How the Aggregates Determine Bound Rubber Models in Silicone Rubber? A Contrast Matching Neutron Scattering Study

The correlation between aggregates and bound rubber structures in silicone rubbers(S(phr)) with various silica fractions(ΦSi) has been investigated by contrast matching small-angle neutron scattering(SANS), swelling kinetics, and low-field nuclear magnetic resonance(NMR).Mixed solvents with deuterated cyclohexane fractions of 4.9% and 53.7% were chosen to match the scattering length densities of the matrix(SMP(phr)) and the filler(SMS(phr)), respectively. All the data consistently suggest that:(i) There is a critical threshold ΦSic between 10 and 30 phr;below ΦSic, the isolated aggregates are dominant, while beyond ΦSic, some rubber fraction is trapped among the agglomerate;(ii) ΦSiindependent thicknesses around 7.5 nm(NMR) and 8.6 nm(SANS) suggest that the bound rubber formation is determined by inherent properties of the components, and the power-law around 4.2 suggests an exponential changed gradient density of the bound rubber;(iii) SMS(80) presents a bicontinuous bound rubber with three characteristic lengths of 41, 100, and 234 nm. The expanded correlation length, a 20 nm smaller aggregate sizes suggest that such existent bicontinuous network in dry samples with less ΦSi is kind of impacted by swelling. With the obtained bound rubber models, the reinforcing mechanism of filled silicone rubber is elucidated.     

An Improved Approach for Practical Synthesis of 5-Hydroxymethyl-2′-deoxycytidine (5hmdC) Phosphoramidite and Triphosphate

5-Hydroxymethyl-2′-deoxycytidine (5hmdC) phosphoramidite and triphosphate are important building blocks in 5hmdC-containing DNA synthesis for epigenetic studies. However, efficient and practical methods for the synthesis of these compounds are still limited. The current research provides an intensively improved synthetic method that enables the preparation of commercially available cyanoethyl-protected 5hmdC phosphoramidite with an overall yield of 39% on 5 g scale. On the basis of facile and efficient accesses to cyanoethyl protected-5hmdU and 5hmdC intermediates, two efficient synthetic routes for 5hmdC triphosphate were also developed.     

A new technique for carrying out real-time measurements of crystal growth rate

The growth rates of crystal interfaces have been measured by using a new technique — the laser diffraction metering technique. It is simple, visualized, fast and has high precision. This paper describes the basic principle, operation method and the precision of the technique.     

基于二氧化硅胶体晶体薄膜和反射干涉光谱的蛋白冠监测方法

生物分子与纳米材料作用形成的"蛋白冠"影响纳米材料的物理和化学性质,目前缺少有效的原位实时技术监测蛋白冠的形成过程.本研究基于二氧化硅胶体晶体薄膜和反射干涉光谱法,研究了三种代表性血液蛋白质在二氧化硅纳米粒子表面的蛋白冠形成过程,结果表明这三种蛋白具有不同的蛋白冠形成过程及参数;研究了人血清白蛋白在三种表面曲率的二氧化...     

Thienylmethylene Oxindole Based Conjugated Polymers via Direct Arylation Polymerization and Their Electrochromic Properties

Direct arylation methods have been used to polymerize thienylmethylene oxindoles(TEIs) and 3,3-bis[[(2-ethylhexyl)oxy]methyl]-3,4-dihydro-2 H-thieno-[3,4-b][1,4]dioxepin(ProDOT) for new donor-acceptor conjugated polymers. The polymers exhibited blue hues in neutralstate with distinct color-to-transmissive reversible electrochromic switching under applied potentials from 0 V to +1.5 V, and showed high coloration efficiencies(436-438 cm~2·C~(-1)) in near-infrared regions with high switching speeds around 1-2 s under ambient conditions.     

用同步辐射X-荧光定量测定电泳分离后蛋白条带内的微量元素

建立了同步辐射X荧-光(SRXRF)定量测定生物样品等电聚焦(IEF)分离后蛋白条带内的微量元素Fe、Cu和Zn的方法。用薄层聚丙烯酰胺凝胶分离人血红蛋白后,用SRXRF测定了各亚型条带内的金属含量,用加一定量金属的含蛋白聚丙烯酰胺凝胶做SRXRF定量测定蛋白条带内微量元素Fe、Cu和Zn的定量标准,校准曲线线性回归系数r在0~8μg/g范围内均大于0.99;检出限分别为2.43、1.12和0.96μg/g;测定蛋白条带内Fe和Zn的回收率分别为90.4%和115.7%。该联用技术可用于生物样品中微量元素的化学形态分析,同时给出蛋白质的微量元素组成和等电点等信息。     

