Comparisons of the vector method and tensor method for simulating liquid crystal devices

In calculating the director configuration in a liquid crystal device, two methods are commonly employed: a vector model and a tensor model. In this paper, we compare and contrast these methods for liquid crystal devices consisting of a layer of liquid crystal sandwiched between two plates. We compare the reliability and accuracy of the results, the speed of computation and the complexity of implementations of each method.     

Synthesis and biological evaluation of the osteoblast proliferating cyclic peptides dianthins G and H

The first synthesis and osteoblast proliferative activity of the naturally occurring cyclic peptides dianthins G and H is described. The greater potency of naturally occurring dianthin G over dianthin H at physiological concentrations mirrored the osteoblast proliferative activity observed for synthetic dianthins G and H. Six alanine-scan analogues of the more potent dianthin G were also synthesised and osteoblast assays revealed that four of the six residues can be further modified for improved activity. We also confirmed by variable temperature ¹H NMR spectroscopic analysis that the sets of major and minor signals observed for dianthins G and H in DMSO-d₆ are in fact due to cis–trans rotational isomers of the proline ring.     

Observation of B-->eta'K* and evidence for B+-->eta'rho+

We present an observation of B-->eta'K*. The data sample corresponds to 232x10(6) BB[over ] pairs collected with the BABAR detector at the PEP-II asymmetric-energy B factory at the Stanford Linear Accelerator Center. We measure the branching fractions (in units of 10(-6)) B(B(0)-->eta'K*0)=3.8+/-1.1+/-0.5 and B(B+-->eta'K*+)=4.9(1.7)(+1.9)+/-0.8, where the first error is statistical and the second systematic. A simultaneous fit results in the observation of B-->eta'K* with B(B-->eta'K*)=4.1(-0.9)(+1.0)+/-0.5. We also search for B-->eta'rho and eta'f(0)(980)(f(0)-->pi+pi-) with results and 90% confidence level upper limits B(B+-->eta'rho+)=8.7(-2.8-1.3)(+3.1+2.3) (<14), B(B(0)-->eta'rho0)<3.7, and B(B(0)-->eta'f(0)(980)(f(0)-->pi+pi-))<1.5. Charge asymmetries in the channels with significant yields are consistent with zero.     

Preparation and characterization of electrospun nanofiber-coated membrane separators for lithium-ion batteries

Nanofiber-coated membrane separators were prepared by electrospinning polyvinylidene fluoride-co-chlorotrifluoroethylene (PVDF-co-CTFE) nanofibers onto three different microporous membrane substrates. The nanofibers on the membrane substrates showed uniform morphology with average fiber diameters ranging from 129 to 134 nm. Electrolyte uptakes, ionic conductivities, and interfacial resistances were studied by soaking the nanofiber-coated membrane separators with a liquid electrolyte solution of 1 M lithium hexafluorophosphate in ethylene carbonate/dimethylcarbonate/ethylmethyl carbonate (1:1:1 by volume). Compared with uncoated membranes, nanofiber-coated membranes had greater electrolyte uptakes and lower interfacial resistances to the lithium electrode. It was also found that after soaking in the liquid electrolyte solution, nanofiber-coated membranes exhibited higher ionic conductivities than uncoated membranes. In addition, lithium-ion half cells containing nanofiber-coated membranes were evaluated with a LiFePO₄ cathode for charge–discharge capacities and cycle performance. The cells containing a nanofiber-coated separator membrane showed high discharge specific capacities and good cycling stability at room temperature. Results demonstrated that coating PVDF-co-CTFE nanofibers onto microporous membrane substrates is a promising approach to obtain new and high-performance separators for rechargeable lithium-ion batteries.     

Nickel‐Catalyzed Synthesis of Dialkyl Ketones from the Coupling of N‐Alkyl Pyridinium Salts with Activated Carboxylic Acids

While ketones are among the most versatile functional groups, their synthesis remains reliant upon reactive and low‐abundance starting materials. In contrast, amide formation is the most‐used bond‐construction method in medicinal chemistry because the chemistry is reliable and draws upon large and diverse substrate pools. A new method for the synthesis of ketones is presented here that draws from the same substrates used for amide bond synthesis: amines and carboxylic acids. A nickel terpyridine catalyst couples N‐alkyl pyridinium salts with in situ formed carboxylic acid fluorides or 2‐pyridyl esters under reducing conditions (Mn metal). The reaction has a broad scope, as demonstrated by the synthesis of 35 different ketones bearing a wide variety of functional groups with an average yield of 60±16 %. This approach is capable of coupling diverse substrates, including pharmaceutical intermediates, to rapidly form complex ketones.     

