Optimization of the abnormal Beckmann rearrangement: application to steroid 17-oximes

A novel and practical procedure was developed for the abnormal Beckmann rearrangement of steroid 17-oximes. Treatment of the 17-oximes with TFA/CH(OMe)(3) in boiling THF for 2 h gives the corresponding 13,17-seco alkene nitrile products in unprecedented high yields (70-92%). Since the alkene nitriles can be subsequently converted into 18-norsteroids, this general method provides a highly efficient route to these biologically important compounds and, by extension, to other structurally related natural products.     

Near-infrared fluorimetric determination of nucleic acids by shifting the ion-association equilibrium between heptamethylene cyanine and Alcian blue 8GX

A new method based on near-infrared (near-IR) fluorescence recovery, employing a two-reagent system which is composed of an anionic heptamethylene cyanine (HMC) and a polycationic phthalocyanine dye, Alcian blue 8GX, is presented for the determination of nucleic acids. With a maximum excitation wavelength at 766 nm and a maximum emission wavelength at 796 nm, the fluorescence recovery is linear with the concentration of nucleic acids added. Factors including the acidity of the medium, the reaction time, the optimal ratio of the two reagents, as well as the influence of foreign substance were all investigated. Meanwhile, the mechanism of fluorescence recovery was also studied. Under the optimal conditions, the linear ranges of the calibration curves were 10-250 ng ml⁻¹ for calf thymus DNA (CT DNA) and 10-200 ng ml⁻¹ for yeast RNA. The detection limits were 6.8 ng ml⁻¹ for CT DNA and 6.3 ng ml⁻¹ for yeast RNA, respectively. The method has been applied to the analysis of practical samples and the recovery results were satisfactory.     

Theoretical study of the surface energy and electronic structure of pyrite FeS2 (100) using a total-energy pseudopotential method, CASTEP

The geometric and electronic structures of FeS(2) (100) surface have been studied by a quantum-mechanical calculation using a total-energy pseudopotential code, CASTEP. The (100) surface is very stable and does not give any significant geometric relaxation. The electronic structure of FeS(2) (100) surface is characterized by the appearance of new native surface states in the bulk band gap, which correspond to antibonding mixed Fea-Ssp(3) states. These surface states play an important role as mediators of electron transfer on both anodic and cathodic sites in the incipient oxidation of pyrite. Moreover, the (100) surface has small band gaps and shows some metallic character. It is predicted that the rate of cathodic reductive reaction of O(2) in the incipient oxidation of pyrite is much faster than previously considered. The transport of electrons from the anodic sites to the cathodic sites on the (100) surface is faster and hole injection of anodic sites is not the rate-determining step. So we can deduce that the rate-determining step of incipient oxidation for pyrite consists of both electron transfer of pyrite/aqueous O(2) interface and the splitting of H(2)O.     

Electron energy loss studies of room-temperature co adsorption on Cu(100) induced by electron or ion irradiation

A custom-built multi-technique portable spectrometer was used to study the vibrational (and electronic) excitations associated with the “anomalous” CO adsorption recently observed on clean and oxidized Cu(100) surfaces at room temperature. Results from the electron energy loss (and thermal desorption) experiments have provided strong evidence for in-situ CO production induced by low-energy electron or ion irradiation of CO or C₂H₄ on Cu(100). In particular, the C-O vibrational stretch frequency for the room-temperature CO adsorption was found to be red-shifted by 9 meV from its nominal position (259 meV) and could be observed even at temperature as high as 420 K. Several plausible mechanisms involving coadsorbate interactions with CO on metal surfaces have been discussed. A direct interaction model involving partial bonding between CO, adsorbed on an atop site, and a coadsorbed O atom in a four-fold hollow site was found to be adequate in explaining the observed red shift and the apparent stabilization of CO on Cu(100) at room temperature.     

