Topological origin of stretched exponential relaxation in glass

The physical origin of stretched exponential relaxation is considered by many as one of the oldest unsolved problems in science. The functional form for stretched exponential relaxation can be deduced from the axiomatic diffusion-trap model of Phillips. The model predicts a topological origin for the dimensionless stretching exponent, with two "magic" values emerging: β = 3/5 arising from short-range molecular relaxation pathways and β = 3/7 for relaxation dominated by longer-range interactions. In this paper, we report experimental confirmation of these values using microscopically homogeneous silicate glass specimens. Our results reveal a bifurcation of the stretching exponent, with β = 3/5 for stress relaxation and β = 3/7 for structural relaxation, both on macroscopic length scales. These results point to two fundamentally different mechanisms governing stress relaxation versus structural relaxation, corresponding to different effective dimensionalities in configuration space during the relaxation process.     

Simple, nitrogen-rich, energetic salts of 5-nitrotetrazole

A new family (ammonium, 1, hydrazinium, 2, guanidinium, 3, aminoguanidinium, 4, diamino-guanidinium, 5, and triaminoguanidinium, 6) of simple, nitrogen-rich energetic salts based on 5-nitro-2 H-tetrazole (HNT) were synthesized. In addition, the hemihydrate of 1 (1a) and the hydrate of 6 (6a) were also isolated. In all cases, stable salts were obtained and fully characterized by vibrational (IR, Raman) spectroscopy, multinuclear ((1)H, (13)C and (14)N) NMR spectroscopy, mass spectrometry, elemental analysis, and X-ray structure determination. Compounds 1and 2 crystallize in the monoclinic space group P2 1/c, 1a and 3 crystallize in C/2 c, 4 in P2 1/n, 5 in P2 1, 6 in orthorhombic P2 12 12 1, and 6a in triclinic P1. Initial safety testing (impact, friction, and electrostatic sensitivity) and thermal stability measurements (DSC) were also carried out. The NT salts all exhibit good thermal stabilities (decomposition above 150 degrees C). The constant volume energies of combustion (Delta c U(exp)) of 1-6 were experimentally determined by oxygen bomb calorimetry to be -1860(30) cal/g ( 1), -1770(30) cal/g ( 1a), -2110(150) cal/g (2), -2250(40) cal/g ( 3), -2470(30) cal/g (4), -2630(40) cal/g (5), -2690(50) cal/g (6), and -2520(50) cal/g (6a). Because of the significant experimental uncertainties obtained in these measurements, their validity was checked by way of quantum chemical calculation (MP2) of electronic energies and an approximation of lattice enthalpy. The predicted constant volume energies of combustion (Delta c U(pred)) calculated by this method were -2095.9 cal/g (1), -1975.7 cal/g ( 1a), -2362.4 cal/g (2), -2526.6 cal/g (3), -2654.6 cal/g (4), -2778.6 cal/g ( 5), -2924.0 cal/g (6), and -2741.4 cal/g ( 6a). From the experimentally determined density, chemical composition, and energies of formation (back calculated from the heats of combustion) the detonation pressures and velocities of 1 (7950 m/s, 23.9 GPa), 1a (7740 m/s, 22.5 GPa), 2(8750 m/s, 30.1 GPa), 3 (7500 m/s, 20.1 GPa) 4(8190 m/s, 24.7 GPa), 5(8230 m/s, 24.4 GPa), 6 (8480 m/s, 26.0 GPa) and 6a (7680 m/s, 20.7 GPa) were predicted using the EXPLO5 code.     

Gemmacin B: bringing diversity back into focus

Through the synthesis of a focused library and SAR investigations, a more potent analogue of gemmacin (discovered in a previous diversity-oriented synthesis (DOS) campaign), gemmacin B, was discovered.     

Rapid catalyst identification for the synthesis of the pyrimidinone core of HIV integrase inhibitors

A microscale chemistry improvement engine: a pre-dosed microscale high-throughput experimentation additives platform enables rapid, serendipitous reaction improvement. This platform allowed one chemist to set up 475 experiments and analyze the results using MISER chromatography in a single day, thus resulting in two high-quality catalytic systems for the construction of the title compound 1. Support for a single-electron transfer mechanism was obtained.     

The multifacility maximin planar location problem with facility interaction

^** Email: s.salhi{at}kent.ac.uk Two branch-and-bound algorithms are proposed to optimally solvethe maximin formulation for locating p facilities in the plane.Tight upper and lower bounds are constructed and suitable methodsof guiding the search developed. To enhance the method, efficientmeasures for identifying specific squares for subdivision aresuggested. The proposed algorithms are evaluated on a set ofrandomly generated problems of up to five facilities and 120nodes.     

