介质对部分子劈裂几率的影响

利用部分子在热密QCD介质中的辐射谱, 研究部分子在热密介质中的演化规律. 研究结果表明, 在相同能量下介质诱导效应使得部分子在介质中的劈裂几率大于部分子在真空中的劈裂几率; 高密度介质中的部分子劈裂几率大于低密度介质中的劈裂几率. 本文研究结果与美国BNL/RHIC相对论重离子碰撞实验中观测到的高横动量强子产额压低现象一致, 揭示了在RHIC能区已经生成高温高密物质.     

PPC-based Reactive Hot Melt Polyurethane Adhesive(RHMPA)——Efficient Glues for Multiple Types of Substrates

Tens of billion metric tons of anthropogenic CO_2 discharged from the burning of fossil fuels lead to an enormous environmental and resource burden. It is charming to transform CO_2 to desirable, economical chemicals and materials. Poly(propylene carbonate)(PPC) is an emerging CO_2-based material. Herein, we report the design, synthesis and characterization of the reactive hot melt polyurethane adhesive(RHMPA) based on PPC polyol. The resultant RHMPAs exhibit good adhesion properties to multiple substrates including plastics(PC, PMMA, ABS) and metals(aluminium, steel), which is comparable to or even better than conventional RHMPAs prepared from petro-based polyol. Furthermore, the PPC-based RHMPAs have tunable mechanical properties, and are thermally stable in the typical working range of bonding process(up to 270 °C). The study is expected to expand the applications of PPC and provide a new type of CO_2-based renewable and eco-friendly materials.     

Realizing fast photoinduced recovery with polyfluorene-block-poly(vinylphenyl oxadiazole) block copolymers as electret in photonic transistor memory devices

Photonic field-effect transistor (FET) memory devices offer unique advantages owing to their solution processability, low cost production, and their lightweight and structural flexibility. Despite the plethora of research demonstrated the photon based programming process, limited reports are available for photoinduced recovery mechanism in such devices. To investigate the influence of polymer electret design on photonic memory performance, poly(9,9-dioctylfluorene) (PFO)–block–poly (vinylphenyl oxadiazole) (POXD) conjugated block copolymers were employed to a photonic FET memory with n-type semiconducting channel. The studied device exhibited bistable ON/OFF current states after electrical programming and photoinduced recovery (erasing) processes. The device operating mechanism was elaborated by comparing the device performance with respective electrets of PFO-b-POXD and PFO-b-polystyrene (PS) and PFO homopolymer. We found that PFO-b-POXD can efficiently generate photoexciton under UV illumination to neutralize the trapped hole, and assuage the hole trapping propensity of PFO segment, simultaneously. By optimizing the POXD content in the block copolymer, a decent memory ratio (I_ON/I_OFF) of ~10⁵ was achieved after 10⁴ s, indicating its superior long-term stability and data discernibility. This research shows the judicious strategy to design polymer electret for photonic memory, and it opens up the possibility of developing photonic memory, human perception and futuristic communication systems using simple, convenient and reliable optoelectronic technique.     

Relaxation Oscillation of Thermal Convection in Rotating Cylindrical Annulus

Chaotic thermal convection in a rapidly rotating cylindrical annulus is investigated numerically and the relaxation oscillation state is obtained under the no-slip boundary condition. The dominant frequency of the oscillation is inherited directly from a vacillating mode, whose nonlinear interaction with another high-frequency vacillating mode leads to the chaotic state at high Rayleigh numbers through an RTN-type route. Furthermore, the effects of Coriolis parameter and Rayleigh number on the quasi-periodic burst of kinetic energy are discussed as well.     

Electrochemical study on screen-printed carbon electrodes with modification by iron nanoparticles in Fe(CN)<Subscript>6</Subscript><Superscript>4−/3−</Superscript> redox system

The remarkable enhancement of electron transfer on screen-printed carbon electrodes (SPCEs) with modification by iron nanoparticles (Fe_nano), coupled with Fe(CN)₆ ^4−/3− redox species, was characterized with an increase of electroactive area (A _ea) at electrode surface together with a decrease of heterogeneous electron transfer rate constant (k°) in the system. Hence, Fe_nano-Fe(CN)₆ ³⁻ SPCEs with deposition of glucose oxidase (GOD) demonstrated a higher sensitivity to various glucose concentrations than Fe(CN)₆ ³⁻/GOD-deposited SPCEs. In addition, an inhibited diffusion current from cyclic voltammograms was also observed with an increase in redox concentration and complicated the estimation of A _ea. Further analysis by the electrochemical impedance method, it was shown that this effect might be resulted from the electrode surface blocking by the products of activated complex decomposition.     

