Synthesis and properties of one-dimensional Ni(Ⅱ) and Ni(Ⅱ)Cu(Ⅱ) complexes linked by hydrogen bond

Four dithiooxalato (Dto) bridged one-dimensional Ni(ll) and Ni(ll)Cu(ll) complexes (Me6[14]dieneN4)Ni2(Dto)2) (1), (Me6[14]dieneN4)CuNi(Dto)2 (2), (Me6[14]aneN4)Ni2(Dto)2 (3), and (Me6[14]aneN4)CuNi(Dto)2(4), were synthesized. These complexes have been characterized by elemental analysis, IR, UV and ESR spectra. The crystal structure of complex 3 was determined. It crystallizes in the monoclinic system, space group C2/c with a = 2.2425(4) nm, b = 1.0088(2) nm, c=1.4665(3) nm, β= 125.32(3)° ;Z=4; R = 0.076, Rw = 0.079. In the complex, Ni(1) coordinates four sulphur atoms of two Dto ligands in plane square environment. Ni(2) lies in the center of mac-rocyclic ligand. For Dto ligand, two sulphur atoms coordinate Ni(1), and O(1) coordinates Ni(2) and forms weak coordination bond. O(2) is linked to N(2) of macrocyclic ligand through hydrogen bond.     

Sorption of Co(II) ong-alumina in the presence and absence of fulvic acid</p> </p>

Summary The removal of heavy metal ion Co(II) from aqueous solution was studied usingg-Al₂O₃ by batch technique. The experiments were performed at T=20±2 °C, in 0.01M NaNO₃ solutions and under aerobic conditions. The effect of pH, ionic strength, fulvic acid (FA) and alumina amount on the sorption of Co(II) on alumina were also investigated. The pH affected the sorption of Co(II) significantly as compared with the effect of FA and ionic strength. The results indicated that strong chemical bonds are formed between Co(II) and functional groups of the bare or FA coated alumina, and a precipitation of Co(II) takes place on the alumina surface, induced by a transition from the adsorption to surface. The addition sequences of Co/FA on Co(II) sorption were also studied: the sorption of Co(II) in the ternary system was found independent of addition sequences.</p> </p>     

Discovery of a small molecule that inhibits the interaction of anthrax edema factor with its cellular activator, calmodulin

The catalytic efficiency of adenylyl cyclase activity of edema factor (EF) from Bacillus anthracis is enhanced by approximately 1000-fold upon its binding to mammalian protein calmodulin (CaM). A tandem cell-based and protein binding-based screen of a 10,000 member library identified a molecule that inhibits the EF-CaM interaction and therefore the adenylyl cyclase activity. A combination of fluorescence spectroscopy and photolabeling studies showed that the molecule targets the CaM binding region of EF. A series of related compounds were synthesized and evaluated to identify one compound, 4-[4-(4-nitrophenyl)-thiazolylamino]-benzenesulfonamide, that maintained activity against EF but showed minimal toxicity to two cultured cell lines. This compound represents an important reagent to study the role of EF in anthrax pathology and may represent a drug lead against anthrax infection.     

Intramolecular alkylative arylation of oxabicylic alkene: a potential diene approach for the synthesis of estrone and analogous steroid structures

Regioselective and stereospecific intramolecular alkylative arylation of unsaturated oxabicyclic diol 6, mediated by Lewis acid or strong protic acid to give the tetracyclic products 7a and 7b, as shown above, represents the first example of an electrophilic (cationic in character) ring-opening-cyclization of oxabicyclic alkene. This constitutes the key cyclization step for a long-standing and potentially useful diene approach for the synthesis of estrone and analogous steroid structures. [structure: see text]     

Flow injection determination of cobalt after its sorption onto polyurethane foam loaded with 2-(2-thiazolylazo)-p-cresol (TAC)

An electrochemically stable monolayer of tris(2,2'-bipyridyl)ruthenium(II) was obtained for the first time. It was based on the electrostatic attachment of Ru(bpy)(3)(2+) to the benzene sulfonic acid monolayer film, which was covalently bound onto glassy carbon electrode by the electrochemical reduction of diazobenzene sulfonic acid. The surface-confined Ru(bpy)(3)(2+) underwent reversible surface process, and reacted with the coreactant, tripropylamine, to produce electrochemiluminescence. In view of the stability of the electrode, the results strongly suggested that light was emitted from the surface-confined Ru(bpy)(3)(2+), not from the detached Ru(bpy)(3)(2+). The Ru(bpy)(3)(2+) modified electrode was used to the determination of tripropylamine. It showed good linearity in the concentration range from 5 muM to 1 mM with a detection limit of 1 muM (S/N=4). The good stability of the Ru(bpy)(3)(2+) modified electrode also showed that the benzene sulfonic acid monolayer film prepared can be served as an excellent support to construct multilayers.     

