铜（Ⅱ）－4－（吡啶－2′－甲基）－1，4，7，10－四氮杂环十三烷－11，13－二酮－α－氨基酸（5－取代邻菲罗啉）三元配合物的稳定性研究

用ｐＨ法在２５．０±０．１℃，Ｉ＝０．１ｍｏｌ·ｄｍ－３ＫＮＯ３条件下，测定铜（Ⅱ）－４－（吡啶－２′－甲基）－１，４，７，１０－四氮杂环十三烷－１１，１３－二酮－α－氨基酸（５－取代邻菲罗啉）三元配合物的稳定常数；比较了带吡啶甲基二氧四胺大环配体和二氧四胺大环配体与Ｃｕ（Ⅱ）的配位能力、配位方式；研究了该三元体系配合物稳定性与配体α－氨基酸酸碱强度之间的直线自由能关系；探讨了Ｃｕ（Ⅱ）和５－取代邻菲罗啉之间的ｄ－ｐ反馈π键以及邻菲罗啉取代基Ｈａｍｍｅｔｔ诱导效应与该三元配合物稳定性之间的关系。讨论了４－（吡啶－２′－甲基）－１，４，７，１０－四氮杂环十三烷－１１，１３－二酮和４－（喹啉－２′－甲基）－１，４，７，１０－四氮杂环十三烷－１１，１３－二酮与Ｃｕｘｐｈｅｎ所形成配合物的不同空间结构及其对配合物稳定性产生的影响。     

Crystal Structure and Molecular Absolute Configuration of （＋）－Isocedranol （C_（15）H_（26）O）

ＣｒｙｓｔａｌＳｔｒｕｃｔｕｒｅａｎｄＭｏｌｅｃｕｌａｒＡｂｓｏｌｕｔｅＣｏｎｆｉｇｕｒａｔｉｏｎｏｆ（＋）－Ｉｓｏｃｅｄｒａｎｏｌ（Ｃ_（１５）Ｈ_（２６）Ｏ）￥ＬｉｕＪｉｅ；ＣｈｅｎＭｉｎ－Ｑｉｎ（ＣｅｎｔｅｒｏｆＡｎａｌｙｓｉｓ＆Ｍｅａｓｕｒｅｍ...     

3，19－二羟基－1－硫杂－5，8，11，14，17－五氧杂环二十烷的醚化与缩聚反应

３，１９－二羟基－１－硫杂－５，８，１１，１４，１７－五氧杂环二十烷（简称二羟基硫杂２０－冠－６）在一缩二乙二醇二甲醚和氢化钠存在下可与卤代烷顺利地进行醚化反应，得到双己氧基、双十二烷氧基、双十六烷氧基、双节氧基和双烯丙氧基硫杂２０－冠－６，同时也得到了单己氧基、单十二烷氧基、单十六烷氧基和单辛氧基单羟基疏杂２０－冠－６副产物。二羟基硫杂冠醚可顺利地与丁二酰氯缩聚，得到主链含硫杂冠醚基团的聚酯     

自由基链式亲核取代反应(S_(RN)1)的进展

本文评述了自由基链式亲核取代反应的最近进展。内容包括:脂肪族化合物和芳香族化合物按S_(RN)l进行的反应及其机理。     

Preparation of flame retardant polyamide 6 composite with melamine cyanurate nanoparticles in situ formed in extrusion process

This paper is focused on in situ preparation of melamine cyanurate (MCA) nanoparticles from reaction of melamine (MEL) and cyanuric acid (CA) and their flame retardant polyamide 6 (PA6) composite in the extrusion process through a novel reactive processing method. Fourier transform infrared (FT-IR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM) were utilized to characterize the in situ formed MCA nanoparticles and their blends with PA6. Introduction of pentaerythritol (LTP) and water-bound plasticizer dioctyl phthalate (DPT) into the extrusion reaction system greatly inhibits the evaporation of water required for melamine and cyanuric acid reaction at high temperature (higher than 180 °C), laying a foundation for successful in situ preparation of MCA through reactive processing. XRD and FT-IR measurements indicate that under the effect of pentaerythritol, dioctyl phthalate and water, melamine really reacts with cyanuric acid to in situ form MCA in extrusion process. The reaction degree is close to 100%. A very important finding through SEM is that the in situ formed MCA particles, which were found to have aspect ratio of about 7.5, radial size in the range of 70-300 nm (mostly 70-90 nm) and crystallite size of less than 22 nm, are uniformly dispersed in the matrix PA6 at nanoscale. The in situ formed MCA nanoparticles greatly improve the flame retardancy and the mechanical properties of flame-retarded PA6 materials, and the introduced plasticizer dioctyl phthalate also ameliorates the related impact property. The obtained flame-retarded PA6 materials have good comprehensive performance with flame retardancy UL-94 V-0 rating at 1.6 and 3.2 mm thickness, tensile strength 48.0 MPa, elongation at break 106.3% and Izod notched impact strength 8.92 kJ/m². Compared with flame-retarded PA6 material with in situ formed MCA, the one prepared through conventional blending of PA6 with commercial MCA product has improved tensile strength but deteriorated impact strength and flame retardancy.     

