Spectral tuning of InGaAs/GaAs quantum dot infrared photodetectors with bandpass guided‐mode resonance filters

Quantum dot infrared photodetectors can be coupled with micro‐structured filters to create narrowband sensors. Guided‐mode resonance filters based on a high‐index dielectric slab can exhibit bandpass characteristics that are suitable for monolithic integration with focal‐plane arrays. Here, patterned Ge filters were integrated with InGaAs/GaAs quantum dot detectors to linearly tune their 77 K photoresponse peaks from 5.6 µm to 6.2 µm. The dark current was not influenced by these filters but the ability to narrow the photoresponse linewidth was limited by substrate scattering, which is often encountered with front‐side illumination architectures. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

气体开关抖动对单模块快脉冲直线型变压器驱动源输出特性的影响

分析了快脉冲直线型变压器驱动源(FLTD)气体开关触发击穿延时的分布规律,利用MAT-LAB软件生成随机序列模拟开关击穿延时和抖动,在FLTD简化二阶电路的基础上,利用MATLAB分析了开关抖动对40个支路并联1 MA,100 ns FLTD模块输出电流脉冲前沿和幅值的影响。模拟计算结果表明:开关理想时,即抖动为0,输出电流峰值为996 kA,峰值时间为90 ns,10%~90%脉冲前沿为54 ns;开关自身抖动与开关之间分散性之和为10 ns时,输出电流脉冲前沿增加约14%,电流峰值下降约2%;开关自身抖动与开关之间分散性之和为20 ns时,输出电流脉冲前沿增加约38%,电流峰值下降约5%。     

A novel optical beam splitter based on photonic crystal with hybrid lattices

A novel optical beam splitter constructed on the basis of photonic crystal(PC) with hybrid lattices is proposed in this paper.The band gap of square-lattice PC is so designed that the incident light is divided into several branch beams.Triangular-lattice graded-index PCs are combined for focusing each branch.Computational calculations are carried out on the basis of finite-different time-domain algorithm to prove the feasibility of our design.The waveguide is unnecessary in the design.Thus the device has functions of both splitting and focusing beams.Size of the divided beam at site of full-width at half-maximum is of the order of λ/2.The designed splitter has the advantages that it has a small volume and can be integrated by conventional semiconductor manufacturing process.     

有限自由度系统的定域Lie对称性和守恒量

研究有限自由度系统定域Lie对称性的正问题和逆问题。给出了定域Lie对称性的定义、确定方程、结构方程和守恒量。进一步从定域Lie对称性导出在有限连续群无限小变换下的Lie对称性。最后给出一个例子去说明这些结果。     

A horn ridge waveguide DFB laser with reduced spatial hole burning for high-speed modulation

In this paper, we propose a DFB laser with a horn ridge waveguide (HRW) to suppress the longitudinal spatial hole burning (LSHB) effect in the lasers cavity, thus to reduce the rolloff at low frequency. The simulation result shows that HRW DFB lasers could significantly suppress the LSHB effect and its modulation bandwidth is increased by 14% comparing with the conventional straight ridge waveguide (RW) DFB lasers when the normalized coupling coefficient (κL) is 3.0. The calculated eye diagrams of HRW DFB lasers under direct 25 Gbps modulation have clearer opening than that of the conventional RW DFB lasers. These superior properties are due to the suppression of the LSHB effect by the HRW structure.     

A tunable infrared plasmonic polarization filter with asymmetrical cross resonator

A tunable infrared plasmonic polarization filter is proposed and investigated in this paper. The filter is based on the sandwich absorption structure which consists of three layers. The top layer is an array of asymmetrical cross resonator.The middle and bottom layers are dielectric spacer and metal film respectively. By absorbing specific wavelength of the incident light perfectly, the reflection spectrum of the structure shows filter performance. The calculated results show that the absorption wavelength is strongly dependent on the length of branch of the asymmetrical cross resonator which is parallel to the light polarization and independent of the length of the vertical one. Therefore, the asymmetrical cross resonator filter structure opens the way for freely tuning the filtering wavelength for a different light polarization. We can fix a resonant wavelength(absorption wavelength) corresponding to one polarization and change the resonant wavelength for the other polarization by adjusting the corresponding branch length of the asymmetrical cross resonator, or change the two resonant wavelengths of both two polarizations at the same time.     

Metal/semiconductor hybrids consisting of self-assembled CdS nanoparticles on Cd nanowires

We report on the synthesis and the characterisation of metal/semiconductor hybrids consisting of self-assembled CdS nanoparticles on Cd nanowires, which are grown by thermal evaporation of the mixture of CdS and Cr. The growth of the hybrids is attributed to the decomposition of CdS at high temperature and the strain relieving that arises mainly from the lattice mismatch between Cd and CdS. Temperature dependence of zero-field resistance of single nanohybrid indicates that the as-produced Cd/CdS nanohybrid undergoes a metal--semiconductor transition as a natural consequence of hybrid from metallic Cd and semiconducting CdS. The metal/semiconductor hybrid property provides a promising basis for the development of novel nanoelectronic devices.     

High temperature thermoelectric properties of highly c-axis oriented Bi₂Sr₂Co₂O_y thin films fabricated by pulsed laser deposition

High-temperature thermoelectric transport property measurements have been performed on the highly c-axis oriented Bi2Sr2Co2Oy thin films prepared by pulsed laser deposition on LaAlO3(001).Both the electric resistivity ρ and the seebeck coefficient S of the film exhibit an increasing trend with the temperature from 300 K-1000 K and reach up to 4.8 m·Ω· cm and 202 μV/K at 980 K,resulting in a power factor of 0.85 mW/mK which are comparable to those of the single crystalline samples.A small polaron hopping conduction can be responsible for the conduction mechanism of the film at high temperature.The results demonstrate that the Bi2Sr2Co2Oy thin film has potential application in high temperature thin film thermoelectric devices.     

由单负材料组成的一维对称型光子晶体中的隧穿模

由电单负材料A和磁单负材料B构成了一维对称型光子晶体,数值计算表明其带隙中出现了一隧穿模. 材料层数增加,隧穿模宽度急剧变窄,而其位置不变.隧穿模的位置和宽度对入射角的变化都不太敏感. 材料的几何厚度减小,隧穿模的位置蓝移,而其宽度不变. μ_A, ε_B增加,隧穿模的位置红移,宽度减小. 利用隧穿模的以上特性可以实现对电磁波传播的动态调控.     

Fringe pattern denoising using averaging based on nonlocal self-similarity

Digital image processing for fringe patterns is an important procedure in optical interferometry. Filtering off noise from fringe patterns is one of the key tasks for extraction of the phase field. Spin filters proposed by Yu et al. [Appl. Opt. 33(1994), 41(2002), et al.] have been proven to be effective denoising methods. In this paper, we develop a nonlocal self-similarity filter, which averages similar pixels searched for in whole image instead of in a local fringe direction as the spin filters do. Although simple and free of the fringe orientation estimation, involving more pixels with higher similarity levels, our algorithm has stronger robustness against noise and thus denoises fringe patterns more effectively. Simulation and experimental results show that our algorithm outperforms related filters both in preserving smooth fringes and in reducing blurring effects and quantitative errors.