Analysis and modeling for time-dependent behavior of polymers exhibited in nanoindentation tests

Through the arrangement of the applied load, experimental nanoindentation results of polymethylmethacrylate (PMMA) and polyurethane (PU) employed to establish a mechanical model. The proposed model consists of irreversible delayed plastic (viscoplastic) deformation, irreversible viscous deformation, and reversible delayed elastic (viscoelastic) deformations. The phase lag exhibited between the responding depth and the oscillating load is found to be linear proportional to frequency in the range of 1-50 Hz. The residual cavity profile of the PMMA scanned by an atomic force microscope gives a validity of accommodation assumption applied in the present model. The effects of overshooting, which occurred in the dwelling process, are also discussed.     

A theory of coupled diffusion and large deformation in polymeric gels

A large quantity of small molecules may migrate into a network of long polymers, causing the network to swell, forming an aggregate known as a polymeric gel. This paper formulates a theory of the coupled mass transport and large deformation. The free energy of the gel results from two molecular processes: stretching the network and mixing the network with the small molecules. Both the small molecules and the long polymers are taken to be incompressible, a constraint that we enforce by using a Lagrange multiplier, which coincides with the osmosis pressure or the swelling stress. The gel can undergo large deformation of two modes. The first mode results from the fast process of local rearrangement of molecules, allowing the gel to change shape but not volume. The second mode results from the slow process of long-range migration of the small molecules, allowing the gel to change both shape and volume. We assume that the local rearrangement is instantaneous, and model the long-range migration by assuming that the small molecules diffuse inside the gel. The theory is illustrated with a layer of a gel constrained in its plane and subject to a weight in the normal direction. We also predict the scaling behavior of a gel under a conical indenter.     

Hg1-xCdxTe/Cd1-zZnzTe的X射线反射率及半峰全宽的动力学研究

X射线衍射摇摆曲线的计算机模拟是一种获得材料晶体质量参量的有效方法，其中材料本征摇摆曲线的计算是计算机模拟的基础。用X射线动力学理论计算了Hg1-xCdxTe和Cd1-zZnzTe本征反射率曲线，并研究了组分、膜厚分别对本征反射率和半峰全宽的影响。结果表明Hg1-xCdxTe和Cd1-zZnzTe的本征反射率和半峰全宽与材料组分和厚度有明显的依赖关系，且该依赖关系取决于X射线在材料中的散射和吸收的相对强弱。薄膜的厚度也是直接影响本征摇摆曲线峰形、半峰全宽和反射率的重要因素，当薄膜厚度小于穿透深度时，表征本征反射率曲线的各个参量均与薄膜厚度有直接的关系。对于(333)衍射面，碲镉汞材料厚度大于7μm后，本征反射率和半峰全宽将不再发生明显变化。     

软x射线近贴显微技术

软x射线近贴显微技术不但可使活的生物样品成象,分辨率高于光学显微镜,而且人为的样品准备程序在该技术中都可避免。本文描述了用高功率激光打靶产生的等离子体作为软x射线源而进行的近贴显微研究,并得到了分辨率好于1μm的结果。     

北京同步辐射装置3B1B生物光谱实验站

本文介绍北京同步辐射装置（ＢＳＲＦ）３Ｂ１Ｂ光束线、生物光谱实验站和圆二色谱仪的基本情况。报道北京正负电子对撞机（ＢＥＰＣ）同步辐射专用光期间，我们在站测量了１１种手征性生物和药物样品的圆二色（ＣＤ）谱，首次在国内利用同步辐射光获取了Ｄ－苯丙氨酸等样品的ＣＤ谱和Ｄ－及Ｌ－亮氨酸对称的ＣＤ曲线。     