Quantitative determination of capsaicinoids by liquid chromatography–electrospray mass spectrometry

Eight naturally occurring capsaicinoids have been determined in Capsicum by use of high-purity standards, with norcapsaicin as an internal standard. The solid standards were rigorously checked for purity. The sensitivity of electrospray ionization (ESI), atmospheric-pressure chemical ionization (APCI), and coordination ion-spray (CIS; with silver) toward the capsaicinoids were measured and compared. The highest sensitivity was found for positive-ion ESI. Method validation of the liquid chromatography–ESI-mass spectrometry (LC–ESI-MS) determination is reported, including tests for repeatability (4%), detection limit (5 pg injected), linear range (20–6 ng injected), quantitation (excellent linearity; <2% relative standard deviation), and recovery (99–103%). The major and minor capsaicinoids in a commercial plant extract and in chili pepper fruits were quantified.Electronic Supplementary Material Supplementary material is available for this article at     

Computational study of sulfoxides of thiacyclohexane, 4‐silathiacyclohexane, 4‐fluoro‐4‐silathiacyclohexane,and 4,4‐difluoro‐4‐silathiacyclohexane: Relative energies of conformations and sulfinyl oxygen stabilized pentacoordinate silicon in boat and twist structures

Second‐order Møller‐Plesset theory (MP2) has been used to calculate the equilibrium geometries and relative energies of the chair, 1,4‐twist, 2,5‐twist, 1,4‐boat, and 2,5‐boat conformations of thiacyclohexane 1‐oxide (tetrahydro‐2H‐thiopyran 1‐oxide), 4‐silathiacyclohexane 1‐oxide, cis‐ and trans‐4‐fluoro‐4‐silathiacyclohexane 1‐oxide, and 4,4‐difluoro‐4‐silathiacyclohexane 1‐oxide. At the MP2/6‐311+G(d,p) level of theory, the chair conformer of axial thiacyclohexane 1‐oxide is 0.99, 5.61, 5.91, 8.57, and 7.43 kcal/mol more stable (ΔE) than its respective equatorial chair, 1,4‐twist, and 2,5‐twist conformers and 1,4‐boat and 2,5‐boat transition states. The chair conformer of equatorial thiacyclohexane 1‐oxide is 4.62, 6.31, 7.56, and 7.26 kcal/mol more stable (ΔE) than its respective 1,4‐twist and 2,5‐twist conformers and 1,4‐boat and 2,5‐boat transition states. The chair conformer of axial 4‐silathiacyclohexane 1‐oxide is 1.79, 4.26, 3.85, and 5.71 kcal/mol more stable (ΔE) than its respective equatorial chair, 1,4‐twist, and 2,5‐twist conformers and 2,5‐boat transition state. The 2,5‐twist conformer of axial 4‐silathiacyclohexane 1‐oxide is stabilized by a transannular interaction between the sulfinyl oxygen and silicon, to give trigonal bipyramidal geometry at silicon. The chair conformer of equatorial 4‐silathiacyclohexane 1‐oxide is 2.47, 7.90, and 8.09 kcal/mol more stable (ΔE) than its respective 1,4‐twist, and 2,5‐twist conformers and 2,5‐boat transition state. The chair conformer of axial cis‐4‐fluoro‐4‐silathiacyclohexane 1‐oxide is 4.18 and 5.70 kcal/mol more stable than its 1,4‐twist conformer and 2,5‐boat transition state and 1.51 kcal/mol more stable than the chair conformer of equatorial cis‐4‐fluoro‐4‐silathiacyclohexane 1‐oxide. The chair conformer of axial trans‐4‐fluoro‐4‐silathiacyclohexane 1‐oxide is 5.02 and 6.11 kcal/mol more stable than its respective 1,4‐twist conformer and 2,5‐boat transition state, but is less stable than its 2,5‐twist conformer (ΔE = ?1.77 kcal/mol) and 1,4‐boat transition state (ΔE = ?1.65 kcal/mol). The 2,5‐twist conformer and 1,4‐boat conformer of axial trans‐4‐fluoro‐4‐silathiacyclohexane 1‐oxide are stabilized by intramolecular coordination of the sulfinyl oxygen with silicon that results in trigonal bipyramidal geometry at silicon. The chair conformer of axial 4,4‐difluoro‐4‐silathiacyclohexane 1‐oxide is 3.02, 5.16, 0.90, and 6.21 kcal/mol more stable (ΔE) than its respective equatorial chair, 1,4‐twist, and 1,4‐boat conformers and 2,5‐boat transition state. The 1,4‐boat conformer of axial 4,4‐difluoro‐4‐silathiacyclohexane 1‐oxide is stabilized by a transannular coordination of the sulfinyl oxygen with silicon that results in a trigonal bipyramidal geometry at silicon. The relative energies of the conformers and transition states are discussed in terms of hyperconjugation, orbital interactions, nonbonded interactions, and intramolecular sulfinyl oxygen–silicon coordination. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Effect of extra-column volume on practical chromatographic parameters of sub-2-μm particle-packed columns in ultra-high pressure liquid chromatography