Hydroxylamine derivative in the Purex Process

N,Ndiethylhydroxylamine (DEHAN) can rapidly reduce Pu(IV) and Np(VI) extractable with trinbutyl phosphate (TBP) to Pu(III) and Np(V) unextractable with TBP in nitric acid solution. In order to apply DEHAN in the purification cycle step of U (noted as contactor 2D) of the secondcycle of the Purex Process to separate Np and Pu from U, the reduction of Np(VI) and the stability of Np(V) with DEHAN and the singlestage reduction extraction and backextraction of Np(VI) have been studied according to the experimental conditions of contactor 2D. The results show that more than 99% of Np(VI) can entirely be reduced to Np(V) with DEHAN within a few minutes either in aqueous or in organic phase containing uranium and without containing uranium, and more than 99% of Np(VI) can be backextracted from the organic to the aqueous phase with DEHAN as a reductant. More than 99% of Np(V) exists in nitric acid solution at least for 8 hours in presence of 0.01 mol/l DEHAN. These results are of benefit to the cascade extractionseparation of U/Np in contactor 2D in order to decontaminate Np from U.     

Synthesis of new 1,3-bis（phenylethynyl）disilazanes

Three new 1,3-bis(phenylethynyl)disilazanes were synthesized from the reaction of 1,3-dichlorodisilazanes with (phenylethy- nyl)lithium,and characterized by infrared (IR) spectra,nuclear magnetic resonance (NMR) and mass spectrometry (MS).     

Recent advances in single atom catalysts for the electrochemical carbon dioxide reduction reaction

The electrochemical carbon dioxide reduction reaction (CO₂RR) offers a promising solution to mitigate carbon emission and at the same time generate valuable carbonaceous chemicals/fuels. Single atom catalysts (SACs) are encouraging to catalyze the electrochemical CO₂RR due to the tunable electronic structure of the central metal atoms, which can regulate the adsorption energy of reactants and reaction intermediates. Moreover, SACs form a bridge between homogeneous and heterogeneous catalysts, providing an ideal platform to explore the reaction mechanism of electrochemical reactions. In this review, we first discuss the strategies for promoting the CO₂RR performance, including suppression of the hydrogen evolution reaction (HER), generation of C₁ products and formation of C₂₊ products. Then, we summarize the recent developments in regulating the structure of SACs toward the CO₂RR based on the above aspects. Finally, several issues regarding the development of SACs for the CO₂RR are raised and possible solutions are provided.

The electrochemical carbon dioxide reduction reaction (CO₂RR) offers a promising solution to mitigate carbon emission and at the same time generate valuable carbonaceous chemicals/fuels.     

Theoretical prediction of noble gas containing anions FNgO- (Ng = He, Ar, and Kr)

The structures and energies of the noble gas containing anions FNgO- (Ng = He, Ar, and Kr) have been calculated by high-level ab initio calculations. The FNgO- anions were found to be deep-energy minima at the singlet electronic state, and their energies are significantly lower than those at the triplet state. High dissociation energy barriers to Ng + OF- were also predicted. The unexpected stability of the FNgO- was due to the dramatic ion-induced O=Ng bond formation. The calculated results suggested possible experimental identification of the anionic species and even some related "ionic compounds" under cryogenic conditions.     

SiH2Cl2: ab initio anharmonic force field, dipole moments, and infrared vibrational transitions

The vibrational spectra of SiH2Cl2 have been recorded in the 1000-13,000 cm(-1) region, utilizing the Fourier-transform spectroscopy and Fourier-transform intracavity laser absorption spectroscopy. Totally 61 band centers and intensities are derived from the infrared spectra. An ab initio quartic force field is obtained by applying the second-order Moller-Plesset perturbation theory and correlation-consistent polarized valence triplet-zeta basis sets [J. Chem. Phys. 90, 1007 (1989); 98, 1358 (1993)]. Most observed bands are assigned by the vibration analysis based on the second-order perturbation theory. Reduced-dimensional ab initio dipole moment functions (two dimensional and three dimensional) have also been calculated to investigate the absolute band intensities of the SiH2 chromophore. The calculated values agree reasonably with the observed ones.