Environmentally friendly solid‐phase microextraction coupled with gas chromatography and mass spectrometry for the determination of biogenic amines in fish samples

In this work, a facile and environmentally friendly solid‐phase microextraction assay based on on‐fiber derivatization coupled with gas chromatography and mass spectrometry was developed for determining four nonvolatile index biogenic amines (putrescine, cadaverine, histamine, and tyramine) in fish samples. In the assay, the fiber was firstly dipped into a solution with isobutyl chloroformate as derivatization reagent and isooctane as extraction solvent. Thus, a thin organic liquid membrane coating was developed. Then the modified fiber was immersed into sample solution to extract four important bioamines. Afterwards, the fiber was directly inserted into gas chromatography injection port for thermal desorption. 1,7‐Diaminoheptane was employed as internal standard reagent for quantification of the targets. The limits of detection of the method were 2.98–45.3 μg/kg. The proposed method was successfully applied to the detection of bioamines in several fish samples with recoveries ranging 78.9–110%. The organic reagent used for extraction was as few as microliter that can greatly reduce the harm to manipulator and environment. Moreover, the extraction procedures were very simple without concentration and elution procedures, which can greatly simplify the pretreatment process. The assay can be extended to the in situ screening of other pollutant in food safety by changing the derivatization reagent.     

Metabolomics method based on ultra high performance liquid chromatography with time‐of‐flight mass spectrometry to analyze toxins in fresh and dried toad venom

Drying is a critical step to prolong the storage time in natural medicine processing but it changes the chemical characteristics of the product. In this study, research was performed to characterize the metabolomic changes in toad venom induced by vacuum‐drying at 60°C and air‐drying at room temperature by ultra high performance liquid chromatography coupled with pattern recognition approaches. In total 52 metabolites, down‐regulated or up‐regulated, were identified as potential chemical markers. Compared with fresh toad venom, vacuum‐drying at 60°C succeeded in raising the conjugated‐type bufadienolide content significantly, while the content of free‐type bufadienolides were slightly reduced. On the other hand, toad venom air‐dried at room temperature presented a relatively low amount of bufadienolides compared with fresh venom. For example, the content of several known anti‐tumor components (gamabufotalin, bufotalin, cinobufagin, etc.) were significantly reduced. The 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide bioassay further showed that venom air‐dried at room temperature had weaker anti‐tumor activity on human hepatocellular carcinoma SMMC‐7721 proliferation in vitro than samples vacuum‐dried at 60°C. These results showed that the great metabolomic changes of toad venom occurred during the drying process, suggesting that a proper drying procedure is important for sustaining the chemical quality of natural medicines.     

Fabrication of Thickness‐Controllable Micropatterned Polyelectrolyte‐Film/Nanoparticle Surfaces by Using the Plasma Oxidation Method

We have demonstrated a novel way to form thickness‐controllable polyelectrolyte‐film/nanoparticle patterns by using a plasma etching technique to form, first, a patterned self‐assembled monolayer surface, followed by layer‐by‐layer assembly of polyelectrolyte‐films/nanoparticles. Octadecyltrimethoxysilane (ODS) and (3‐aminopropyl)triethoxysilane (APTES) self‐assembled monolayers (SAMs) were used for polyelectrolyte‐film and nanoparticle patterning, respectively. The resolution of the proposed patterning method can easily reach approximately 2.5 μm. The height of the groove structure was tunable from approximately 2.5 to 150 nm. The suspended lipid membrane across the grooves was fabricated by incubating the patterned polyelectrolyte groove arrays in solutions of 1,2‐dioleoyl‐sn‐glycero‐3‐phosphocholine (DOPC) giant unilamellar vesicles (GUVs). The method demonstrated here reveals a new path to create patterned 2D or 3D structures.     

Superelastic,Macroporous Polystyrene‐Mediated Graphene Aerogels for Active Pressure Sensing

Three‐dimensional (3D) graphene‐based polymer/graphene aerogels with excellent mechanical properties are crucial for broad applications. The creation of such polymer/graphene aerogels remains challenging because of the poor dispersion and compatibility of polymer within the graphene matrix. By using the freezing‐directed assembly of graphene under the assistance of surfactant, 3D macroporous polystyrene/graphene aerogels (MPS‐GAs) with lightweight, superelastivity (80 % strain), high strength (80 kPa), and good electrical properties have been achieved in this study. The as‐prepared MPS‐GAs shows excellent electromechanical performance with stable cyclic resilient properties and sensitive resistance responses, thus making the MPS‐GAs promising candidates for applications in actuators, elastic conductors, strain/pressure sensors, and wearable devices.     