Electronic Structure and Magnetic Properties of SmCo7-xZrx

The electronic structure and magnetism of SmCo_7-xZr_x alloy are investigated using the spin-polarized MS-X. method. The results show that a few of electrons are transferred to the Sm(5d⁰) orbital due to orbital hybridization between Sm and Co atoms. The exchange interactions between 3d and 5d electrons are more important than the polarization effects of the conductive electrons, thus it is the main reason resulting in the long-range ferromagnetic order in SmCo_7-xZr_x. The Curie temperature of SmCo_7-xZr_x is generally lower than that of corresponding pure Co, which may be explained by the weaker average coupling strength between Co lattices due to some negative couplings mainly occurring of 2e site. The calculated results for the Sm₅Co₃₂Zr₂ cluster may lead to a better understanding of why SmCo_7-xZr_x is stable phase. Since the spin-up DOS peak of d electrons at E_F arises and the bonding of electrons at E_F strengthens with increasing Zr concentration, which results in the internal energy of the system decrease, the stable ferromagnetic order forms in SmCo_7-xZr_x.     

Behaviors of the positive temperature coefficient of resistance of poly(styrene‐co‐n‐butylacrylate) filled with Ni‐plated core‐shell polymeric particles

Conductive composite films of poly(styrene‐co‐n‐butylacrylate) copolymers filled with low‐density, Ni‐plated core‐shell polymeric particles were prepared and their behaviors of positive temperature coefficient of resistance (PTCR) were investigated. When the conductive fillers in the composite film were loaded beyond the critical volume, 10 up to 25 vol %, composite films exhibited a unique electrical resistant transition behavior, which the electrical resistance rapidly increased by several orders of magnitude at the critical temperature. The PTCR transition temperature, in general, occurred before the glass transition temperature of polymer matrix. Further increased the conductive filler loading to 30 vol %, the overpacked conduction paths were formed in the entire composite and the PTCR effects became blurred. While the composite film treated with thermal cycle several times from room temperature up to 120 °C, the electrical resistivity increased accompanied with the shift of the PTCR transition to lower temperature. The reason might have been caused by the formed interfacial cracks within the composite film. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 322–329, 2007     

Determination of the orientation of the electric field gradient at the Cu(1) site from the Mössbauer spectra of textured pellets made of YBa2Cu3O7−δ superconductor

A textured pellet of YBa₂Cu₃O_7?δ was prepared and doped with⁵⁷Co. After subsequent heat treatments the cobalt was found at the two copper sites. The degree of alignment of individual crystallites (about 40%) was determined from the Mössbauer spectrum by using a method developed by the authors [1]. The same method showed that the most characteristic doublet component of such spectra (δ=0.08 mm/s; |ΔE _Q|=1.96 mm/s) is associated with a site, most probably a Cu(1) site, where the EFG is parallel to thec direction of the unit cell. The sign ofV _zz turned out to be negative, giving a negative quadrupole splitting (ΔE _Q=?1.96 mm/s) for that component.     

Frame Wavelets with Compact Supports for L^2（R^n）

The construction of frame wavelets with compact supports is a meaningful problem in wavelet analysis. In particular, it is a hard work to construct the frame wavelets with explicit analytic forms. For a given n × n real expansive matrix A, the frame-sets with respect to A are a family of sets in R^n. Based on the frame-sets, a class of high-dimensional frame wavelets with analytic forms are constructed, which can be non-bandlimited, or even compactly supported. As an application, the construction is illustrated by several examples, in which some new frame wavelets with compact supports are constructed. Moreover, since the main result of this paper is about general dilation matrices, in the examples we present a family of frame wavelets associated with some non-integer dilation matrices that is meaningful in computational geometry.     

Image Displaying Method of Ground-Based Millimeter Wave Radiometric Imaging System

The image displaying methods used in a millimeter wave radiometric imaging system have great influence on its imaging quality. In order to obtain high quality millimeter wave radiometric images, intensive studies on the image displaying methods are needed. This paper describes the image displaying method of Ground-based 8mm Millimeter Wave Radiometric Imaging (GMWRI) system and compares two different image displaying methods. The experimental results prove the unequal size element arc displaying method fits GMWRI system better.