Search for exclusive multibody non- decays at the resonance

Using data collected at the psi(3770) resonance with the CLEO-c detector at the Cornell e+e- storage ring, we present searches for 25 charmless decay modes of the psi(3770), mostly multibody final states. No evidence for charmless decays is found.     

Influence of potential function asymmetries on the performance of nonlinear energy harvesters under white noise

To improve the broadband transduction capabilities of vibratory energy harvesters (VEHs) under random and non-stationary excitations, many researchers have resorted to purposefully introducing nonlinearities into the restoring force of the harvester. While performing this task, it is often very challenging to maintain a perfectly symmetric restoring force which yields a VEH with an asymmetric potential energy function. This paper investigates the influence of potential function asymmetries on the performance of nonlinear VEHs under white noise inputs. To that end, a quadratic nonlinearity is introduced into the restoring force and its influence on the mean output power of the harvester for mono- and bi-stable quartic potentials is investigated. It is shown that, for VEHs with a mono-stable quartic potential function, the mean output power increases with the degree of potential function asymmetry. On the other hand, for energy harvesters with a bi-stable quartic potential function, asymmetries in the restoring force appear to worsen performance especially for low to moderate noise intensities. When the noise intensity becomes sufficiently large, the influence of the potential function?s asymmetry on the mean power diminishes. Results also reveal that a VEH with a symmetric bi-stable quartic potential function produces higher mean power levels than the one with the most asymmetric mono-stable potential. As such, it is concluded that a VEH with a symmetric bi-stable potential is most desirable to improve performance under white noise.     

Parameter determination from current–voltage characteristics of HgCdTe photodiodes in forward bias region

Current–voltage characteristics of HgCdTe photodiodes in the forward bias region have been modeled considering mechanisms including drift-diffusion current, recombination current, metal-semiconductor contact and constant series resistance. Moreover, a fitting method based on the genetic algorithm has been developed to obtain values of related physical parameters from the measured dynamic resistance–voltage curves. Fitting results of $n^+$ -on- $p$ planar devices with different cutoff wavelengths are presented to illustrate the model and method, which are available and promising in acquiring device parameter values and evaluating the electrode contact quality.     

Study of multi-nucleon transfer reactions in 58, 64Ni + 207Pb collisions at the velocity filter SHIP

The European Physical Journal A - We investigated multi-nucleon transfer reactions in collisions of 58Ni + 207Pb and 64Ni + 207Pb at Coulomb barrier energies. The new aspect is that we used a...     

Photoinduced charge injection in the metal/organic interface studied by transient photovoltage measurements with bias

Transient photovoltage of ITO/organic/Al cells is studied under different bias polarities and voltages.It is found that for an ITO/NPB/Al cell,light incidence on the Al side induces more bias-dependent transient photovoltage variation when the photovoltage is positive than when it is negative.However,for an ITO/C60 /Al cell,the variation characteristics of transient photovoltage is reversed.These results support the previously proposed mechanism that Al could inject charges into the organic layer upon photon excitation,indicating that the absorption of electrode can also contribute to photovoltaic effect.     

Generation of high power laser at 1314 nm from a diode-side-pumped Nd:YLF module

We demonstrate a high power continuous-wave （CW） and acoustic-optically （AO） Q-switched 1314-nm laser with a diode-side-pumped Nd：YLF module. A maximum CW output power of 21.6 W is obtained with a diode pump power of 180 W, corresponding to an optical-to-optical conversion efficiency of 12.0% and a slope efficiency of 16.1%. In the Q-switching operation, a highest pulse energy of 3.8 mJ is obtained at a pulse repetition rate of 1 kHz. The shortest pulse width and maximum single peak power are 101.9 ns and 37.3 kW, respectively.     

Label-free high-throughput and real-time detections of protein interactions by oblique-incidence reflectivity difference method

Selected Mouse IgG of 1 mg/mL as target was fabricated on microarray for 500 sample dots.Label-free and real-time reaction dynamic processes were detected between the microarrays with Goat Anti-mouse IgG of 0.02 mg/mL using the obliqueincidence reflectivity difference(OIRD)method.We obtained the reaction results and the reaction dynamic curves of 500 protein dots.In addition,we also used label-free detection of protein microarrays of 10080 sample dots,including BSA and different concentrations of Mouse IgG and Rabbit IgG,by OIRD.The obtained reaction results between the protein microarray with 1 mg/mL Goat Anti-mouse IgG and 1 mg/mL Goat Anti-rabbit IgG are reported herein.Experimental results show that OIRD can be not only label-free high-throughput detection method for biological microarrays but also label-free real-time detection in the interaction processes of biomolecules.     

Experiments and analysis of thin tungsten slice and W/Cu brazing for primary collimator scraper in CSNS/RCS

According to the requirements for the beam collimation system of the rapid cycling synchrotron(RCS)of China Spallation Neutron Source(CSNS),the main structure of a scraper of primary collimator is made by W/Cu brazing,in which the thickness of tungsten slice is 0.17 mm.In order to get the best mechanical properties,the brazing temperature is suggested to be controlled under the recrystallization temperature of tungsten,while the recrystallization temperature is affected directly by the thickness of tungsten.Because of little research and application on the brazing of thin tungsten slice of 0.17 mm and copper,tensile tests are done to get the mechanical properties of tungsten slices which experience different brazing temperatures.In keeping the inner relationships between the mechanical properties and temperature,another experiment is done by using SEM to scan the microstructures including the size and distribution of crystals.Finally we determine the recrystallization temperature of tungsten slice of 0.17 mm,and get the best parameters of W/Cu brazing for scrapers of primary collimator in CSNS/RCS.     

模拟回火马尔可夫链蒙特卡罗全波形分析方法

针对传统的全波形分析方法不能快速自动处理全波形数据的缺点,提出了一种模拟回火马尔可夫链蒙特卡罗全波形分析法,用于求解全波形数据中的波峰数和峰值位置等参量.该方法采用Metropolis更新策略求解波峰数量和噪声两个参量,以达到快速求解的目的;而峰值位置和波峰幅值则采用改进的模拟回火策略求解,通过添加的主动干预回火步骤实现对参量更新过程的有效探测,以满足对速度或运算收敛性的要求.模拟回火马尔可夫链蒙特卡罗全波形分析方法以马尔可夫算法为基础,仍保持马氏链的收敛性,从而保证本方法具有良好的鲁棒性,实现对全波形数据的自动化处理.     

厚二氧化硅光波导薄膜制备及其特性分析

以硅烷和氧化二氮作为反应气体，采用等离子体增强化学气相沉积(PECVD)技术，不使用掺杂，在单晶硅衬底上制备了用于平面光波导的二氧化硅薄膜。研究了薄膜折射率和淀积速率与工艺参量之间的关系，通过棱镜耦合仪、傅里叶变换红外光谱、原子力显微镜等测试手段，分析了薄膜的结构和光学特性。结果表明，实验能快速生长厚二氧化硅薄膜，薄膜表面平整，颗粒度均匀，同时薄膜具有折射率精确可控和红外透射性能好的特点，非常适合制作光波导器件。