Polyepoxysuccinic acid with hyper-branched structure as an environmentally friendly scale inhibitor and its scale inhibition mechanism

In order to improve the scale inhibition efficiency of existing polyepoxysuccinic acid (PESA) and to study the impact of their molecular structure on scale inhibition efficiency, a series of PESA with linear and hyper-branched structure have been designed and synthesized through co-polymerization reaction with glycidyl and epoxy succinate. The scale inhibition behavior of PESA with linear and hyper-branched structure against CaCO₃ and CaSO₄ scales was evaluated using static scale inhibition method, and their ability to retard deposition of CaCO₃ was also examined. The experimental results showed that, for CaCO₃ and CaSO₄, the PESA with hyper-branched structure provides a scale inhibiting efficiency as high as 95.9% and 94.3%, respectively, at an inhibitor concentration of 15?mg/L. In addition, the processes of crystal nucleation, growth and crystal morphology have been analyzed. The experimental results show that the PESA with hyper-branched structure not only prolongs the induction period of CaCO₃ crystal nucleation, but also reduces the number of crystal nuclei and changes the size and morphology of the CaCO₃ crystal. Moreover, the FTIR, SEM and XRD analyses showed that the PESA with hyper-branched structure can induce the irregularity of growing CaCO₃ crystal, destroy the formation of crystals and change the polymorphs of calcium scale crystal. This conclusion indicates that the prepared PESA with hyper-branched structure has great potential for applying in the treatment of industrial water.     

Dispersive liquid–liquid microextraction combined with online preconcentration MEKC for the determination of some phenoxyacetic acids in drinking water

A fast and simple technique composed of dispersive liquid–liquid microextraction (DLLME) and online preconcentration MEKC with diode array detection was developed for the determination of four phenoxyacetic acids, 2,4,5‐trichlorophenoxyacetic acid, 2,4‐dichlorophenoxyacetic acid, 2,6‐dichlorophenoxyacetic acid, and 4‐chlorophenoxyacetic acid, in drinking water. The four phenoxyacetic acids were separated in reversed‐migration MEKC to the baseline. About 145‐fold increases in detection sensitivity were observed with online concentration strategy, compared with standard hydrodynamic injection (5 s at 25 mbar pressure). LODs ranged from 0.002 to 0.005 mg/L using only the online preconcentration procedures without any offline concentration of the extract. A DLLME procedure was used in combination with the proposed online preconcentration strategies, which achieved the determination of analytes at limits of quantification ranging from 0.2 to 0.5 μg/kg, which is far lower than the maximum residue limits established by China. The satisfactory recoveries obtained by DLMME spiked at two levels ranged from 67.2 to 99.4% with RSD <15%, making this proposed method suitable for the determination of phenoxyacetic acids in water samples.     

Amperometric nonenzymatic determination of glucose based on a glassy carbon electrode modified with nickel(II) oxides and graphene

We have developed a stable and sensitive nonenzymatic glucose sensor by modifying a glassy carbon electrode (GCE) with a composite incorporating nickel(II) oxides and reduced graphene. The oxides were generated by directly electrodepositing nickel on the GCE with a graphene modifier using a multi-potential pulse process, and then oxidizing nickel to nickel(II) oxides by potential cycling. In comparison to the conventional nickel(II) oxides-modified GCE, this new nickel(II) oxides-graphene modified GCE (NiO-GR/GCE) has an about 1.5 times larger current response toward the nonenzymatic oxidation of glucose in alkaline media. The response to glucose is linear in the 20 μM to 4.5 mM concentration range. The limit of detection is 5 μM (at a S/N of 3), and the response time is very short (<3 s). Other beneficial features include selectivity, reproducibility and stability. A comparison was performed on the determination of glucose in commercial red wines by high-performance liquid chromatography (HPLC) and revealed the promising aspects of this sensor with respect to the determination of glucose in real samples.

