Theoretical studies of mechanisms of cycloaddition reaction between difluoromethylene carbene and acetone

Mechanisms of the cycloaddition reaction between singlet difluoromethylene carbene and acetone have been investigated with the second‐order Møller–Plesset (MP2)/6‐31G* method, including geometry optimization and vibrational analysis. Energies for the involved stationary points on the potential energy surface (PES) are corrected by zero‐point energy (ZPE) and CCSD(T)/6‐31G* single‐point calculations. From the PES obtained with the CCSD(T)//MP2/6‐31G* method for the cycloaddition reaction between singlet difluoromethylene carbene and acetone, it can be predicted that path B of reactions 2 and 3 should be two competitive leading channels of the cycloaddition reaction between difluoromethylene carbene and acetone. The former consists of two steps: (i) the two reactants first form a four‐membered ring intermediate, INT2, which is a barrier‐free exothermic reaction of 97.8 kJ/mol; (ii) the intermediate INT2 isomerizes to a four‐membered product P_2b via a transition state TS2b with an energy barrier of 24.9 kJ/mol, which results from the methyl group transfer. The latter proceeds in three steps: (i) the two reactants first form an intermediate, INT1c, through a barrier‐free exothermic reaction of 199.4 kJ/mol; (ii) the intermediate INT1c further reacts with acetone to form a polycyclic intermediate, INT3, which is also a barrier‐free exothermic reaction of 27.4 kJ/mol; and (iii) INT3 isomerizes to a polycyclic product P₃ via a transition state TS3 with an energy barrier of 25.8 kJ/mol. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

羟基铝溶液及铝交联蒙脱土的研究

本文用(27)~Al NMR法和8-羟基喹啉萃取法分别研究了羟基铝溶液中十三聚铝含量的变化规律,还用X-射线衍射法研究了铝交联蒙脱土d_(001)的变化。研究结果表明,铝离子的聚合情况主要由羟铝比决定,而浓度影响不大。随着羟铝比的增加,溶液中单核铝离子含量减少,十三聚铝离子相对含量增加,所得铝交联蒙脱土的d_(001)也随之增大。参照这些变化规律、控制羟基铝溶液的组成,可以制备各种层柱状铝交联蒙脱土复合物。     

二碘化钐作用下缺电子烯烃的还原偶联反应

室温下SmI2-HMPA-t-BuOH-THF体系能顺利地将丁烯二酸二酯还原偶联为1, 2, 3, 4-四烷氧基羰基丁烷, 同样条件下, 亚苄基氰乙酸乙酯,α-乙氧羰基肉桂酸乙酯, α-乙酰基肉桂酸乙酯和亚苄基丙二酸亚异丙酯等化合物也发生还原偶联反应得到相应的二聚体。     

新型手性Salen双核锌配合物的分子识别研究

合成了新型手性Salen配体（H3L）及新型手性Salen双核锌配合物（主体）.通过研究主体对咪唑类客体及氨基酸酯类客体的分子识别行为,测定了这些配位反应的缔合常数.主体对咪唑类客体分子识别的缔合常数顺序为:K(Im) >K(2-MeIm) >K(2-Et-4-MeIm).主体对氨基酸酯类客体分子识别的缔合常数顺序为:K(LeuOCH3) >K(ValOCH3) >K(AlaOCH3) >K(SerOCH3),配位数均为2.主体与D、 L型氨基酸酯分子识别反应在不同温度下的缔合常数结果表明,随着温度的升高,对映选择性下降.实验发现反应体系中存在焓熵补偿关系. CD光谱的研究结果也反映了主体对不同客体识别能力的差异.     

不对称Salen-Mn(Ⅲ)配合物催化PNPP水解的动力学研究

用分光光度法研究了两种不对称Salen-Mn(Ⅲ)配合物催化α-吡啶甲酸对硝基苯酚酯(PNPP)的水解动力学.提出了相应的PNPP催化水解机理,讨论了底物浓度、体系的酸碱度、温度以及配合物结构对PNPP催化水解反应的影响.结果表明:此两种Schiff碱锰(Ⅲ)配合物在催化PNPP水解中均表现出较好的催化活性,PNPP水解速率随着底物浓度、体系pH值的增大而增大;在15～55℃温度范围内,未观察到催化剂失活现象;其中,带有苯并氮杂-15-冠-5侧基的不对称Salen-Mn(Ⅲ)配合物比带有吗啉基的另一配合物拥有更高的催化活性,这可能主要由这两种模拟水解酶之间较大的疏水微环境差异所引起.     

Selenium Nanoparticles Prepared from Reverse Microemulsion Process

Selenium nanoparticles were prepared by a reverse microemulsion system. Sodium selenosulfate was used as selenium source. The results showed that hydrochloric acid concentration and reaction temperature had great influence on the morphology of products. The crystalline selenium nanowires and amorphous selenium nanorods were obtained in given condition.     