高效液相色谱切换波长法测定多组分体系

1引言目前植物激素常采用反相高效液相色谱法检测,但植物中激素等多种组分同时存在,单一波长不能使每个组分都在最佳检测波长下检测。本实验采用切换波长法对植物样品进行多组分检测分析,提高了检测灵敏度。采用反相高效液相色谱法(HPLC)同时测定油菜中的内源激素赤霉素(GA3)、     

马钱子的质量控制方法研究

研究建立马钱子的两种质量控制方法,以便进行相互校验。选择适宜的测定波长或波长区间,采用计算机程序进行计算,不经提取分离直接测定马钱子中士的宁和马钱子碱的含量。士的宁的线性范围为8.0～30.0 μg·mL-1, r=0.999 9, 马钱子碱的线性范围为7.0～31.2 μg·mL-1, r=0.999 4, 两种方法对于士的宁和马钱子碱的平均回收率和相对标准偏差分别为98.18%～99.82%,0.56%～1.54%和100.5%～100.6%,0.57%～0.62%。新建立的质量控制方法简便、快速、重现性好,可作为马钱子的质量控制方法。     

Measurement Uncertainty and Its Connection to Quantum Coherence in an Inertial Unruh–DeWitt Detector

The dynamic characteristics of measured uncertainty and quantum coherence are explored for an inertial Unruh–DeWitt detector model in an expanding de Sitter space. Using the entropic uncertainty relation, the uncertainty of interest is correlated with the evolving time t, the energy level spacing δ, and the Hubble parameter H. The investigation shows that, for short time, a strong energy level spacing and small Hubble parameter can result in a relatively small uncertainty. The evolution of quantum coherence versus the evolving time and Hubble parameter, which varies almost inversely to that of the uncertainty, is then discussed, and the relationship between uncertainty and the coherence is explicitly derived. With respect to the l₁ norm of coherence, it is found that the environment for the quantum system considered possesses a strong non-Markovian property. The dynamic behavior of coherence non-monotonously decreases with the growth of evolving time. The dynamic features of uncertainty and coherence in the expanding space with those in flat space are also compared. Furthermore, quantum weak measurement is utilized to effectively reduce the magnitude of uncertainty, which offers realistic and important support for quantum precision measurements during the undertaking of quantum tasks.     

Analysis of phantom centering positioning on image noise and radiation dose in axial scan type of brain CT

ABSTRACT

This study examined the dose and image quality according to the position change of a human phantom in a CT scan. This study used an MDCT 128 Slice CT Scanner instrument. An axial scan was performed with a 16 cm CTDI phantom of a human phantom, and the dose was measured using a pencil chamber meter. The phantom was scanned 10 cm above and below the isocenter and 15 cm above the right and left. The position of the phantom is indicated by C-0 in the isocenter position, S-10 in the upper 10 cm, I-10 in the lower 10 cm, R-15 in the right 15 cm, and L-15 in the left 15 cm. The test was performed 30 times using the brain CT protocol to calculate the dose and the dose width product (DWP). The acquired images were analyzed using the ImageJ program. Statistical analysis was performed using SPSS with one-way ANOVA (p < .05). The mean DWP values of the CT scanner were C-0 31.97 mGy·cm, S-10 24.52 mGy·cm, I-10 24.28 mGy· cm, R-15 17.95 mGy·cm, and L15 17.6 mGy·cm. Compared to the isocenter (C-0), the DLP values measured at each site were 23.3% for S-10, 24% for I-10, 43.8% for R-15, and 44.9% for L15. A significant difference in the one-way ANOVA statistical process was observed (p>0.05). C-0 was measured to be 7.42 HU, S-10 7.87 HU, I-10 8.4 HU, R-15 117 HU, and L-15 13.6 HU for evaluating the image quality. Compared to C-0, S-10 was 5.39%, I-10 was 13.2%, R-15 was 57.6%, and L-15 was 83.2%. The PSNR for S-10, I-10, R-15, and L-15 was 17.37, 17.5, 16.62, and 16.37 dB, respectively. A good quality image can be obtained by positioning the subject precisely in the isocenter in the axial scan, if possible, because the irradiated dose to the subject is low, which can lead to an increase in noise in image reconstruction.