A pH-responsive activatable aptamer probe for targeted cancer imaging based on i-motif-driven conformation alteration

We present here a p H-responsive activatable aptamer probe for targeted cancer imaging based on i-motif-driven conformation alteration. This p H-responsive activatable aptamer probe is composed of two single-stranded DNA. One was used for target recognition, containing a central, target specific aptamer sequence at the 3′-end and an extension sequence at the 5′-end with 5-carboxytetramethylrhodamine(TAMRA) label(denoted as strand A). The other(strand I), being competent to work on the formation of i-motif structure, contained four stretches of the cytosine(C) rich domain and was labeled with a Black Hole Quencher 2(BHQ2) at the 3′-end. At neutral or slightly alkaline p H, strand I was hybridized to the extension sequence of strand A to form a double-stranded DNA probe, termed i-motif-based activatable aptamer probe(I-AAP). Because of proximityinduced energy transfer, the I-AAP was in a "signal off" state. The slightly acidic p H enforced the strand I to form an intramolecular i-motif and then initiated the dehybridization of I-AAP, leading to fluorescence readout in the target recognition. As a demonstration, AS1411 aptamer was used for MCF-7 cells imaging. It was displayed that the I-AAP could be carried out for target cancer cells imaging after being activated in slightly acidic environment. The applicability of I-AAP for tumor tissues imaging has been also investigated by using the isolated MCF-7 tumor tissues. These results implied the I-AAP strategy is promising as a novel approach for cancer imaging.     

Antifungal activity of some diaryl ethers

Several diaryl ethers were synthesized and tested in vitro against seven phytopathogenic fungi, namely Fusarium graminearum, Alternaria alternate, Helminthosporium sorokinianum, Pyricularia oryzae, Fusarium oxysporum f. sp. vasinfectum, Fusarium oxysporum f. sp. cucumarinum and Alternaria brassicae. Compared to a commercial agricultural fungicide, hymexazol, especially compounds a, b, e, g and k were found to be more effective at 50 mug/ml against F. graminearum, F. oxysporum f. sp. vasinfectum and F. oxysporum f. sp. cucumarinum. Meantime, some structure-activity relationships were also observed.     

Effect of operating conditions on the removal of Pb2+ by microporous titanosilicate ETS-10 in a fixed-bed column

The breakthrough behavior of Pb2+ in an ETS-10 fixed bed was experimentally examined at various operating conditions. Results showed that the adsorption amount of Pb2+ ions per unit mass of ETS-10 particles in a column is about 1.68 mmol/g under the experimental conditions. This amount was not markedly affected by the operating conditions because of the rapid adsorption rate of Pb2+ ions on ETS-10. In the presence of competitive metal ions, the amount of Pb2+ adsorbed on ETS-10 was slightly reduced. An overshoot of the effluent concentrations of competitive metal ions Cu2+ and Cd2+ was observed in the adsorption systems of binary and ternary solutions. This is ascribed to the replacement of pre-adsorbed Cu2+ and Cd2+ ions by Pb2+ ions. The ETS-10 column broken up by Pb2+ ions can be regenerated by using an EDTA-Na2 solution and the regenerated column can be reused.     

Single-wall carbon nanotube-containing cathode interfacial materials for high performance organic solar cells

Water/alcohol soluble cathode interfacial materials(CIMs)are playing important roles in optoelectronic devices such as organic light emitting diodes,perovskite solar cells and organic solar cells(OSCs).Herein,n-doped solution-processable single-wall carbon nanotubes(SWCNTs)-containing CIMs for OSCs are developed by dispersing SWCNTs to the typical CIMs perylene diimide(PDI)derivatives PDIN and PDINO.The Raman and X-ray photoelectron spectroscopy(XPS)measurement results illustrate the ndoped behavior of SWCNTs by PDIN/PDINO in the blend CIMs.The blended and n-doped SWCNTs can tune the work function and enhance the conductivity of the PDI-derivative/SWCNT(PDI-CNT)composite CIMs,and the composite CIMs can regulate and down-shift the work function of cathode,reduce the charge recombination,improve the charge extraction rate and enhance photovoltaic performance of the OSCs.High power conversion efficiency(PCE)of 17.1%and 17.7%are obtained for the OSCs based on PM6:Y6 and ternary PM6:Y6:PC₇₁ BM respectively with the PDI-CNTcomposites CIMs.These results indicate that the ndoped SWCNT-containing composites,like other n-doped nanomaterials such as zero dimensional fullerenes and two dimensional graphenes,are excellent CIMs for OSCs and could find potential applications in other optoelectronic devices.     

Microwave-Assisted Enzymatic Extraction of Flavonoids from Armeniaca mume Sieb. Blossom and Their Immunomodulating Effect in Mice with DSS-Induced Colitis

Armeniaca mume Sieb. blossom is among the traditional Chinese edible flowers, and it is widely used in the food and pharmaceutical industries. Flavonoids are among the most abundant bioactive compounds in A. mume Sieb. blossom. However, the research on the extraction of flavonoids from A. mume Sieb. blossom and their immunomodulating function is insufficient. In this study, we developed a microwave-assisted enzymatic extraction of flavonoids from A. mume Sieb. blossom (FAMB) and explored their immunomodulating effect on mice with dextran sulfate sodium salt-induced colitis. The results showed that the optimum parameters for microwave-assisted enzymatic extraction of FAMB were as follows: cellulase: 2.0%; microwave power: 200 W; microwave action time: 5 min; and enzymatic hydrolysis time: 50 min. FAMB significantly promoted the lymphocyte proliferation and natural killer (NK) cell killing activity in colitis mice, and increased the concentrations of TNF-α, IFN-γ, and IL-2 in serum. FAMB also significantly reduced the apoptosis of spleen lymphocytes in these mice. These results demonstrated that the microwave-assisted enzymatic method could significantly improve the yield and efficacy extraction of FAMB. FAMB showed a good immunomodulation effect on colitis mice.