241Am-Be中子参考辐射的蒙特卡罗模拟研究

研究用于校准场所中子剂量监测仪表的241Am-Be中子参考辐射场计量特性。采用蒙特卡罗方法模拟了空气自由中子参考辐射(FRNR),GB/T 14055规定的最小尺寸中子参考辐射(SRNR)和实际中子参考辐射(ARNR)中不同检验点处中子周围剂量当量率、散射中子占比和能谱分布特征。研究结果表明,空气对FRNR中的剂量率和能谱分布影响小,近似为理想中子参考辐射;采用5%含硼聚乙烯作屏蔽的最小尺寸SRNR可减少热中子,降低散射中子占比,影锥法不适用于小尺寸中子参考辐射中对散射中子的修正;ARNR中的散射中子更少、占比更低,影锥法所得散射中子占比与理论值基本一致。     

Vertical assembly of carbon nanotubes for via interconnects

The via interconnects are key components in ultra-large scale integrated circuits(ULSI).This paper deals with a new method to create single-walled carbon nanotubes(SWNTs) via interconnects using alternating dielectrophoresis(DEP).Carbon nanotubes are vertically assembled in the microscale via-holes successfully at room temperature under ambient condition.The electrical evaluation of the SWNT vias reveals that our DEP assembly technique is highly reliable and the success rate of assembly can be as high as 90%.We also propose and test possible approaches to reducing the contact resistance between CNT vias and metal electrodes.     

Hierarchical nanowires for high-performance electrochemical energy storage

Nanowires are promising candidates for energy storage devices such as lithium-ion batteries, su- per（：apa.citors and lithium-air batteries. However, simple-structured nanowires have some limitations hence the strategies to make improvements need to be explored and investigated. Hierarchical nanowires with enhanced periormanee have been considered as an ideal candidate for energy storage due to the novel structures and/or synergistic properties. This review describes some of the recent progresses in the hierarchical nanowire merits, classification, synthesis and performance in energy storage applieat, ions. Herein we discuss the hierarchical nanowires based on their structural design from three major categories, including exterior design, interior design and aligned nanowire assembly. This review also briefly outlines the prospects of hierarchical nanowires in morphology control, property enhancement and application versatility.     

Na_3AlF_6-Al_2O_3系熔盐离子结构的拉曼光谱研究

利用激光共焦拉曼光谱仪测定了不同氧化铝含量的Na3AlF6-Al2O3体系的常温与升温拉曼光谱,通过解析该拉曼光谱总结了其离子结构的种类以及随温度的变化规律,并对相应的拉曼谱峰进行了归属。结果表明当温度升至1173K及以上时,样品开始熔化并出现AlF63-→AlF4-的转化,同时伴有复杂离子的生成。将实验结果与模拟计算结合,发现在氧化铝含量较高的样品中存在络合离子Al2O2F42-。     

一种基于多准则决策和PSO-LM混合优化算法的多峰Brillouin散射谱的特征提取方法

采用传统方法对多峰Brillouin散射谱进行拟合的过程中,通常是以谱线最大功率点为基准的,却忽略了其他比该点小但却是极值的功率点。这样获得的拟合曲线通常只有一个峰值,相当于把除最高峰之外还有多个小峰的多峰Brillouin散射谱进行了简化,导致大量有用信息的丢失。为了提高Brillouin散射谱的特征提取精度,提出了一种基于MCDM和PSO-LM混合优化算法的多峰Brillouin散射谱特征提取方法(MCDM-PSO-LM)。MCDM可以识别和准确定位多峰Brillouin散射谱的各个波峰和波谷;PSO-LM混合优化算法可以实现分别对各个波峰和波谷的曲线进行拟合并找到每一个波峰的中心频率,该算法既克服了PSO算法过早收敛于局部极值和LM算法依赖初值的问题,又可以将PSO算法的全局搜索能力和LM算法的局部收敛能力结合在一起。较传统算法而言,MCDM-PSO-LM算法保证了对最优值求解的速度和精度,提高了运算能力,使解析解最大限度地接近最优值。分别在不同信噪比和不同线宽条件下进行仿真验证,频移和温度误差分析结果表明,MCDM-PSO-LM方法可以对多峰Brillouin散射谱的各个波峰与波谷进行准确定位,可用于多峰Brillouin散射谱的特征提取,识别效果明显强于传统算法,提高了信息分析的准确性。     