Effects of extra-column volume on apparent separation parameters were studied in ultra-high pressure liquid chromatography with columns and inlet connection tubings of various internal diameters (id) using 50-mm long columns packed with 1.8-μm particles under isocratic conditions. The results showed that apparent retention factors were on average 5, 11, 18, and 41% lower than those corrected with extra-column volumes for 4.6-, 3.0-, 2.1-, and 1.0-mm id columns, respectively, when the extra-column volume (11.3 μL) was kept constant. Also, apparent pressures were 31, 16, 12, and 10% higher than those corrected with pressures from extra-column volumes for 4.6-, 3.0-, 2.1-, and 1.0-mm id columns at the respective optimum flow rate for a typical ultra-high pressure liquid chromatography system. The loss in apparent efficiency increased dramatically from 4.6- to 3.0- to 2.1- to 1.0-mm id columns, less significantly as retention factors increased. The column efficiency was significantly improved as the inlet tubing id was decreased for a given column. The results suggest that maximum ratio of extra-column volume to column void volume should be approximately 1:10 for column porosity more than 0.6 and a retention factor more than 5, where 80% or higher of theoretically predicted efficiency could be achieved.     

Metallization of a genetically engineered polypeptide

Recently, well-ordered biological materials have been exploited to pattern inorganic nanoparticles into linear arrays that are of particular interest for nanoelectronic applications. In this work, a de novo designed E. coli-expressed polypeptide (previously shown to form highly rectilinear, β-sheet-containing structures) operates as a template for divalent metal cations. EDX and TEM analysis verify the attachment of platinum ions to the histidine-rich fibril surface, which was designed specifically to facilitate attachment of chemical moieties. Following chemical reduction, TEM further confirms the formation of localized zero-valent metal aggregates with sub-nanometer interparticle spacing.     

Ni, Pd, Pt, and Ru complexes of phosphine-borate ligands

The species Cy(2)PHC(6)F(4)BF(C(6)F(5))(2) reacts with Pt(PPh(3))(4) to yield the new product cis-(PPh(3))(2)PtH(Cy(2)PC(6)F(4)BF(C(6)F(5))(2)) 1 via oxidative addition of the P-H bond of the phosphonium borate to Pt(0). The corresponding reaction with Pd(PPh(3))(4) affords the Pd analogue of 1, namely, cis-(PPh(3))(2)PdH(Cy(2)PC(6)F(4)BF(C(6)F(5))(2)) 3; while modification of the phosphonium borate gave the salt [(PPh(3))(3)PtH][(tBu(2)PC(6)F(4)BF(C(6)F(5))(2))] 2. Alternatively initial deprotonation of the phosphonium borate gave [tBu(3)PH][Cy(2)PC(6)F(4)BF(C(6)F(5))(2)] 4, [SIMesH][Cy(2)PC(6)F(4)BF(C(6)F(5))(2)] 5 which reacted with NiCl(2)(DME) yielding [BaseH](2)[trans-Cl(2)Ni(Cy(2)PC(6)F(4)BF(C(6)F(5))(2))(2)] (Base = tBu(3)P 6, SIMes 7) or with PdCl(2)(PhCN)(2) to give [BaseH](2)[trans-Cl(2)Pd(Cy(2)PC(6)F(4)BF(C(6)F(5))(2))(2)] (Base = tBu(3)P 8, SIMes 9). While [C(10)H(6)N(2)(Me)(4)H][tBu(2)PC(6)F(4)BF(C(6)F(5))(2)] 10 was also prepared. A third strategy for formation of a metal complex of anionic phosphine-borate derivatives was demonstrated in the reaction of (COD)PtMe(2) with the neutral phosphine-borane Mes(2)PC(6)F(4)B(C(6)F(5))(2) affording (COD)PtMe(Mes(2)PC(6)F(4)BMe(C(6)F(5))(2)) 11. Extension of this reactivity to tBu(2)PH(CH(2))(4)OB(C(6)F(5))(3)) was demonstrated in the reaction with Pt(PPh(3))(4) which yielded cis-(PPh(3))(2)PtH(tBu(2)P(CH(2))(4)OB(C(6)F(5))(3)) 12, while the reaction of [SIMesH][tBu(2)P(CH(2))(4)OB(C(6)F(5))(3)] 13 with NiCl(2)(DME) and PdCl(2)(PhCN)(2) afforded the complexes [SIMesH](2)[trans-Cl(2)Ni(tBu(2)PC(4)H(8)OB(C(6)F(5))(3))(2)] 14 and [SIMesH](2)[trans-PdCl(2)(tBu(2)P(CH(2))(4)OB(C(6)F(5))(3))(2)] 15, respectively, analogous to those prepared with 4 and 5. Finally, the reaction of 7 and 13with [(p-cymene)RuCl(2)](2) proceeds to give the new orange products [SIMesH][(p-cymene)RuCl(2)(Cy(2)PC(6)F(4)BF(C(6)F(5))(2))] 16 and [SIMesH][(p-cymene)RuCl(2)(tBu(2)P(CH(2))(4)OB(C(6)F(5))(3))] 17, respectively. Crystal structures of 1, 6, 10, 11, 12, and 16 are reported.