Organic Reactions in Ionic Liquids: Ionic Liquid Ethylammonium Nitrate–Promoted Knoevenagel Condensation of Meldrum's Acid With Aromatic Aldehydes

The Knoevenagel condensation of Meldrum's acid with aromatic aldehydes proceeded efficiently in a reusable ionic liquid, ethylammonium nitrate, at room temperature in the absence of any catalyst with high yields.     

An Efficient Synthesis of New Dispiropyrrolidine Derivatives via Three‐Component 1,3‐Dipolar Cycloaddition Reaction

A series of new dispiropyrrolidine derivatives were synthesized via the three‐component 1,3‐dipolar cycloaddition reaction of azomethine ylides generated in situ by the decarboxylative condensation of acenaphthenequinone and sarcosine or l ‐thioproline with 5‐benzylidene‐1,3‐dimethylpyrimidine‐2,4,6‐trione. The structures of the products were identified by IR, ¹H‐NMR, and HRMS spectra.     

Reductive Coupling of Aldehydes,Ketones and Aroyl Chlorides Induced by LVT Prepared from TiCl4/Al System

Aluminium powder has been used to reduce titanium tetrachloride to generate the low valent titanium (LVT)reagent which can induce the reductive coupling of aldehydes and ketones to form the corresponding pinacols or olefins. However, arylsulfonyl chlorides will give diaryldisulfides under the same condition.     

Phosphate Removal from Aqueous Solution by an Effective Clay Composite Material

Adsorption is an effective treatment process for removing phosphorus and thus controlling eutrophication. In this study, a clay composite material called Al–dolomite–montmorillonite (Al–DM) was prepared and characterized. Al–DM performed well with respect to phosphate removal, with its performance depending on the Al–DM loading, contact time, initial phosphorus concentration and initial solution pH. Adsorption mechanisms were investigated by conducting batch tests on phosphate adsorption using the Al–DM. The adsorption process fitted both the pseudo-second-order kinetics model and the intra-particle diffusion model. The Langmuir, Freundlich and BET models all adequately described the adsorption isotherm data. Thermodynamic studies showed that the adsorption process was endothermic and spontaneous in nature. Al–DM is an effective adsorbent for phosphate removal mainly due to its hierarchical porous structures as shown by characterization with SEM and EDS. Chemical changes occurring before and after adsorption in a water environment indicated that Al–DM had little negative effect on water quality.     

Synthesis of poly(l-lactic acid) with improved thermal stability by sulfonic acid-catalyzed melt/solid polycondensation

Melt/solid polycondensation (MP/SSP) is deemed as an alternative synthetic route besides ring-opening polymerization (ROP) in synthesizing poly(l-lactic acid) (PLLA). However, it is found that PLLA synthesized by MP/SSP has much poorer thermal stability than that by ROP due to more residual Sn(II) metallic catalyst in the former, but sulfonic acids does not show any detrimental effect on the thermal stability of PLLA. To synthesizing PLLA with good thermal stability by MP/SSP, a variety of commercially available sulfonic acids were screened as catalysts in MP/SSP of PLLA. Among these nonmetallic catalysts, it was found that 1,3-propanedisulfonic acid (PSA) and 1,5-naphthalene disulfonic acid (NSA) exhibited satisfactory catalytic reactivity and PLLAs with excellent thermal stability, high molecular weight, little coloration and good optical purity were successfully synthesized by MP/SSP. The decomposition temperature was increased by 80–100 °C in comparison to SnCl₂-catalyzed PLLA, and the thermal stability is comparable to commercial PLLA produced by ROP.     

Improvement in Uranium Adsorption Properties of Amidoxime-Based Adsorbent Through Cografting of Amine Group

Amidoxime (AO)/amine co-functionalized polypropylene fiber adsorbents were prepared. The all-polymeric structures were characterized by using Fourier transform infrared spectroscopy (FTIR), optical microscope, contact angle meter and electron spin resonance (ESR) analysis methods, confirming the grafting, modification, and amidoximation stages gravimetrically, spectroscopically, and visually. The properties for the removal of uranyl(VI) from aqueous solutions were investigated. For amidoxime (AO) fiber, high adsorption rate was observed within the first 30 minutes and the plateau value of 40.6% uranium loading (0.0812 mg/g) was reached at around 30 minutes. The adsorption equilibrium for AO/amine fiber was attained within 20 minutes, resulting in the adsorption of 92.6% uranium loading (0.185 mg/g). The percentage of adsorption increases with increasing pH value (2–6), reaches a maximum at pH 6.0 and then remains almost constant for AO/amine fiber, whereas reduces slightly for AO fiber.     

