。实验研究结果表明,该探头性能稳定、响应快,是测量负载电流与电压的理想工具。     

Thermochemical process in preparation of ZnO film by TFA-MOD method

The excess weight loss due to the evaporation of zinc compound is observed in the growth of ZnO film by trifluoroacetate metalorganic deposition (TFA-MOD) method. Higher temperature (>90 °C) aging and/or addition of monoethanolamine (MEA) are effective to prevent the evaporation of zinc compound and increase the yield of ZnO. The mechanism of preventing evaporation is that zinc trifluoroacetate is hydrolyzed into Zn₄O(CF₃COO)₆. A three-dimensional structure of Zn₄O(CF₃COO)₆ is proposed. It is shown that higher temperature aging does harm to the surface morphology of ZnO films. The addition of MEA reduces the required aging temperature thus improves the surface morphology.