基于一组卡尔曼滤波器信息融合的故障诊断

为了能及时准确地诊断发动机的传感器和执行机构故障,文章提出了基于一组卡尔曼滤波器信息融合的方法进行故障诊断;首先根据传感器特性设计了一组滤波器用于传感器故障诊断、隔离,每个滤波器针对一个传感器进行设计;其次根据执行机构故障特性设计了一组卡尔曼滤波器进行执行机构偏差估计,从而对执行机构进行故障诊断、隔离;接着给出了传感器、执行机构信息融合的诊断方案;最后分别给传感器、执行机构添加故障进行方案验证,仿真结果得出在传感器或者执行机构任意部件出故障的情况下,该融合方法可以有效地诊断并隔离出有故障的传感器或者执行机构。     

Antibacterial and Miscibility Properties of Chitosan/Collagen Blends

The miscibility, bioactivity, and antibacterial properties of chitosan/collagen specimens were systematically studied. The specimens were prepared by blending collagen and chitosan with varying deacetylation degrees in solutions; the collagen molecules had been extracted from pigskins using the acid swelling-pepsin digestion method. To understand the miscibility properties of collagen and chitosan molecules, the intrinsic viscosity and differential scanning calorimetry analysis of collagen, chitosan, and collagen/chitosan specimens were performed. The instrinsic viscosity measurements suggested that chitosan and collagen molecules with varying deacetylation degrees were miscible at molecular level for all compositions and degrees of deacetylation of chitosan/collagen mixture solutions prepared in this study. Fourier transform infrared analyses suggested that the percentage of preserved triple helix structures present in collagen molecules in collagen/chitosan specimens decreased with increasing chitosan contents, since the ratios of peak absorbance at 1239 cm^?1 of amide III and 1455 cm^?1 of C?H bending of collagen/chitosan specimens decreased significantly with increase in their chitosan contents. Abnormally high denaturation temperatures (T_d) were observed as the chitosan contents of collagen/chitosan specimens reached 40 wt%, at which T_d of collagen molecules was even higher than that of the corresponding pure chitosan molecules with varying deacetylation degrees. The antibacterial activity of collagen/chitosan blends increased consistently with increasing deacetylation degrees and concentrations of chitosan molecules in collagen/chitosan solutions. Possible explanations for these interesting thermal denaturation, antibacterial, and miscibility properties of chitosan/collagen specimens are reported.     

Electroluminescence enhancement in ultraviolet organic light‐emitting diode with graded hole‐injection and ‐transporting structure

Electroluminescent intensity and external quantum efficiency (EQE) in ultraviolet organic light‐emitting diodes (UV OLEDs) have been remarkably enhanced by using a graded hole‐injection and ‐transporting (HIT) structure of MoO₃/N,N ′‐bis(naphthalen‐1‐yl)‐N,N ′‐bis(phenyl)‐benzidine/MoO₃/4,4′‐bis(carbazol‐9‐yl)biphenyl (CBP). The graded‐HIT based UV OLED shows superior short‐wavelength emis‐ sion with spectral peak of ～410 nm, maximum electroluminescent intensity of 2.2 mW/cm² at 215 mA/cm² and an EQE of 0.72% at 5.5 mA/cm². Impedance spectroscopy is employed to clarify the enhanced hole‐injection and ‐transporting capacity of the graded‐HIT structure. Our results provide a simple and effective approach for constructing efficient UV OLEDs. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Charge redistribution and a shortening of the Fe—As bond at the quantum critical point of SmO1–xFxFeAs

Many researchers have pointed out that there is a quantum critical point (QCP) in the F‐doped SmOFeAs system. In this paper, the electronic structure and local structure of the superconductive FeAs layer in SmO_1–xF_xFeAs as a function of the F‐doping concentration have been investigated using Fe and As K‐edge X‐ray absorption spectroscopy. Experiments performed on the X‐ray absorption near‐edge structure showed that in the vicinity of the QCP the intensity of the pre‐edge feature at the Fe‐edge decreases continuously, while there is a striking rise of the shoulder‐peak at the As edge, suggesting the occurrence of charge redistribution near the QCP. Further analysis on the As K‐edge extended X‐ray absorption fine structure demonstrated that the charge redistribution originates mostly from a shortening of the Fe—As bond at the QCP. An evident relationship between the mysterious QCP and the fundamental Fe—As bond was established, providing new insights on the interplay between QCP, charge dynamics and the local structural Fe—As bond in Fe‐based superconductors.     

制冷型红外成像系统内部杂散辐射测量方法

杂散辐射是红外光学系统设计和检测过程中涉及的一项重要指标.为了定量测量红外成像系统内部杂散辐射, 提出一种基于辐射定标的测量方法, 并通过理论推导和实验验证以说明该方法的合理性.首先, 建立了不带光学系统的辐射定标模型, 即探测器直接接收定标源辐射能, 获得探测器内部因素对系统输出的影响; 然后将其与带有光学系统的定标结果进行比较, 得到由光学系统自身辐射对系统输出的影响, 进而计算红外成像系统内部杂散辐射; 最后通过实验证明了本文理论的正确性.该方法操作简单, 对实验条件要求低, 并可以精确地测量红外成像系统内部杂散辐射.可用于指导红外系统设计中的杂散辐射抑制, 验证系统杂散辐射分析结果是否准确以及检测系统杂散辐射指标是否合格.     