Combined application of INAA and PIXE for studying the regional aerosol composition in Southern Africa

As part of the SAFARI-92 biomass buming experiment, aerosol collections were carried out with several size-fractionating sampling devices at a number of sites in Southern Africa. One of the samplers used at all ground-based sites was a stacked filter unit (SFU). The SFU samples were analyzed by both INAA and PIXE analysis. The present paper gives an intercomparison of the analytical results obtained in order to assess the accuracy and to check the quality assurance of the analytical procedures. Twenty-one common elements were determined by both INAA and PIXE. Concentrations of 13 elements (i.e., Na, Mg, Al, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Zn and Br) were generally measured with sufficient precision in both techniques for performing the intercomparison. The INAA and PIXE data were compared in terms of PIXE/INAA concentration ratios on a sample by sample basis for the coarse and fine size fraction separately. the atmospheric concentrations for K, Mn and Fe agreed within 5–10%, the agreement between the data for the other common elements was typically better than 15%. Possible explanations for lower than 1.0 ratios for Cl, Br and Na are presented. The common elements were classified into groups according to their detectability and sensitivity in each technique.     

Microscale sample deposition onto hydrophobic target plates for trace level detection of neuropeptides in brain tissue by MALDI-MS

A sample preparation method that combines a modified target plate with a nanoscale reversed-phase column (nanocolumn) was developed for detection of neuropeptides by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). A gold-coated MALDI plate was modified with an octadecanethiol (ODT) self-assembled monolayer to create a hydrophobic surface that could concentrate peptide samples into a approximately 200-500-microm diameter spot. The spot sizes generated were comparable to those obtained for a substrate patterned with 200-microm hydrophilic spots on a hydrophobic substrate. The sample spots on the ODT-coated plate were 100-fold smaller than those formed on an unmodified gold plate with a 1-microl sample and generated 10 to 50 times higher mass sensitivity for peptide standards by MALDI-TOF MS. When the sample was deposited on an ODT-modified plate from a nanocolumn, the detection limit for peptides was as low as 20 pM for 5-microl samples corresponding to 80 amol deposited. This technique was used to analyze extracts of microwave-fixed tissue from rat brain striatum. Ninety-eight putative peptides were detected including several that had masses matching neuropeptides expected in this brain region such as substance P, rimorphin, and neurotensin. Twenty-three peptides had masses that matched peaks detected by capillary liquid chromatography with electrospray ionization MS.     

Sulfate Ions in Titania Polymorphs

Sol-gel titania was sulfated by using sulfuric acid as hydrolysis catalyst, or by impregnating with ammonium sulfate fresh samples prepared with nitric acid or ammonium hydroxide as hydrolysis catalyst. Samples were characterized with X-ray powder diffraction, infrared spectroscopy, thermogravimetry and atomic absorption spectroscopy. Sulfate ions were found anchored to brookite and anatase phases, because they have short O—O atomic bond lengths slightly larger than the largest O—O bond length of sulfate ion. Since the shortest O—O atomic bond in anatase is smaller than the one in brookite, the sulfate ions are then less deformed when they are anchored to anatase, and consequently more stable. Therefore when the sample temperature is raised, the brookite with sulfate ions was transformed mainly to anatase and not into rutile, which is the most probably transformation when these ions are not involved. Sulfate ions also hindered anatase and brookite crystallite growing and stabilized the crystalline structure of anatase. When the sulfate ions are lost the crystalline anatase phase is transformed into rutile, leaving a large number of vacancies that favored atom diffusion and consequently the growing of rutile crystallites. The crystalline evolution of the samples as a function of the annealing temperature is almost independent of the sulfating method.     

Identification and quantification of 13 components in Angelica sinensis (Danggui) by gas chromatography-mass spectrometry coupled with pressurized liquid extraction

Angelica sinensis (Danggui in Chinese), a well-known traditional Chinese medicine, is also used as a health food product for women's care in Europe and America. Therefore, the demand for Danggui is enormous throughout the world. Due to the shortage of Angelica sinensis, Angelica acutiloba and Angelica gigas are commonly used as the substitutes of Danggui in the market of southeast Asia. However, the three common Angelica roots showed variation in their genetic and chemical composition. Up to date, it is thought that ferulic acid, ligustilide and other phthalides such as butylidenephthalide are the biologically active components of Danggui. In this paper, the contents of 13 compounds including ferulic acid, Z-ligustilide, E-ligustilide, Z-butylidenephthalide, E-butylidenephthalide, 3-butylphthalide, 3-butylidene-4-hydroxyphthalide, senkyunolide A, 6,7-epoxyligustilide, senkyunolide F, senkyunolide H, senkyunolide I, and 6,7-dihydroxyligustilide were determined or estimated by using gas chromatography-mass spectrometry (GC-MS) coupled with pressurized liquid extraction (PLE). The results showed that GC-MS coupled with PLE offered a simple, rapid and high sensitive method to analysis of components in Angelica root. And the contents of investigated compounds in Angelica sinensis, Angelica acutiloba and Angelica gigas, which are used as Danggui in China, Japan and Korea, respectively, were highly variant. It is thought that interaction of multiple chemical compounds contributes to the therapeutic effects of Chinese medicines. However, the overall clinical efficacy of these different Danggui has not been determined. Therefore, comparison of chemical components and pharmacological activities of different Angelica root is helpful to elucidate the mechanism of therapeutic effects of Danggui.     

Synthesis and Characterization of Ag2S Nanocrystals in Hyperbranched Polyurethane at Room Temperature

Ag₂S nanoparticles in hyperbranched polyurethane matrix were prepared through the in situ reaction with thioacetamide as the sulfur source at room temperature. Transmission electron microscopic analysis revealed a uniform spherical shape for Ag₂S nanoparticles, with an average size of about 4-10 nm and a narrow size distribution. X-ray powder diffraction and UV-vis spectroscopy were also used to characterize the obtained nanoparticles