PU大分子单体水溶液性质

双亲聚合物一般由亲水和亲油 2种链段构成 ,有嵌段型[1,2 ] 和接枝型[3 ] 2种 ,其中通过大分子单体法合成双亲接枝聚合物备受关注[4] 。如以亲水性大分子单体和亲油性小分子单体共聚 ,大分子单体构成共聚物主链上支链 ,具有较大活动性 ,亲水效能高。采用对氯甲基苯乙烯[5] 或甲基丙烯酰氯[6] 与聚氧化乙烯大分子的一端相反应 ,可得到亲水性大分子单体 ,但其分子量及结构变化有限。本文采用常规条件 ,合成了嵌段式水溶性聚氨酯大分子单体 ,其分子量较大 ,共聚接枝的支链较长。利用该大分子单体具有非离子高分子表面活性剂的性质 ,采用无皂乳…     

Recycling Chiral Organocatalyst （4S）-Phenoxy-（S）-proline for Direct Asymmetric Aldol Reaction in Ionic Liquid （bmim）PF6

Room temperature ionic liquid (bmim)PF6 was evaluated for recycling an organocatalyst (4S)-phenoxy-(S)-proline for direct asymmetric aldol reactions. The desired aldol products were obtained with good yields up to 93.2% and enantioselectivities up to 88.5%, and isolation of the products by simple extraction allowed recycling the ionic liquid containing the immobilized catalyst in subsequent reactions without significant decrease of yields and enantioselectivities.     

Identification and screening of active components from Ziziphora clinopodioides Lam. in regulating autophagy

This study investigated the flavonoid constituents of a traditional Chinese medical plant Ziziphora clinopodioides Lam. by using ultra-performance liquid chromatography coupled with quadruple time-of-flight mass spectrometry and screened the active components in regulating autophagy.Normal rat kidney (NRK) cells transfected with green fluorescent protein- microtubule-associated protein 1 light Chain 3(GFP-LC3) were treated with Z. clinopodioides flavonoids and its chemical compositions. After 4 h of treatment, the auto-phagy spot aggregation in NRK cells was photographed and observed by laser scanning confocal microscopy. The following 10 flavonoid components of Z. clinopodioides were identified: baicalein(1), quercetin(2), hyperoside(3), quercetin3-O-β-d-glucopyranoside(4), apigenin(5), kaempferol(6), chrysin(7), diosimin(8), linarin(9) and rutin(10). Among these flavonoids, chrysin, apigenin and quercetin were identified as the active principles in activating autophagy. This research may provide a reference for further developing and utilizing Z. clinopodioides.     

Biradicals/zwitterions from thermolysis of enyne-isocyanates. Application to the synthesis of 2(1H)-pyridones, benzofuro[3,2-c]pyridin-1(2H)-ones, 2,5-dihydro-1H-pyrido[4,3-b]indol-1-ones, and related compounds

Thermolysis of benzannulated enyne-isocyanates 13 and enyne-isocyanates 36 and 37 promoted the cycloaromatization reactions to generate in situ O,4-didehydro-2-hydroxyquinolines and O,4-didehydro-2-hydroxypyridines, respectively, as reactive intermediates. These cycloaromatized intermediates could be captured either as biradicals and/or as zwitterions depending on the nature of the substituent at the alkynyl terminus. The intermediate derived from cycloaromatization of 13a bearing a phenyl substituent could be regarded as biradical 14, which then abstracts hydrogen atoms from gamma-terpinene leading to 2(1H)-quinolinone 15. Alternatively, the same intermediate could also be regarded as zwitterion 14', which then undergoes an initial hydride abstraction from gamma-terpinene followed by protonation to produce 15. The presence of a 2-phenylethyl substituent in 13b and 37a or a 2-methylphenyl substituent in 37b also allowed the resulting intermediates to be captured intramolecularly either as biradicals or as zwitterions, producing 2(1H)-quinolinone 19, 2(1H)-pyridone 39, and benzopyranopyridine 43, respectively. On the other hand, with a 2-methoxyphenyl, a 2-(dimethylamino)phenyl, or a 3-methoxypropyl substituent, the chemical behavior of the cycloaromatized adduct could be best accounted for in terms of a zwitterionic intermediate leading to benzofuro[3,2-c]quinolin-6(5H)-one (20), 5,11-dihydro-11-methyl-6H-indolo[3,2-c]quinolin-6-one (25), benzofuro[3,2-c]pyridin-1(2H)-one 44, 2,5-dihydro-2,5-dimethyl-1H-pyrido[4,3-b]indol-1-one 46, and related compounds. Interestingly, thermolysis of 37f bearing a 2-(methoxymethyl)phenyl substituent at the alkynyl terminus produced the unexpected benzopyranopyridine 56 as the major product in a process involving the cleavage of the bond between the methoxyl oxygen and the adjacent methylene carbon. The efficiency and selectivity of the cycloaromatization reaction could also be enhanced by the introduction of 1.1 to 10 equiv of dimethylphenylsilyl chloride to the reaction mixture to capture the resulting zwitterion.