Synthesis and Characterization of Novel Orange-emitting Iridium（Ⅲ） Complexes with Diphenylquinoline Ligands Containing Fluorinated Substituent

Three new cyclometalated iridium（m） complexes based on ligands of diphenylquinoline with fluorinated subsfituents were prepared, and characterized by elemental analysis （EA）, ^1H NMR, and mass spectroscopy （MS）. The photophysical and electrophosphorescent properties of the complexes were briefly discussed.     

含锆层柱蒙脱石对1,2,4三甲基苯歧化反应的催化作用

用离子共聚法合成了硅锆层柱蒙脱石（ＳｉＺｒＰＩＬＭ）和铁锆层柱蒙脱石（ＦｅＺｒＰＩＬＭ），考察了它们对１，２，４三甲基苯（１，２，４ＴｒＭＢ）歧化反应的催化性能．１，２，４ＴｒＭＢ在催化剂样品上可发生歧化反应和异构化反应，歧化反应选择性达８０％以上．随着催化剂预处理温度的提高，１，２，４ＴｒＭＢ转化率下降，歧化反应选择性和四甲基苯（ＴｅＭＢ）中１，２，４，５ＴｅＭＢ含量则升高．催化剂对１，２，４ＴｒＭＢ歧化反应有择形催化作用，１，２，４，５ＴｅＭＢ和间二甲苯、邻二甲苯为主要产物，并且其含量偏离其热力学平衡组成，ＴｅＭＢ中１，２，４，５ＴｅＭＢ的含量在８５％以上．     

N-取代苯并咪唑和N-取代-2-硫代噻唑烷酮类化合物的质谱研究

本文所研究的7种N-取代苯并咪唑和硫代噻唑烷酮类化合物是一类新合成的具有较高杀菌活性的化合物。本文利用电子轰击质谱技术对表中所列的化合物进行了研究。在高分辨精确质量测量和亚稳离子测定的基础上着重讨论了分子内3、4位C—C键的断裂和与杂环     

A New Efficient Synthesis of p-Nitrocalix[4]arene

A new efficient synthesis of p-nitrocalix[4]arene from calix[4]arene by using nitrogen dioxide is described.The compound is an useful intermediates for the introduction of other functional groups to obtain N containing substituted calix[4]arene.The reaction mechanism is briefly discussed.     

A novel three-component reaction for the synthesis of new 4-azafluorenone derivatives

Reaction of arylidenemalononitriles, 1,3-indanedione, and mercaptoacetic acid or 4-methylbenzenethiol is successfully carried out using microwave heating. It is an efficient and promising synthetic strategy to build the indenopyridine skeleton.     

胶束溶液中高氯酸二水(四胺)合钴(Ⅲ)配合物催化磷酸二酯水解的研究

本文合成了疏水性高氯酸二水（四胺）合钴（Ⅲ）配合物，研究了它与非离子表面活性剂Brij35形成的金属2胶束催化二（对硝基苯酚）磷酸二酯水解的动力学及其机理。结果表明此金属胶束对磷酸二酯水解的速率大约提高10^4倍，这主要是由于表面活性剂胶束的pH效应和浓聚效应所致，暗示着顺式二水类配合物形成的金属胶束是一个潜在的磷酸二酯水解剪切的催化剂。     

MgFe2O4-Fe2O3纳米粉体的软化学合成及电磁学特性

Nano-MgFe₂O₄-Fe₂O₃ magnetic powders were synthesized by citrate gel under microwave irradiation. The structure，particle size distribution，electromagnetic characteristics of nano-MgFe₂O₄-Fe₂O₃ were characterized by using TG-DTA, X-ray, electronic microscope, nano-size measurement and electromagnetism measurement apparatus。The results show that the product is a mixture of MgFe₂O₄ and Fe₂O₃ with average size of 44 nm, tanδ for the product is 0.265 and 0.610 at frequency of 1.0 GHz and 1.8 GHz respectively.     

Single crystal tin nano-rod arrays electrodeposited by a soft template

Single crystal tin nano-rod arrays were fabricated by the electrodeposition method when amphiphilic triblock copolymer P123 was used as a soft template at a concentration much lower than that for forming a liquid crystalline phase.     

Highly visible-light luminescence properties of the carboxyl-functionalized short and ultrashort MWNTs

Luminescence of the short multiwalled carbon nanotubes (MWNTs) conjugated with carboxylic acid groups has been studied. The results show that the carboxyl-functionalized short MWNTs could emit luminescence and the emission peak appears at 500 nm with a corresponding optimal excitation wavelength centering at 310 nm. When the short MWNTs are filtered through 0.15 μm polytetrafluoroethylene (PTFE) membrane, the ultrashort MWNTs are obtained from the filtrate. An interesting feature for the ultrashort MWNTs is that the emission intensity is strengthened and the peak is slightly blue shifted to 460 nm. This result indicates that the luminescence properties of MWNTs are strongly affected by the tube length. After chemical oxidization cutting, defects and carboxylic acid groups at the tube end and/or sidewall can be produced; the more shorten of MWNTs, the better dispersion and carboxylic passivation of the nanotubes, and the more intense luminescence emissions. The broad emissions are logically attributed to the trapping of excitation energy by defect sites in the carboxyl-functionalized nanotube structure.     

Aerobic oxidation assisted by ligand-free palladium catalysts

Aerobic oxidation of electron-rich benzylic and phenyl allylic alcohols was achieved with high yields with only 0.1 mol.% of Pd(OAc)2 catalyst in the absence of any ligand. This procedure was expected to be valuable for realistic industrial-scale applications from both economic as well as environmental points of view.