Relative intensity noise induced by four-wave mixing in the case of two-wave transmission in an optical fiber

Four-wave mixing (FWM) is a significant nonlinear effect in wavelength division multiplexing (WDM) fiber-optic systems. For two-wave transmission, it is easily found that the FWM noise power decreases with frequency spacing and increases with signal power. However, the variation of relative intensity noise (RIN) with frequency spacing and signal power is only 2 dB at most. The intensity fluctuations induced by the energy exchange between the FWM generated new waves and the original ones are trivial and the influence of FWM on RIN can be neglected. It is also found that the increase of RIN with signal power is mainly attributed to stimulated Brillouin scattering (SBS) rather than FWM.     

Two localized CO2 laser treatment methods for mitigation of UV damage growth in fused silica

Two methods：high-power,short-time,single-shot irradiation（Method A） and low-power,long-time,multi-shot irradiation（Method B） are investigated to mitigate the UV damage growth in fused silica by using a 10.6-μm CO2 laser.To verify the mitigation effect of the two methods,the laser induced damage thresholds（LIDTs） of the mitigated sites are tested with a 355-nm,6.4-ns Nd：YAG laser,and the light modulation of the mitigation sites are tested with a 351-nm continuous Nd：YLF laser.The mitigated damaged sites treated with the two methods have almost the same LIDTs,which can recover to the level of pristine material.Compared with Method A,Method B produces mitigated sites with low crater depth and weak light modulation.In addition,there is no raised rim or re-deposited debris formed around the crater edge for Method B.Theoretical calculation is utilized to evaluate the central temperature of the CO2 laser beam irradiated zone and the radius of the crater.It is indicated that the calculated results are consistent with the experimental results.     

故障树模块化在装甲车辆灭火系统故障诊断中的应用

为了实现装甲装备灭火系统故障的快速诊断,提出了一种故障树模块化分析方法;对灭火系统故障树进行深度优先最左遍历,并记录遍历过程,按照遍历顺序对故障树中的每个事件进行标定,并将灭火系统故障树划分为相互独立的模块,依据划分的模块可以通过故障现象对模块内的故障进行排查及修复;实验结果分析表明,该方法可以快速修复模块故障,恢复系统功能,简化了以往对灭火系统所有子事件遍历查错的繁琐过程。该方法同样可以计算故障模块的失效概率,并可以实现故障模块的整体更换,恢复系统性能;证明了故障树模块化方法在灭火系统故障诊断中具有较高的效率,简化了灭火系统诊断流程,在装甲车辆其他系统故障诊断中具有借鉴作用,符合现代作战对于装备保障的需求。     

TX-100和CTAB交换动力学的核磁共振研究

运用核磁共振(NMR)方法分别测定了表面活性剂辛基苯聚氧乙烯醚(TX-100)和十六烷基三甲溴化铵(CTAB)在不同温度下的临界胶束浓度.阐述了应用1D NMR线型分析方法对表面活性剂快交换体系平均停留时间的定量测量.实验测量了TX-100和CTAB胶束溶液中表面活性剂分子在不同温度下的平均停留时间.结果显示,平均停留时间随温度的增加逐渐减小,说明TX-100和CTAB分子进出胶束的速率随温度的增加逐渐加快.利用阿伦尼乌斯公式拟合,获得了TX-100和CTAB的表观交换活化能,TX-100的表观交换活化能为17.6 k J/mol,CTAB的表观交换活化能为75.3 k J/mol.对TX-100和CTAB平均停留时间和表观交换活化能进行分析,得出平均停留时间和表观交换活化能与分子结构的关系:表观交换活化能反映的是疏水相互作用和静电斥力的大小;而平均停留时间不仅受活化能的影响,还与分子结构有关.     

作物覆盖条件下土壤中水热分布的稳态数值比较

本文应用非饱和多孔介质中传热传质的数学模型,考虑到作物根系和冠层的影响,对稳态情况下圆柱形士壤床中的水热分布进行了数值计算模拟。在不同环境条件下对土壤中的水热分布也进行了模拟计算。同时,在相同环境条件下对有作物覆盖的土壤床和无作物覆盖的土壤床中的水热分布也进行了模拟比较。文中数值模拟的结果较好地反映了实际情况。