零气耗空气除湿实验研究

针对有热再生式压缩空气除湿装置在再生及冷吹过程中产生气耗的缺点,运用喷射器及恒压变温吸附再生原理设计了一种零气耗空气除湿工艺流程。在搭建小型实验台的基础上,通过改变喷射器引射率进行实验研究三种工况条件下活性氧化铝的吸附再生性能。实验结果表明:实验全过程能够保持一个相对稳定且有效的恒压变温吸附再生条件,且出口空气露点达到生产要求;随着喷射率的降低,吸附剂再生效果逐渐下降,而吸附效果逐渐上升。引射率为0.5时的再生时间约为引射率0.75的1.85倍,再生速率约为0.51倍。而引射率0.33,引射率0.5的吸附效率分别为引射率0.75的1.04倍,1.11倍,吸附稳定时间1.11倍,2.22倍。     

STZ诱导大鼠1型糖尿病进行性脑萎缩的磁共振成像及组织化学研究

1型糖尿病(T1DM)是一种慢性代谢疾病,主要表现为胰岛素分泌量较正常情况下降,会对人体的多个器官和系统造成持续性的损伤．关于糖尿病的横向研究发现糖尿病患者相比于正常人存在着显著的脑萎缩,但关于糖尿病引起的脑萎缩随时间发生进行性改变的研究比较少见．实验采用腹腔注射链脲佐菌素(STZ)来诱导建立大鼠的1型糖尿病模型,运用磁共振成像(MRI)的方法对萎缩的脑区进行定位并在造模后12周和20周两个时间点对脑萎缩的程度进行对比分析,然后运用组织化学染色的方法观察在MRI上出现进行性萎缩的脑区中的神经元所发生的病理改变．MRI的结果表明：STZ诱导的T1DM大鼠相比于正常对照组大鼠出现了显著性的全脑体积、灰质体积和白质体积的萎缩,并且在多个白质脑区和灰质脑区均出现了萎缩程度随着病程的延长而逐渐加重．组织化学染色的结果发现,STZ诱导的T1DM大鼠相对于正常对照组大鼠在体感皮层、运动皮层和海马CA3区,均出现明显的神经元萎缩现象．     

一种基于AlGaN和石墨烯的紫外-红外双色探测器

通过MOCVD和CVD生长技术,利用高Al组分Al Ga N和单层石墨烯材料进行纵向集成,成功制备了日盲紫外-近红外双色探测器。在工作温度为室温、调制频率为209 Hz以及工作电压分别为10 V和5 V的工作条件下,所制备的双色探测器在紫外波段263 nm处的响应度为5.9 m A/W,在近红外波段1.15μm处的响应度为0.67 m A/W,并且探测器的响应度均随着工作电压的增加而增大。     

粘土担载的钼基催化剂的制备、结构及CO加氢合成醇性能

采用溶胶凝胶法与等体积浸渍相结合制备了一系列以粘土为载体的K-Co-Mo催化剂. 采用XRD、N₂等温吸脱附、H_{26+的还原,但对Mo⁴⁺和Co²⁺的还原没有明显的影响. 催化剂经还原后,在其表面生成了一种更低价态的Mo^δ+(1<δ<4)物种,被认为是合成醇的活性中心. 与非负载催化剂相比,粘土担载的K-Co-Mo具有更高的合成醇性能. 负载型催化剂具有较高的活性物种分散度,并且其介孔结构在一定程度上延长了合成醇反应中间体的滞留时间,从而促进了低碳醇的生成. 经773 K还原的催化剂具有较高的活性,其原因可为催化剂表面具有较高含量的Mo^δ+物种.}     

基于神光Ⅲ原型的激光直接驱动自由面准等熵实验研究

长脉冲激光打靶的直接驱动方式效率较高,但对激光强度变化非常敏感。利用测量自由面速度历史的方法对激光直接驱动准等熵压缩实验技术进行了分析,为改进激光直接驱动的准等熵压缩实验技术提供技术基础。介绍了国内在神光III原型装置上首次开展的激光直接驱动自由面准等熵压缩实验。对实验靶型、激光波形、典型实验结果以及实验中的关键技术进行了分析。在激光能量为1000 J的实验中,使用成像型速度干涉仪获得了较为理想的准等熵压缩条纹图。实验发现,自由面速度达到11.3 km/s时,自由面反射的探针光信号消失。通过对比Multi-1D软件的理论模拟数据与实验处理的结果,发现由于Al自由面缺少约束,这类实验会造成波系复杂化的问题,但是对主冲击的研究还是有意义的。对某些特殊材料,在很难找到阻抗匹配窗口的条件下,利用激光直接驱动方式研究材料高压响应特性提供了另一条可实施的技术途径。