Preparation of dye-loaded SiO2 nanoparticles

A room temperature method for the encapsulation of pyrene in SiO₂ nanoparticles is described. The relation between alkoxysilane surfactant chain length, reactant molar ratios and the uptake of dye, sample morphology, photophysical properties, and the ability of the silicate matrix to protect the encapsulated dye was examined. The synthesis can easily be adapted for the encapsulation of other hydrophobic and thermolabile substances, and used in the development of nanostructured optically active coatings, films and monoliths.     

CoNiZ系列合金的结构和马氏体相变性质

利用X射线衍射研究了CoNiZ(Z=Si,Sb,Sn,Ga等)合金在不同热处理条件下的相组成.当Z元素为Sn,Sb时,材料是完全的B2结构;但Z为Si时,材料变成面心立方的γ相.形成B2还是γ相由电子浓度和原子尺寸效应两种因素共同决定.而CoNiGa的研究结果表明,在合金中除了形成B2结构的同时还容易形成γ相,常表现出两相共存的特性.对材料进行不同方式的热处理可以使合金中两相的含量有所消长,γ相含量的多少对CoNiGa合金的马氏体相变有很大的影响.分析指出,两相共存及其所带来的物性变化是CoNiGa铁磁性形状记忆合金非常有利用价值的物理性质.     

La1-xPrxMnO3(x=0.1,0.2)薄膜庞磁电阻性质的研究

一种新的庞磁电阻氧化物薄膜La1-xPrxMnO3(x=0.1,0.2)薄膜用脉冲激光沉积(PLD)方法生长在(100)SrTiO3单晶基底上.XRD结果显示薄膜具有很好的外延单晶取向.电输运和磁性质的研究表明薄膜具有显著的庞磁电阻效应(CMR)效应,其中磁电阻比率达95%(在5T的磁场下).X射线光电子能谱(XPS)的结果表明薄膜体系中Pr离子的价态为+4价,因此该薄膜很可能是电子掺杂的庞磁电阻体系.     

Pd (II)‐catalyzed vinyl addition polymerization of novel functionalized norbornene bearing dimethyl carboxylate groups

Three novel functionalized polynorbornenes (PNB) with pendant dimethyl carboxylate group (carboxylates—acetate, propionate, and butyrate) are synthesized as a vinyl‐type with a palladium (II) catalyst in high yield. The effects of size of substitutents, molar ratio of monomer to catalyst, solvent polarity, reaction time, and temperature on the polymerization of exo‐norbornene dimethyl propionate were systematically investigated. The low molar ratio and temperature, as well as high polarity of solvent, and long reaction time, are favorable for the enhancement of the monomer conversion, especially, the solvent have an obvious effect on the catalyst activity. The resulting poly(cis‐norbornene‐exo‐2,3‐dimethyl carboxylates) (PNB‐dimethyl carboxylates) show good solubility in common organic solvent and high thermal stability up to 360 °C. The glass transition temperature was detected by DMA at 331, 324, and 318 °C for acetate, propionate, and butyrate, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3391–3399, 2007     

Nondegeneracy and uniqueness of positive solutions for Robin problem of second order ordinary differential equations and its applications

This article studies positive solutions of Robin problem for semi-linear second order ordinary differential equations. Nondegeneracy and uniqueness results are proven for homogeneous differential equations. Necessary and sufficient conditions for the existence of one or two positive solutions for inhomogeneous differential equations or differential equations with concave-convex nonlinearities are obtained by making use of the nondegeneracy and uniqueness results for positive solutions of homogeneous differential equations.     

激光二极管泵浦的高重复频率Nd：YAG激光器

报道两个１．５Ｗ连续激光二极管端面泵浦的声光调ＱＮｄ：ＹＡＧ激光器，输出激光脉冲的最高重复频率为３０ｋＨｚ重复频率１ｋＨｚ时，最窄脉宽为１２ｎｓ，最高峰值功率为１２．１ｋＷ。     

MnBiDy(Sm)永磁膜的结构和磁性

报道了采用真空蒸镀的方法制备的MnBiDy(Sm)永磁膜的结构和磁性.Mn:Bi:Dy(Sm)的投料比为2:1:0.10.薄膜经过退出处理(350—425℃,保温4h)后,具有NiAs型hcp结构,C轴垂直膜面,剩余磁感应强度B=3.4-6.5kG,内禀矫顽力_MH_c≈3-8kOe,最大磁能积(BH)_(max)=13.39MG·Oe.实验发现,薄膜厚度对MnBiDy(Sm)永磁膜的结构和磁性具有很大的影响. 关键词：     

A quasi double-grating grazing incidence pulsed dye laser

Continuous scanning of a 1 GHz pulsed laser line using only one 5-cm grating as an intracavity selective element is obtained from a pulsed dye laser pumped by a Nd: YAG (8 ns-532 nm) laser. Such a single-grating dye laser operates in the same way as a real double-grating grazing incidence laser and provides an appreciable improvement of the resolution (enhancement factor 2), compared with previous grazing incidence ones. The superiority of this laser cavity has been proved for single-longitudinal-mode operation.Laboratoire associé à l'Université de Paris-Sud     

Covalent attachment of phospholipid analogous polymers to modify a polymeric membrane surface: a novel approach

A novel method for the surface modification of a microporous polypropylene membrane by tethering phospholipid analogous polymers (PAPs) is given, which includes the photoinduced graft polymerization of N,N-dimethylaminoethyl methacrylate (DMAEMA) and the ring-opening reaction of grafted poly-(DMAEMA) with 2-alkyloxy-2-oxo-1,3,2-dioxaphospholanes. Five 2-alkyloxy-2-oxo-1,3,2-dioxaphospholanes, containing octyloxy, dodecyloxy, tetradecyloxy, hexadecyloxy, and octadecyloxy groups in the molecular structure, were used to fabricate the PAP-modified polypropylene membranes. The attenuated total reflectance FT-IR spectra of the original, poly(DMAEMA)-grafted, and PAP-modified membranes confirmed the chemical changes on the membrane surface. Scanning electron microscope pictures showed that, compared with the original membrane, the surface porosities ofpoly(DMAEMA)-grafted and PAP-modified membranes were somewhat reduced. Water contact angles measured by the sessile drop method on PAP-modified membranes were slightly lower than that on the original polypropylene membrane, but higher than those on poly(DMAEMA)-grafted membranes with the exception of octyloxy-containing PAP-modified membranes. However, BSA adsorption experiments indicated that the five PAP-modified membranes had a much better protein-resistant property than the original polypropylene membrane and the poly(DMAEMA)-grafted membranes. For hexadecyloxy- and octadecyloxy-containing PAP-modified membranes, almost no protein adsorption was observed when the grafting degree was above 6 wt %. It was also found that the platelet adhesion was remarkably suppressed on the PAP-modified membranes. All these results demonstrate that the described approach is an effective way to improve the surface biocompatibility for polymeric membranes.