New side chain ferroelectric liquid crystalline polymers based on (2S, 3S)-2-chloro-3-methylpentanoic acid: synthesis and phase behaviour

The synthesis of four new chiral mesogenic monomers (M₁–M₄) and side chain ferroelectric liquid crystalline polymers containing (2S, 3S)-2-chloro-3-methylpentanoate is described. The chemical structures and phase behaviour of the monomers and polymers obtained in this study were characterised by Fourier transform infrared, proton nuclear magnetic resonance, polarising optical microscopy, differential scanning calorimetry, thermogravimetric analysis and X-ray diffraction. The selective reflection of light was investigated with ultraviolet/visible (UV/Vis). Their structure–mesomorphism relationships were discussed. M₁ and P₁ all showed a chiral smectic C (SmC*) phase. M₂ and M₃ revealed a SmC* phase and cholesteric phase, while their corresponding polymers P₂ and P₃ revealed a SmC* phase and smectic A (SmA) phase. M₄ only exhibited a cholesteric phase, whereas the corresponding polymers P₄ showed a SmA phase. Moreover, the selective reflection of light shifted to the long-wavelength region at the SmC* phase range and to the short-wavelength region at the cholesteric range with increasing temperature, respectively. The results seemed to demonstrate that the tendency towards melting temperature (T_m), glass transition temperature (T_g), isotropic temperature (T_i) and mesophase range for the monomers and polymers increased by increasing the mesogenic core rigidity or the number of phenyl ring. The polymerisation effect could lead to higher liquid crystalline to isotropic phase transition temperature, wider mesophase range and more ordered smectic phase formed. In addition, all the obtained polymers had a very good thermal stability and the corresponding T_d increased by increasing the number of phenyl ring.     

Solution-shear-processed quaterrylene diimide thin-film transistors prepared by pressure-assisted thermal cleavage of swallow tails

A scalable synthesis of swallow-tailed quaterrylene diimides (STQDIs) and a method for the solution processing of sparingly soluble quaterrylene diimide (QDI) thin films are described. The pressure-assisted thermal cleavage of swallow tails yields crystalline QDI layers with electron mobility up to 0.088 cm(2) V(-1) s(-1). The developed method opens up a new route toward the solution processing of higher rylene diimides with poor solubility.     

Electrical and structural properties of a stacked metal layer contact to n-InP

In this study, we found that the double metal contact structure in Pt/Al/n-InP diodes provides better rectification characteristics than conventional single-metal/n-InP Schottky diodes. The effective barrier height was measured to be 0.67 eV for a 400 °C-annealed Pt/Al/n-InP diode sample. The increase in the barrier height is attributed to the formation of Al₂O₃ at the metal/n-InP contact interface during thermal annealing. The formation of the phase Al₂O₃ phase was monitored by X-ray diffraction (XRD) analysis. The corresponding element profiles of Al and O were also confirmed at the metal/n-InP contact interface using secondary ion mass spectrum (SIMS) analysis. The lowering of the Schottky barrier height due to the inhomogeneity at the metal/n-InP junction is also discussed on the basis of the TE theory. The distribution of local effective Schottky barrier heights was explained by a model incorporating the existence of double Gaussian barrier heights, which represent the high barrier and low barrier of the full distribution in the temperature ranges of 83-198 and 198-300 K.     

Effects of chain architectures on the surface structures of conjugated rod-coil block copolymer brushes

Rod-coil block copolymers are of unique and interesting characteristics since their physical properties can be reversibly tuned in response to the external stimuli, such as change in solvent quality. In this study, dissipative particle dynamics is used to investigate the surface structures of rod-coil polymer brushes tethered onto a surface. When immersed in the selective solvent for the coil blocks, rod blocks tend to form aggregates. Our results show that linear and Y-shaped polymer brushes exhibit similar aggregative behavior. However, some of the surface structures can be acquired within experimentally attainable surface grafting density only for Y-shaped polymer brushes. On the other hand, comblike polymer brushes are found to possess more diverse aggregative manners than linear brushes. Surface structures with aggregates taking the forms of cones, cylinders, or layers of spheres are found. By controlling the aggregative structures, it is possible for us to adjust the physical properties, such as optical function, of the material.     

Theoretical and experimental studies on the surface structures of conjugated rod-coil block copolymer brushes

A combined theoretical and experimental investigation of conjugated rod-coil block copolymer brushes is reported. The theoretical study for the surface structures of rod-coil block copolymer brushes was established based on the simulation method of dissipative particle dynamics. The effects of solvent stimuli, grafting density, and rod-coil block ratio of the polymer brushes on the surface structures were examined. The rod blocks of polymer brushes were found to be well-dispersed on the surface in their good solvents. On the other hand, aggregative domains of the rod blocks were formed in their poor solvents with the conformations of isolated islands or worm-like structures depending on the grafting density of the polymer brushes. The aggregative domains tend to stay on top of the coil blocks for small rod-to-coil block ratio. However, the submergence of the aggregative domains into the coil blocks is thermodynamically preferred for large enough rod-to-coil block ratio. New multifunctional amphiphilic rod-coil block copolymers, poly-[2,7-(9,9-di-n-hexylfluorene)]-block-poly-[poly(ethylene glycol) methyl ether methacrylate]-block-poly-[3(tripropoxysilyl)propyl methacrylate] (PF-b-PPEGMA-b-PPOPS), with two different block ratios were synthesized and used to prepare the corresponding polymer brushes via the grafting- method. The effects of stimuli factors on the surface structures characterized by the atomic force microscopy images were consistent with the theoretical results. Furthermore, the photophysical properties of PF-b-PPEGMA-b-PPOPS brushes were significantly varied by the solvent stimuli. The emission peaks originated from the aggregation and/or excimer formation of PF blocks were observed after methanol treatment. The photoluminescence intensity and its efficiency were well correlated to the surface structure and the methanol content in mixed solvents. Our study demonstrates how the surface structures and photophysical properties of rod-coil block copolymer brushes response to environmental stimuli.