基于车载通信标准街道场景的电磁散射信道模型

针对室外无线信道视距(line of sight,LOS)/非视距(non-line of sight,NLOS)传输环境下的车到车(vehicular-to-vehicular,V2V)通信系统,本文提出了一种基于标准街道散射的统计信道模型,其移动发射机(mobile transmitter,MT)与移动接收机(mobile receiver,MR)处于运动状态,街道两旁分布的散射体固定.由几何模型出发又引入了一种随机的参考信道模型,其散射体有无穷多个,均以平行于街道两侧的散射条纹形式均匀分布在三维(three dimensional,3D)空间的一个二维(two dimensional,2D)矩形内部.在室外街道通信环境下,模型推导了散射信道中发射角(angle of departure,AOD)以及到达角(angle of arrival,AOA)的概率密度函数(probability density functions,PDFs)解析式;研究了多普勒功率谱密度(power spectral density,PSD)及其时间自相关函数(autocorrelation function,ACF);分析了模型多普勒参数以及街道散射体等因素对V2V通信系统性能的影响.与城市、农村的测量信道对比分析,表明本模型仿真的统计特性符合理论与实际,拓宽了室外V2V无线通信信道建模的研究.为评估室外V2V通信系统的传输特性、仿真无线通信系统提供了有力的研究工具.     

正弦平方势与正电子面沟道辐射的一般特征

引入正弦平方势，在经典力学框架内，将面沟道粒子的运动方程化为标准的摆方程，并用Jacobian椭圆函数和椭圆积分解析地给出系统的解和粒子运动周期，导出了正电子面沟道辐射的瞬时辐射强度、平均辐射强度和辐射谱特征.结果表明，沟道辐射频率己进入γ-能区，并指出了利用它作为短波长激光的可能性. 关键词： 沟道辐射 非线性 正弦平方势     

Geometries, stabilities, and electronic properties of Be-doped gold clusters: a density functional theory study

We have systematically investigated the geometrical structures, relative stabilities and electronic properties of small bimetallic AunBe (n = 1, 2, . . . , 8) clusters using a density functional method at BP86 level. The optimized geometries reveal that the impurity beryllium atom dramatically affects the structures of the Aun clusters. The averaged binding energies, fragmentation energies, second-order difference of energies, the highest occupied-lowest unoccupied molecular orbital energy gaps and chemical hardness are investigated. All of them exhibit a pronounced odd-even alternation, manifesting that the clusters with even number of gold atoms possess relatively higher stabilities. Especially, the linear Au2Be cluster is magic cluster with the most stable chemical stability. According to the natural population analysis, it is found that charge-transferring direction between Au atom and Be atom changes at the size of n = 4.     

Formation mechanism of ethanol-water excimer

The fluorescent spectrum and the excitation spectrum were used to present the cluster molecular structure feature in ethanol-water solutions.Through analyzing the fluorescent characteristics of an excimer,it is proposed that the excimers are formed between the ethanol-water cluster molecules in the excited state and in the ground state.The fluorescent lifetime and the fluorescent intensity decay process give information about the photo-physical and photo-chemical processes of the formation and the dissociation of an excimer.The theoretical calculation and physical analysis coincide with the experimental results.The preliminary conclusion about the structure feature of ethanol-water cluster molecule is that it has a planar one like a sandwich.     

基于元胞自动机的对向行人交通流仿真研究

基于元胞自动机对对向行人交通流进行仿真研究. 模型利用四个动态参数反映行人移动区域和其视野范围内的实际情况,从而决定行人的行为选择,行人可以根据自身周围的情况选择前进、后退、等待、左右移动、交换位置等行为. 仿真研究不同方向比例与不同系统规模的对向行人流的速度-密度、流量-密度关系. 研究结果表明,系统存在相位转换和临界密度,方向比例和系统规模对行人流的速度-密度、流量-密度关系曲线的形状和系统临界密度值有一定的影响. 关键词： 元胞自动机 对向行人流 动态参数 临界密度     

The optimum configuration for the third-harmonic generation of 1.064 μm in a YCOB crystal

A method of determining the spatial configuration of a YCa₄O(BO₃)₃ (YCOB) crystal is introduced. The type-I phase-matching points for the sum-frequency of 1.064 μm and 0.532 μm, as well as the conversion efficiency for YCOB samples cut in different directions, have been measured. When the input intensity is 0.76 GW/cm², the third-harmonic generation (THG) conversion efficiency for the (106°, 77.2°)-cut YCOB crystal reaches 26.2%, which is the highest that we know so far. Both the calculations and the experiments show that the optimum THG configuration for a YCOB crystal is near (106°, 77.2°), or other equivalent directions in space. Received: 11 September 2000 / Revised version: 25 January 2001 / Published online: 27 April 2001     

Design of different bandwidth dispersive mirrors

Dispersive mirrors in the wavelength range of 960–1110 nm, 700–900 nm, 950–1150 nm, 600–900 nm, 900–1200 nm, 600–1000 nm and 550–1050 nm are designed, respectively. From the design results, we analyse the choice of material and the approach to dispersion compensation. Furthermore, along with the increase of bandwidth, interaction between group delay dispersion (GDD) oscillation and high reflectivity, and influence of bandwidth on both GDD ripple and reflectivity are discussed.     

Influence of annealing process on conductive properties of Nb-doped TiO2 polycrystalline films prepared by sol-gel method

Nb-doped TiO₂ (TNO) thin films were prepared by sol-gel dip-coating method with Nb content in a wide range of 0-20 at.%. The prepared films were preheated at 400 °C and then undertaken by two different post-annealing processes: (a) three times vacuum annealing and (b) multi-round annealing. The designed multi-round annealing was shown to be an effective way to improve the conductive properties of the films, compared to the traditional vacuum annealing process. The minimum resistivity reached approximately 0.5 Ω cm with Nb doping concentration around 12 at.%, and the carrier density increased with Nb-doping concentration until the critical point of 12 at.%, which might be the optimal doping content for our TNO films prepared by sol-gel method.     

Solution-combusting preparation of mono-dispersed Mn3O4 nanoparticles for electrochemical applications

Manganese oxide (Mn₃O₄) nanoparticles with average diameter of 15 nm were prepared using alcohol solution of manganese chloride as starting material via a facile solution-combusting method. The flame core zone was chosen to prepare mono-dispersed and high crystalline products, which were employed to modify glassy carbon electrode and detect dopamine via cyclic voltammetry. The results exhibited excellent electrochemical sensitivity. A linear relationship between the concentration of dopamine and its oxidation peak current was obtained by differential pulse voltammetry, which will find wide application in the biological detection.