Curcumin Inhibits the Sortase A Activity of the Streptococcus mutans UA159

Streptococcus mutans (S. mutans) forms part of the commensal microflora and is deemed to be the major pathogen responsible for the generation of dental caries. The enzyme, sortase A enzyme, modulates the surface properties and cariogenicity of S. mutans. Curcumin has been reported to be an inhibitor of Staphylococcus aureus sortase A. In this study, inhibition of a purified S. mutans UA159 sortase A by curcumin was evaluated. Curcumin exerted strong inhibitory activity with a half maximal inhibitory concentration (IC₅₀) of 10.2?±?0.7 μM which was lower than the minimum inhibitory concentration of 175 μM and the minimum bactericidal concentration of 350 μM. These results indicated that curcumin is a S. mutans UA159 sortase A inhibitor and therefore represents as a promising anticaries agent.     

PMAA microgel surface-supported phase transfer catalyst as reusable microreactors for ultra-deep desulfurization

The reusable microreactors, poly(methacrylic acid) (PMAA) microgels surfacely covered with 3-(trimethoxysilyl)-propyldimethyloctadecyl ammonium chloride (AEM) and K₂{W(=O)(O₂)₂(H₂O)}₂ (W2) complexes, have been synthesized by using an ion exchange reaction between AEM located on PMAA microgels and W2 in aqueous solution. The final composite microspheres and intermediate products are characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, energy dispersive X-ray spectrophotometer, and thermogravimetric analysis, respectively. The results indicated the PMAA/AEM/W2 composite microspheres with surface-wrinkling morphology and core-shell structure. The feasibility of the composite microspheres used as reusable microreactors in catalytic oxidation of dibenzothiophene (DBT) was investigated. Additionally, the effects of some factors, including the amount of the microreactors, temperature, H₂O₂/DBT molar ratio, the loaded amount of AEM, DBT concentration, and recycling times, on the catalytic oxidation were examined. The results demonstrated that the prepared composite microspheres possess high catalytic performance and reusability in the catalytic oxidation of DBT.     

Impacts of some macromolecules on the characteristics of hydrogels prepared from pineapple peel cellulose using ionic liquid

Composite hydrogels were prepared from pineapple peel cellulose with the combinations of polyethylene glycol (PEG), polyvinyl alcohol (PVA), к-carrageenan (CN), or soluble starch (SH) in 1-allyl-3-methylimidazolium chloride solvent. Impacts of these macromolecules on the texture profile analysis (TPA) parameters, equilibrium swelling ratio (ESR), and sodium salicylate (NaSA) load of the prepared hydrogels were studied. The NaSA release kinetics of the composite hydrogels were also compared. The composite hydrogels exhibited differences in Fourier transform infrared spectroscopy (FTIR), TPA parameters, ESR, NaSA load ratio, and release kinetics. CN addition increased the hardness of the hydrogels, while PEG played an opposite role. SH and PVA could decrease hardness, gumminess, and resilience, and SH could increase the springiness and cohesiveness of the hydrogels. Most of the composite hydrogels exhibited the same basic FTIR features as the simple hydrogel. Freeze-dried composite hydrogels exhibited a markedly higher ESR than the oven-dried ones, and additions of PEG, PVA, CN, and SH showed the same effect. Addition of the PEG and PVA combination could lower the ESR of the hydrogels, whereas additions of the PEG and CN combination or PEG and SH combination could markedly increase the ESR of the hydrogels. Addition of PEG, PVA, CN, and SH respectively could increase the NaSA load ratio of the hydrogels. Oven-drying treatment, additions of the PEG and PVA combination or PEG and CN combination were propitious for extending the NaSA fast-release phase of the hydrogels.     

C?H Functionalization/Asymmetric Michael Addition Cascade Enabled by Relay Catalysis: Metal Carbenoid Used for C?C Bond Formation

A combination of either ruthenium(II) or rhodium(II) complexes and quinine‐derived squaramide enables 3‐diazooxindoles, indoles, and nitroalkenes to undergo highly efficient asymmetric three‐component reactions, thus affording optically active 3,3′‐bis(indole)s through a consecutive C C bond‐forming sequence, which turned out to be applicable to the facile total synthesis of (−)‐folicanthine.