微波消解-浊点萃取-火焰原子吸收光谱法测定空心胶囊中铬含量

研究了微波消解-浊点萃取-火焰原子吸收光谱法(FAAS)测定空心胶囊中痕量铬的方法。空心胶囊通过微波消解,以二乙基二硫代氨基甲酸钠(DDTC)为络合剂络合消解液中铬(Ⅵ),非离子表面活性剂Triton X-114为萃取剂,结合FAAS测定空心胶囊中痕量铬,与《中国药典》(2010版)检测方法具有较好一致性。考察了溶液的pH值、络合剂和表面活性剂浓度、平衡温度和时间等条件对浊点萃取效果的影响。在最优条件下,铬(Ⅵ)线性范围为0～10μg/mL,检出限(3σ)为7.6ng/mL,相对标准偏差为1.5%(n=10),回收率在95%～102%之间。方法灵敏度高,重复性好,适合于胶囊中铬的日常检测。     

镥晶体的绝热量热法测试和热力学函数

文章合成了Lu(NO₃)₃(C₂H₅O₂N)_4.H₂O,用红外和元素分析对其进行了表征。用高精度全自动绝热量热仪,测定了该配合物80-382 K温区的热容, 利用实验热容数据, 根据热容与焓、熵的热力学关系, 求出了配合物85-350 K温区内每隔5 K相对于298.15K的标准热力学函数(HT - H298.15)m和(ST - S298.15)m.在80-350 K温度区间内,配合物的热容随温度升高而增大,没有相转移点和热力学吸收峰的出现,该配合物在此温度区间内是稳定存在的。     

含氟苯硼酸的合成及应用研究进展

含氟苯硼酸是一种重要的有机合成中间体, 在有机合成中应用相当广泛. 综述了近年来含氟苯硼酸的合成及应用方面的重要研究进展.     

Synthesis and Photocatalytic Property of ZnO/TiO2 Inverse Opals Films with Controllable Composition and Topology

A novel method to fabricate composition- and topology-controlled ZnO/TiO₂ inverse opals (IO) films using a positive sacrificial ZnO IO template has been developed. This method includes a two-step process, preparation of ZnO IO by a simple electrochemical deposition using a self-assembly polystyrene colloidal crystal template and preparation of ZnO/TiO₂ IO by a liquid phase deposition (LPD) process at room temperature. The composition and topology of ZnO/TiO₂ IO can be easily controlled by changing the duration of the LPD. After 20 min LPD process, a ZnO/TiO2 composite IO with non-close-packed face-centered cubic air sphere array was obtained. Prolonging the duration to 60 min, a pure TiO₂ IO (TIO-LPD60) with obviously thickened walls was formed. The formation mechanism for the compositional and topological variation was discussed. A preliminary study on UV photocatalytic property of the samples for degradation of methylene blue reveals that the composition and topology significantly influenced the photocatalytic activity of the IO film. The ZnO/TiO₂ composite IO demonstrates a higher degree of activity than both pure ZnO and pure TiO₂ IO, although they have a similar IO wall thickness. Moreover, with increasing IO wall thickness from ～52 nm to ～90 nm, TIO-LPD60 exhibits the highest level of photocatalytic performance.     

Mesoporous TiO2/SiO2 composite nanofibers with selective photocatalytic properties

Mesoporous TiO2/SiO2 composite nanofibers with a diameter of 100-200 nm and silica shell thickness of 5-50 nm have been fabricated by a sol-gel combined two-capillary co-electrospinning method; the composite nanofibers exhibited selective photocatalytic activity based on the decomposition of Methylene Blue, Active Yellow and Disperse Red.     

双马来酰亚胺增韧研究Ⅱ.链扩展双马来酰亚胺及其树脂的合成及表征

合成了一系列结构不同和链长短不一的双马来酰亚胺，并对其结构和性能作了表征，同时研究了它们的固化反应和固化产物的性能。用双马来酰亚胺和二烯丙基化合物反应制造了增韧树脂，研究了该树脂的固化和热稳定性。