Cloning,Expression, Purification,and Characterization of β-Galactosidase from Bifidobacterium longum and Bifidobacterium pseudocatenulatum

Expression and purification of β-galactosidases derived from Bifidobacterium provide a new resource for efficient lactose hydrolysis and lactose intolerance alleviation. Here, we cloned and expressed two β-galactosidases derived from Bifidobacterium. The optimal pH for BLGLB1 was 5.5, and the optimal temperature was 45 °C, at which the enzyme activity of BLGLB1 was higher than that of commercial enzyme E (300 ± 3.6 U/mg) under its optimal conditions, reaching 2200 ± 15 U/mg. The optimal pH and temperature for BPGLB1 were 6.0 and 45 °C, respectively, and the enzyme activity (0.58 ± 0.03 U/mg) under optimum conditions was significantly lower than that of BLGLB1. The structures of the two β-galactosidase were similar, with all known key sites conserved. When o-nitrophenyl-β-D-galactoside (oNPG) was used as an enzyme reaction substrate, the maximum reaction velocity (V_max) for BLGLB1 and BPGLB1 was 3700 ± 100 U/mg and 1.1 ± 0.1 U/mg, respectively. The kinetic constant (K_m) of BLGLB1 and BPGLB1 was 1.9 ± 0.1 and 1.3 ± 0.3 mmol/L, respectively. The respective catalytic constant (k_cat) of BLGLB1 and BPGLB1 was 1700 ± 40 s⁻¹ and 0.5 ± 0.02 s⁻¹, respectively; the respective k_cat/K_m value of BLGLB1 and BPGLB1 was 870 L/(mmol∙s) and 0.36 L/(mmol∙s), respectively. The K_m, k_cat and V_max values of BLGLB1 were superior to those of earlier reported β-galactosidase derived from Bifidobacterium. Overall, BLGLB1 has potential application in the food industry.     

白首乌中C21甾苷对酪氨酸酶二酚酶活力的影响

测定滨海白首乌中有效成分C21甾苷对酪氨酸酶活性作用的影响.首乌C21甾苷经分离纯化后,得到的组分C21甾苷(Ⅲ)对酪氨酸酶二酚酶活性的抑制作用表现为可逆抑制效应.其对二酚酶的抑制作用显示浓度依赖关系,测定导致酶活力下降50%的抑制剂浓度(IC50)为0.078mg/mL,其抑制作用为竞争性抑制效应.     

Computational fluid dynamic-discrete element method coupling analysis of particle transport in branched networks

An understanding of the particle transport characteristics in a branched network helps to predict the particle distribution and prevent undesired plugging in various engineering systems.Quantitative analysis of particle flow characteristics is challenging in that experiments are expensive and particle flow is difficult to detect without disturbing the flow.To overcome this difficulty,man-made fractal tree-like branched networks were built,and a coupled computational fluid dynamic and discrete element method model was applied.A series of numerical simulations was carried out to analyze the influence of fractal structure parameters of networks on the particle flow characteristics.The joint influence of inertial,shunt capacity and superposition from upstream branches on particle flow was investigated.The injection position at the inlet determined the particle velocity and its future flow path.The particle density ratio,particle size and bifurcation angle had a greater influence on the shunting of K2 branches than that in the K1 level and N_k22/N_k21 reached a maximum at 60°.Compared with a network with an even number of branches,there was a preferential branch when the branch number was odd.The preferential branch effect or asymmetry degree of the level(K2)branches had a more significant impact on particle shunting than that from the upstream branches(K1).     

金红石TiO_2中本征缺陷扩散性质的第一性原理计算

基于密度泛函理论的爬坡弹性带方法,对金红石相二氧化钛晶体中钛间隙、钛空位、氧间隙、氧空位4种本征缺陷的扩散特征进行了研究.对比4种本征缺陷在晶格内部沿不同扩散路径的过渡态势垒后发现,缺陷扩散过程呈现出明显的各向异性.其中,钛间隙和氧间隙沿[001]方向具有最小的扩散势垒路径,激活能分别为0.505 eV和0.859 eV;氧空位和钛空位的势垒最小的扩散路径分别沿[110]方向和[111]方向,激活能分别为0.735 eV和2.375 eV.     

在任意温度的热库中量子位的消相干

本文在Markov 近似下推导了在任意温度的热库中,一个量子位(qubit)的主方程,并由此讨论了由于振幅阻尼而引起的量子位消相干(decoherence). 结论表明量子位的跃迁频率与热库的特征频率及截止频率的关系对消相干有明显的影响。     

磁共振成像谱仪梯度波形分析

梯度是磁共振成像（MRI）的关键环节.通过采集谱仪梯度波形信号并进行分析,提取出各通道波形的特征点,从而有助于快速准确地判断谱仪梯度硬件电路或脉冲序列编写是否存在问题.采用虚拟仪器LabVIEW软件控制高速采集卡DAQ-2005设计实现多路采集系统,对谱仪的梯度输出进行采集.通过对波形数据进行直方图统计、滤波、差分计算等分析,提取出波形的特征点,这些特征点包含时间与幅度信息.使用实验室自主研发的谱仪进行了多次实验,对该方法进行验证,证明了该方法的有效性,也为谱仪研制和脉冲序列开发提供了一种辅助测试方法.     

Necklace solitons in Bessel photonic lattice: Stability and internal oscillation

Stability, internal modes and internal oscillation of 12-pearled necklace solitons in photorefractive crystal with imprinted Bessel photonic lattices are investigated. It is shown that the imaginary parts of internal modes are negligible comparing with real parts. The stable solitons perform long-distance and quasi-periodic oscillation of intensity and shape under the perturbation of internal modes.     

Wafer-Level Testable High-Speed Silicon Microring Modulator Integrated with Grating Couplers

A wafer-level testable silicon-on-insulator-based microring modulator is demonstrated with high modulation speed, to which the grating couplers are integrated as the fiber-to-chip interfaces. Cost-efflcient fabrications are realized with the help of optical structure and etching depth designs. Grating couplers and waveguides are patterned and etched together with the same slab thickness. Finally we obtain a 3-dB coupling bandwidth of about 6Ohm and 10 Gb/s nonreturn-to-zero modulation by wafer-level optical and electrical measurements.     

Analysis on electrical characteristics of high-voltage GaN-based light-emitting diodes

<正>In order to investigate their electrical characteristics,high-voltage light-emitting-diodes(HV-LEDs) each containing four cells in series are fabricated.The electrical parameters including varying voltage and parasitic effect are studied. It is shown that the ideality factors(IFs) of the HV-LEDs with different numbers of cells are 1.6,3.4,4.7,and 6.4.IF increases linearly with the number of cells increasing.Moreover,the performance of the HV-LED with failure cells is examined.The analysis indicates that the failure cell has a parallel resistance which induces the leakage of the failure cell.The series resistance of the failure cell is 76.8Ω,while that of the normal cell is 21.3Ω.The scanning electron microscope(SEM) image indicates that different metal layers do not contact well.It is hard to deposit the metal layers in the deep isolation trenches.The fabrication process of HV-LEDs needs to be optimized.     

光纤微位移法测量固体线膨胀系数

本文绘出了一种金属固体线膨胀系数的测量方法,即采用光纤位移传感器的方法（光纤微位移法）来测量固体的线膨胀系数．测量了黄铜的线胀系数,分别用逐差法和线性回归法处理了实验数据,并与标准值进行了比较．