Characterization of Nineteen Impurities in Roxithromycin by HPLC/TOF and Ion Trap Mass Spectrometry

Nineteen impurities in roxithromycin drug substance made in China were separated and identified by HPLC–MSⁿ (TOF and TRAP) for the further improvement of official monographs in Pharmacopoeias. The fragmentation patterns and structural assignment of these impurities were studied. The column was Shim VP-ODS (250 × 4.6 mm, 5 μm). The mobile phase was 10 m mol L⁻¹ ammonium acetate and 0.1 % formic acid aqueous solution-acetonitrile (62.5:37.5). In positive mode, full scan LC–MS was first performed to obtain the m/z value of the protonated molecules and formulas of all detected peaks on Agilent 6538Q TOF high resolution mass spectrometer. LC–MS-MS and LC–MS-MS–MS were then carried out on the compounds of interest on AB SCIEX 4000 Q TRAP™ composite triple quadrupole/linear ion trap tandem mass spectrometer. The complete fragmentation patterns of nineteen impurities were studied and used to obtain information about the structures of these impurities. The structures of nineteen impurities in roxithromycin drug substance were deduced based on the HPLC–MSⁿ data, in which nine impurities were novel impurities.

     

A Novel Polysaccharide from Lentinus edodes Mycelia Exhibits Potential Antitumor Activity on Laryngeal Squamous Cancer Cell Line Hep-2

A novel polysaccharide [Lentinus edodes mycelia polysaccharide 2 (LMP2)] with a molecular weight of 2.27?×?10⁴ Da was isolated from the Lentinus edodes mycelia and purified by Sephadex G-200 and diethylaminoethyl-32 column chromatography. HPLC results indicated that LMP2 contained mannose, arabinose, galactose, xylose, and rhamnose with a relative molar ratio of 1:0.74:3.23:1.18:10.98. Its antitumor activity was evaluated in vitro by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay, colony formation assay, and transwell assay. LMP2 showed a remarkable inhibitory effect on the proliferation of Hep-2 cells, and at the concentration of 200 mg/ml, the inhibition ratio was 37.2 % after 72 h. Furthermore, colony formation of Hep-2 cells was reduced significantly after treatment with LMP2. Invasion of Hep-2 cells was inhibited significantly by LMP2. These results suggested that LMP2 could be explored as a potential antitumor material for laryngeal carcinoma.     

Adsorption of uranium from aqueous solution by graphene oxide nanosheets supported on sepiolite

Adsorptive behavior of uranium from aqueous solution on graphene oxide supported on sepiolite composites (GO@sepiolite composites) as a function of pH, ionic strength, temperature and initial uranium concentration was carried out by the batch techniques. GO@sepiolite composites was synthesized and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and potentiometric acid–base titration. According to XRD patterns and SEM images, the graphene oxide nanosheets were grafted on sepiolite surface successfully. The macroscopic results showed that the adsorption of uranium on GO@sepiolite composites was significantly depended on pH, whereas no effect of ionic strength on uranium adsorption at high pH and high ionic strength conditions was observed. The uptake equilibrium is best described by Langmuir adsorption isotherm, and the maximum adsorption capacity (Q_e) of GO@sepiolite composites at pH 5.0 and T = 298 K were calculated to be 161.29 mg/g. Thermodynamic results indicated that the adsorption of uranium on GO@sepiolite composites is the spontaneous and exothermic process.     

Effect of functionalized multiwall carbon nanotubes on the curing kinetics and reaction mechanism of bismaleimide–triazine

Functionalized multiwall carbon nanotubes (f-MWCNTs) with varying functionalization degrees were prepared by chemical methods. The effect of f-MWCNTs on the cure kinetics of bismaleimide–triazine (BT) resin was studied through nonisothermal differential scanning calorimetry (DSC) methods. The reaction activation energy (E _α ) was determined by Flynn–Wall–Ozawa method. The results show that f-MWCNTs have more acceleration ability than pristine MWCNTs, due to more groups on the surface of f-MWCNTs than that of pristine MWCNTs. The activation energy was decreased from a value of 91.3 kJ mol^?1 for the neat BT resin to 74.2 kJ mol^?1 at the small mass loading (1.0 %) of f7-MWCNTs. The effect of f-MWCNTs on the reaction mechanism has been investigated. It shows that the f-MWCNTs accelerate the cure reaction of BT resin by providing the Lewis acids (H⁺) to make the “Diels–Alder” reaction and “ENE” reaction of BT resins more efficient. These findings offer useful insights into the cure technology of thermosetting resin filled with f-MWCNTs, without negative effect on the cure reaction.     

MC8 Peptide-Mediated Her-2 Receptor Targeting Based on PEI-β-CyD as Gene Delivery Vector

A novel vector with high gene delivery efficiency and special cell targeting ability was developed using a good strategy that utilized low molecular weight polyethylenimine (PEI; molecular weight, 600 KDa [PEI600]) cross-linked to β-cyclodextrin (β-CyD) via a facile synthetic route. Human epidermal growth factor receptor 2 (Her-2) are highly expressed in a variety of human cancer cells and are potential targets for cancer therapy. MC8 peptides, which have been proven to combine especially with Her-2 on cell membranes were coupled to PEI-β-CyD using N-succinimidyl-3-(2-pyridyldithio) propionate as a linker. The ratios of PEI600, β-CyD, and peptide were calculated based on proton integral values obtained from the ¹H-NMR spectra of the resulting products. Electron microscope observations showed that MC8-PEI-β-CyD can efficiently condense plasmid DNA (pDNA) into nanoparticles of about 200 nm, and MTT assays suggested the decreased toxicity of the polymer. Experiments on gene delivery efficiency in vitro showed that MC8-PEI-β-CyD/pDNA polyplexes had significantly greater transgene activities than PEI-β-CyD/pDNA in the Skov3 and A549 cells, which positively expressed Her-2, whereas, no such effect was observed in the MCF-7 cells, which negatively expressed Her-2. Our current research indicated that the synthesized nonviral vector shows improved gene delivery efficiency and targeting specificity in Her-2 positive cells.     