Studies on the Spectral Behavior between Protein with Poniacyl Carmine 2B and its Analytical Application

In this paper, the spectral behavior of protein and Poniacyl Carmine 2B (PC 2B) has been studied by spectrophotometric method. The conditional constants, apparent combination constant K and maximum binding number n, were used to express the combination ability of the reactions between PC 2B and protein under a set of given conditions. The Sandell index s was used to express the sensitivity of the determination of protein. The factors, acidity, PC 2B concentration and the ionic strength, were discussed by the change of apparent combination constant and maximum binding number. It was found that acidity of the solution, PC 2B concentration and ionic strength had a significant effect on the sensitivity of the assay of protein. Under the optimal conditions, the apparent combination constant K and the maximum binding number n were 2.36 × 10⁶ L mol^?1 and 95, respectively. With further investigation, it was found that the Scatchard model was suitable in treating the data obtained in the experiments. In the buffer medium of HCl‐KCl at 1.87, the addition of protein made the maximum absorption of the system move from 527 nm to 513 nm. Its apparent molar absorptivity is 4.46 × 10⁵ Lmol^?1 cm^?1 at 513 nm. Beer's law is obeyed in the range of 0 ? 55 μg mL^?1. The system developed in this paper has been used for the determination of protein in milk powder successfully.     

Ru/Mn-Ce/TiO2催化剂催化湿式氧化丁二酸的反应活性和动力学研究

在二氧化钛载体中通过掺杂Ru，Mn，Ce制备了一系列用于催化湿式氧化的催化剂，利用XRD，TEM，BET等手段对催化剂进行了表征．在反应温度T=210～270℃，氧分压Po2=2．1MPa条件下，在间歇式高压反应釜中对丁二酸进行了降解实验．催化剂在反应中有很高的催化活性．催化剂在30min内对丁二酸降解的COD去除率为54．4～98．3％．Ru及Mn，Ce的氧化物对催化活性都有促进作用．建立了丁二酸催化湿式氧化的一级分段动力学模型．基于COD的一段及二段反应的活化能分别为43．74kJ／mol和54．28kJ／mol．     

Modified modeling of the effect of pH and viscosity on the mass transfer in hydrophobic hollow fiber membrane contactors

This paper studied the effect of pH and the viscosity of feed solution on the mass transfer in two different specifications of hydrophobic hollow fiber membrane contactors. Experimental results showed that the pH of the feed had a significant effect on the rate of mass transfer, the flux and the removal efficiency of easily ionized volatile compounds (VCs), such as ammonia. In unbuffered feed solutions, both the resistance of membrane and the resistance of feed side were affected by the pH of feed and both of them had contributions to the overall mass transfer. A model, , was proposed to predict the effect of pH and gave good agreement with the experimental data for the two contactors. The relationship between viscosities and the mass transfer coefficient could be described by . Based on our experiments, the change of the viscosities in the concentration range of ammonia from 50 to 10,000 mg l⁻¹ caused about 3–4% variation of the mass transfer coefficients. Moreover, it may be more suitable to use the equilibrium concentrations of volatile species instead of the total concentrations of VCs to estimate mass transfer coefficients, removal efficiency and flux. Experimental results also revealed that the choice of the pH of feed might be one of the most crucial factors for removing easily ionized VCs, such as ammonia, from water and wastewater.     

Fabrication of ultrathin films with large third-order nonlinear optical properties.

An ultrathin composite film containing anionic Ag-His complexes (His: L-Histidine) and oppositely charged BH-PPV was fabricated by means of the electrostatic layer-by-layer self-assembly technique. UV/Vis spectra showed a continuous deposition process of Ag-His complexes and BH-PPV. The film structure was characterized by using small-angle X-ray diffraction, AFM, and SEM. The nonlinear optical properties of the ultrathin film were studied by using the Z-scan technique with a laser duration of 8 ns at a wavelength of 532 nm. The film sample exhibited a strong nonlinear saturated absorption, with an alpha2 value of -3.9 x 10(-5) mW(-1) and a self-defocusing effect with an n2 value of -4.78 x 10 (-12) m2W(-1).