2,2'-对苯二甲硫基二乙酸与醋酸钴在低热温度下的固-固相反应

２，２－对苯二甲硫基二乙酸与醋酸钴在低热温度下的固－固相反应张卫华＊忻新泉（湖北师范学院化学系黄石４３５００２）（南京大学配位化学国家重点实验室南京）关键词２，２－对苯二甲硫基二乙酸，醋酸钴，固－固相反应，动力学１９９６－０８－０４收稿，１９９７...     

扫描近场光学显微镜对纳米结构的观察

光学显微镜在人们认识微观世界的过程中一直扮演着非常重要的角色．随着认识的深入，对空间分辨率的要求也越来越高．但是众所周知，普通光学显微镜（远场情况下）的分辨率受光的衍射效应所限制，一般可表达为0．61A／N．A．（约等于A／2，A为照射光的波长，N．A．为数值孔径）     

SAPO-34分子筛骨架稳定性的研究

利用差热分析，原位ＸＲＤ技术，高温条件下的焙烧和水蒸气处理并关联其催化性能变化，研究了ＳＡＰＯ－３４分子筛的热及水热稳定性，差热分析结果表明，ＳＡＰＯ－３４的骨架破坏温度高于１３００Ｋ，原位ＸＲＤ跟踪研究证实，ＳＡＰＯ－３４分子筛原粉在高温焙烧以除掉有机胺及随后的降温过程中无明显的骨架破坏；而焙烧型ＳＡＰＯ－３４在空气中放置一定时间后，水分子吸附微孔中明业降低样品的ＸＲＤ峰强度，且降低幅度随放置时     

CrO3.CH3NH2.HCl／Al2O3的制备及其对苯偶姻体系的氧化反应

ＣｒＯ３·ＣＨ３ＮＨ２·ＨＣｌ／Ａｌ２Ｏ３的制备及其对苯偶姻体系的氧化反应张贵生＊石启增陈密峰蔡昆（河南师范大学化学系新乡４５３００２）关键词ＣｒＯ３·ＣＨ３ＮＨ２·ＨＣｌ／Ａｌ２Ｏ３，苯偶姻，苯偶酰，氧化１９９６－０８－１８收稿，１９９６－１１－０...     

胶束介质在动力学分析中的应用

评述了胶束介质在动力学分析测定中的作用和应用状况，讨论了胶束催化的动力学特征，胶束对反应物理化学性质的修饰及其在动力学多组份测定和酶催化动力学分析中的应用。     

Prediction of interaction between small molecule and enzyme using AdaBoost

The knowledge of whether one enzyme can interact with a small molecule is essential for understanding the molecular and cellular functions of organisms. In this paper, we introduce a classifier to predict the small molecule– enzyme interaction, i.e., whether they can interact with each other. Small molecules are represented by their chemical functional groups, and enzymes are represented by their biochemical and physicochemical properties, resulting in a total of 160 features. These features are input into the AdaBoost classifier, which is known to have good generalization ability to predict interaction. As a result, the overall prediction accuracy, tested by tenfold cross-validation and independent sets, is 81.76% and 83.35%, respectively, suggesting that this strategy is effective. In this research, we typically choose interactions between small molecules and enzymes involved in metabolism to ultimately improve further understanding of metabolic pathways. An online predictor developed by this research is available at . Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Properties of HfO2 thin films prepared by dual-ion-beam reactive sputtering

HfO₂ thin films were prepared in dual-ion-beam reactive sputtering (DIBRS) method. Spectrophotometer, surface thermal lensing (STL) technique, Rutherford backscattering (RBS), and X-ray diffraction (XRD) were employed in measuring the transmittance, absorptance, stoichiometry, and microstructure, respectively. Experimental results indicate that the peak transmittance value of the sample is about 90%. Weak absorptance measurement for 1064 nm wavelength laser by STL technique investigated that the absorption is 180 ppm for as-grown sample, which is larger than expected. Substoichiometry is the main cause for larger absorptance, which could be proved by RBS and annealing test results. XRD result shows that the films are polycrystalline, and the monoclinic is the dominant phase.     

X-ray spectra induced by slow highly charged Ar q + ions in collision with Nb surface

The X-ray spectra of Nb surface induced by Ar ^q+ (q = 16,17) ions with the energy range from 10 to 20 keV/q were studied by the optical spectrum technology. The experimental results indicate that the multi-electron excitation occurred as a highly charged Ar¹⁶⁺ ion was neutralized below the metal surface. The K shell electron of Ar¹⁶⁺ was excited and then de-excited cascadly to emit K X-ray. The intensity of the X-ray emitted from K shell of the hollow Ar atom decreased with the increase of projectile kinetic energy. The intensity of the X-ray emitted from L shell of the target atom Nb increased with the increase of projectile kinetic energy. The X-ray yield of Ar¹⁷⁺ is three magnitude orders larger than that of Ar¹⁶⁺. Supported by the National Natural Science Foundation of China (Grant Nos.10774149 and 10405025)     

An improved protocol for the preparation of 3-pyridyl- and some arylboronic acids

3-Pyridylboronic acid was prepared in high yield and bulk quantity from 3-bromopyridine via a protocol of lithium-halogen exchange and "in situ quench". This technique was further studied and evaluated on other aryl halides in the preparation of arylboronic acids.     

Observation of columnar microstructure in step-graded Si1-xGex/Si films using high-resolution X-ray microdiffraction

Columnar microstructure in step-graded Si(1-x)Ge(x)/Si(001) structures with low threading dislocation densities has been determined using high angular resolution (approximately 0.005 degrees ) x-ray microdiffraction. X-ray rocking curves of a 3-microm-thick strain-relaxed Si(0.83)Ge(0.17) film show many sharp peaks and can be simulated with a model having a set of Gaussians having narrow angular widths (0.013 degrees -0.02 degrees ) and local ranges of tilt angles varying from 0.05 degrees to 0.2 degrees. These peaks correspond to individual tilted rectangular columnar micrograins having similar (001) lattice spacings and average areas of 0.8 to 2.0 microm(2).