The Varietal Influence of Flavour Precursors from Grape Marc on Monoterpene and C13-Norisoprenoid Profiles in Wine as Determined by Membrane-Assisted Solvent Extraction (MASE) GC-MS

The winemaking by-product grape marc (syn. pomace) contains significant quantities of latent flavour in the form of flavour precursors which can be extracted and used to modulate the volatile composition of wine via chemical hydrolysis. Varietal differences in grapes are widely known with respect to their monoterpene content, and this work aimed to extend this knowledge into differences due to cultivar in volatiles derived from marc precursors following wine-like storage conditions. Marc extracts were produced from floral and non-floral grape lots on a laboratory-scale and from Muscat Gordo Blanco marc on a winery -scale, added to a base white wine for storage over five to six months, before being assessed using a newly developed membrane-assisted solvent extraction gas chromatography-mass spectrometry (GC-MS) method. The geraniol glucoside content of the marc extracts was higher than that of juices produced from each grape lot. In all wines with added marc extract from a floral variety, geraniol glucoside concentration increased by around 150–200%, with increases also observed for non-floral varieties. The relative volatile profile from extracts of the floral varieties was similar but had varied absolute concentrations. In summary, while varietally pure extracts would provide the greatest control over flavour outcomes when used in winemaking, aggregated marc parcels from floral cultivars may provide a mechanism to simplify the production logistics of latent flavour extracts for use in the wine sector.     

Improved estimation of PM2.5 brown carbon contributions to filter light attenuation

Multiwavelength light attenuation measurements have been acquired as part of thermal/optical carbon analysis in the U.S.Chemical Speciation Network(CSN)and the ...     

Enhancement of mass spectrometric detection of LTC4, LTD4, and LTE4 by derivatization

Several acylating reagents are synthesized and used to introduce quatemary phosphonium or ammonium or ternary sulfonium functions into a simple model of a peptido leukotriene (PLT). One of these reagents was selected for further study with LTE₄, LTD₄, and LTC₄. We demonstrate that acylation of the free amine function of PLTs to produce the 5-triphenylphosphoniumvaleryl-amide (TPPV) derivatives enhances chemical stabilities and significantly increases responses in fast-atom bombardment and continuous-flow liquid secondary ion mass spectrometry (CF-LSIMS) relative to the native PLTs. With high-performance liquid chromatography inlet to CF-LSIMS, we demonstrate the facile detection in selected ion monitoring of the TPPV derivative of 3 pg of LTD₄.     

高能核碰撞中带电多重数快度与能量和中心度的关系

用强子–弦级联模型JPCIAE及相应的Monte Carlo事例产生器研究相对论性核–核碰撞中带电粒子多重数的赝快度密度对能量和中心度的依赖关系.无需另调任何模型参数的条件下,此模型可以同时较好地描述相对论性pp实验数据及PHOBOS和PHENIX实验组的Au+Au实验数据.本文指出:因〈N_part〉并非严格定义的物理量,致使实验上和理论上确定〈N_part〉有一定任意性,从而使得每参加者核子对的带电粒子赝快度密度随着〈N_part〉的增加可能逐渐增大,也可能逐渐减小,因此用它来区分粒子产生机制是欠妥的.     

An efficient and scalable process to produce morpholine-d8

Incorporation of isotopes has long been used as a research tool to label carbons and elucidate biochemical pathways. More recently, H→D exchange has led to analogs of therapeutic agents with improved metabolic stability and properties. Such compounds also have the potential for an improved drug/drug interaction profile and may even avoid the formation of toxic metabolites. Hence, a clear need for an efficient access to deuterated intermediates on large scale has emerged. In the context of an ongoing drug discovery program, we required large quantities of morpholine-d₈. We herein report the successful optimization of a one-pot process allowing a near complete exchange of all methylene hydrogens in morpholine to deuterium atoms using D₂O as the sole source of deuterium and Raney Nickel as catalyst. This facile and safe protocol will be used to scale up the synthesis of morpholine-d₈ in due course.