Comprehensive Profiling by Non-targeted Stable Isotope Tracing Capillary Electrophoresis-Mass Spectrometry: A New Tool Complementing Metabolomic Analyses of Polar Metabolites

Mass spectrometry (MS) driven metabolomics is a frequently used tool in various areas of life sciences; however, the analysis of polar metabolites is less commonly included. In general, metabolomic analyses lead to the detection of the total amount of all covered metabolites. This is currently a major limitation with respect to metabolites showing high turnover rates, but no changes in their concentration. Such metabolites and pathways could be crucial metabolic nodes (e.g., potential drug targets in cancer metabolism). A stable-isotope tracing capillary electrophoresis–mass spectrometry (CE-MS) metabolomic approach was developed to cover both polar metabolites and isotopologues in a non-targeted way. An in-house developed software enables high throughput processing of complex multidimensional data. The practicability is demonstrated analyzing [U-¹³C]-glucose exposed prostate cancer and non-cancer cells. This CE-MS-driven analytical strategy complements polar metabolite profiles through isotopologue labeling patterns, thereby improving not only the metabolomic coverage, but also the understanding of metabolism.     

Facile Synthesis of Ultra-Small Few-Layer Nanostructured MoSe2 Embedded on N,P Co-Doped Bio-Carbon for High-Performance Half/Full Sodium-Ion and Potassium-Ion Batteries

Sodium/potassium-ion batteries (SIBs/PIBs) arouse intensive interest on account of the natural abundance of sodium/potassium resources, the competitive cost and appropriate redox potential. Nevertheless, the huge challenge for SIBs/PIBs lies in the scarcity of an anode material with high capacity and stable structure, which are capable of accommodating large-size ions during cycling. Furthermore, using sustainable natural biomass to fabricate electrodes for energy storage applications is a hot topic. Herein, an ultra-small few-layer nanostructured MoSe₂ embedded on N, P co-doped bio-carbon is reported, which is synthesized by using chlorella as the adsorbent and precursor. As a consequence, the MoSe₂/NP-C-2 composite represents exceedingly impressive electrochemical performance for both sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs). It displays a promising reversible capacity (523 mAh g⁻¹ at 100 mA g⁻¹ after 100 cycles) and impressive long-term cycling performance (192 mAh g⁻¹ at 5 A g⁻¹ even after 1000 cycles) in SIBs, which are some of the best properties of MoSe₂-based anode materials for SIBs to date. To further probe the great potential applications, full SIBs pairing the MoSe₂/NP-C-2 composite anode with a Na₃V₂(PO₄)₃ cathode also exhibits a satisfactory capacity of 215 mAh g⁻¹ at 500 mA g⁻¹ after 100 cycles. Moreover, it also delivers a decent reversible capacity of 131 mAh g⁻¹ at 1 A g⁻¹ even after 250 cycles for PIBs.     

Designing a Perylene Diimide/Fullerene Hybrid as Effective Electron Transporting Material in Inverted Perovskite Solar Cells with Enhanced Efficiency and Stability

Electron transport materials (ETM) play an important role in the improvement of efficiency and stability for inverted perovskite solar cells (PSCs). This work reports an efficient ETM, named PDI‐C₆₀, by the combination of perylene diimide (PDI) and fullerene. Compared to the traditional PCBM, this strategy endows PDI‐C₆₀ with slightly shallower energy level and higher electron mobility. As a result, the device based on PDI‐C₆₀ as electron transport layer (ETL) achieves high power conversion efficiency (PCE) of 18.6 %, which is significantly higher than those of the control devices of PCBM (16.6 %) and PDI (13.8 %). The high PCE of the PDI‐C₆₀‐based device can be attributed to the more matching energy level with the perovskite, more efficient charge extraction, transport, and reduced recombination rate. To the best of our knowledge, the PCE of 18.6 % is the highest value in the PSCs using PDI derivatives as ETLs. Moreover, the device with PDI‐C₆₀ as ETL exhibits better device stability due to the stronger hydrophobic properties of PDI‐C₆₀. The strategy using the PDI/fullerene hybrid provides insights for future molecular design of the efficient ETM for the inverted PSCs.     

A mussel‐inspired method to fabricate a novel reduced graphene oxide/Bi12O17Cl2 composites membrane for catalytic degradation and oil/water separation

In this study, a novel dopamine modified graphene‐based photocatalytic membrane with Bi₁₂O₁₇Cl₂ inserted was fabricated to modify the commercial cellulose acetate membrane via vacuum filtration method. Results showed the reduced graphene oxide (RGO)/poly(dopamine) (PDA)/Bi₁₂O₁₇Cl₂‐CA photocatalytic composite membrane exhibited 98% removal efficiency for methylene blue (MB) within 100 minutes and 96% removal efficiency for 4‐CP within 160 minutes. Importantly, the photocatalytic composite membrane can simultaneously achieve dye degradation and oil‐water separation in only one device within a short time. And the as‐prepared membrane displayed great antifouling performance and recyclability after 10 cycles. Meanwhile, the membrane showed excellent stability in the agitated water bath or different pH conditions. In summary, the photocatalytic membrane investigated in this study opens new avenue for treatment of wastewater.