Interrelation between inhomogeneity and cyclability in O3‐NaFe1/2Co1/2O2

O3‐NaFe_1/2Co_1/2O₂ shows initial capacity of 160 mAh/g and an average operating voltage of 3.1 V (vs. Na) with good cyclability, and is a promising candidate of the cathode materials for sodium‐ion secondary batteries (SIBs). Here, we found that the cyclability of the slowly‐cooled sample is much worse than that of quenched one, even though the former sample keeps the O3‐type structure. The energy dispersive X‐ray spectroscopy (EDX) images suggest that the slow‐cooled sample (Na_x Fe_1–yCo_y O₂) is inhomogeneous in the Fe concentration (1 – y), perhaps triggered by the Na deficiency (1 – x). We ascribed the poor cyclability in the slowly‐cooled sample to the concentration inhomogeneity (Δy). The Δy is further responsible for the fluctuation of the lattice constants (a and c), as revealed by the Williamson–Hall plot. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Visualization of high-order dispersion for compression of few-cycle pulses

We present a visually intuitive method for higher-order dispersion compensation based on multi-photon interpulse interference pulse scans. The dispersion values obtained from these scans are fed back as a correction to an acousto-optical programmable dispersive filter to compensate residual higher-order dispersions up to fifth order. This method is applied to the dispersion management of a non-collinear optical parametric chirped-pulse amplifier. A grism-pair stretcher is designed based on a global dispersion balance which provides a large stretching factor and supports a spectral bandwidth of up to 320 nm. It is implemented in a two-stage three-pass non-collinear optical parametric chirped-pulse amplifier and stretches 6-fs seed pulses to about 80 ps from 700 to 1,000 nm. The amplified pulses are compressed by material dispersion. Pulses of less than 10-fs duration with a pulse energy of 125 μJ are obtained at 20-kHz repetition rate.     

Intramolecular σ-bond metathesis between carbon-carbon and silicon-silicon bonds

An intramolecular σ-bond metathesis between carbon-carbon and silicon-silicon bonds took place on treatment of a disilane tethered to a cyclobutanone with a palladium(0) catalyst, furnishing a silaindane skeleton as well as an acylsilane functionality at once.     

Organotin-catalyzed highly regioselective thiocarbonylation of nonprotected carbohydrates and synthesis of deoxy carbohydrates in a minimum number of steps

Nonprotected carbohydrates: The catalytic regioselective thiocarbonylation of carbohydrates by using organotin dichloride under mild conditions was demonstrated. The reaction afforded various deoxy saccharides in high yields and excellent regioselectivity in a minimum number of steps. The regioselectivity of the thiocarbonylation is attributed to the intrinsic character of the carbohydrates based on the stereorelationship of their hydroxy groups (see scheme).     

Evidence of Nonelectrochemical Shift Reaction on a CO-Tolerant High-Entropy State Pt-Ru Anode Catalyst for Reliable and Efficient Residential Fuel Cell Systems

A randomly mixed monodispersed nanosized Pt-Ru catalyst, an ultimate catalyst for CO oxidation reaction, was prepared by the rapid quenching method. The mechanism of CO oxidation reaction on the Pt-Ru anode catalyst was elucidated by investigating the relation between the rate of CO oxidation reaction and the current density. The rate of CO oxidation reaction increased with an increase in unoccupied sites kinetically formed by hydrogen oxidation reaction, and the rate was independent of anode potential. Results of extended X-ray absorption fine structure spectroscopy showed the combination of N(Pt-Ru)/(N(Pt-Ru) + N(Pt-Pt)) ? M(Ru)/(M(Pt) + M(Ru)) and N(Ru-Pt)/(N(Ru-Pt) + N(Ru-Ru)) ? M(Pt)/(M(Ru) + M(Pt)), where N(Pt-Ru)(N(Ru-Pt)), N(Pt-Pt)(N(Ru-Ru)), M(Pt), and M(Ru) are the coordination numbers from Pt(Ru) to Ru(Pt) and Pt (Ru) to Pt (Ru) and the molar ratios of Pt and Ru, respectively. This indicates that Pt and Ru were mixed with a completely random distribution. A high-entropy state of dispersion of Pt and Ru could be maintained by rapid quenching from a high temperature. It is concluded that a nonelectrochemical shift reaction on a randomly mixed Pt-Ru catalyst is important to enhance the efficiency of residential fuel cell systems under operation conditions.     

Parallel factor (PARAFAC) kernel analysis of temperature- and composition-dependent NMR spectra of poly(lactic acid) nanocomposites

The parallel factor (PARAFAC) kernel matrix to analyze a sample system stimulated by more than one type of perturbation is described. PARAFAC kernel is a quantitative representation of the synchronicity and asynchronicity observed within the PARAFAC score matrices generated by carrying out two-dimensional (2D) correlation analyses. Thus, kernel matrix representation provides more intuitively understandable interpretation to the conventional PARAFAC trilinear model. In this study, the utility of PARAFAC kernel is demonstrated by the study of poly(lactic acid)-nanocomposite undergoing a structural change depending on the temperature as well as the clay content in the sample. Seemingly complicated variation of nuclear magnetic resonance (NMR) spectra induced by the change in the temperature and clay content are readily analyzed by the multiple-perturbation 2D correlation spectroscopy and PARAFAC kernel. PARAFAC kernel revealed that crystalline and amorphous structures of the PLA substantially undergo thermal deformation, and these variations are also influenced by the presence of the clay.     

Molecular Ionics in Supramolecular Assemblies with Channel Structures Containing Lithium Ions

A novel trilithium compound, Li₃[B(C₆H₄O₂){O(CH₂CH₂O)₃CH₃}₂][N(SO₂CF₃)₂]₂ ( 1 ‐2.0), with solid‐state ionic conductivity was synthesized. The crystal structure of 1 ‐2.0 consists of the one‐dimensional ionic conduction paths. The paths were afforded as a result of the self‐assembled stacking of the component molecules of 1 ‐2.0 with channel structures containing lithium ions. In this supramolecule, one lithium ion holds the component molecules in specific positions to construct a supramolecular structure with thermally stable ionic conduction paths and the others behave as carrier ions exhibiting selective lithium‐ion conductivity. Owing to the existence of both roles for the lithium ions, this electrolyte shows selective lithium‐ion conductivity.     

Inclusion and dielectric properties of a vinylidene fluoride oligomer in coordination nanochannels

The dynamics of oligo(vinylidene fluoride) (OVDF) confined in regular nanochannels of a porous coordination polymer (PCP) was studied by means of dielectric spectroscopy. The OVDF chains in the PCP nanopores showed two Arrhenius-type relaxation processes at lower temperatures than the relaxation temperature observed for the neat OVDF, showing the enhanced mobility of the confined OVDF.     

Creation of high-refractive-index amorphous titanium oxide thin films from low-fractal-dimension polymeric precursors synthesized by a sol-gel technique with a hydrazine monohydrochloride catalyst

Amorphous titanium dioxide (TiO(2)) thin films exhibiting high refractive indices (n ≈ 2.1) and high transparency were fabricated by spin-coating titanium oxide liquid precursors having a weakly branched polymeric structure. The precursor solution was prepared from titanium tetra-n-butoxide (TTBO) via the catalytic sol-gel process with hydrazine monohydrochloride used as a salt catalyst, which serves as a conjugate acid-base pair catalyst. Our unique catalytic sol-gel technique accelerated the overall polycondensation reaction of partially hydrolyzed alkoxides, which facilitated the formation of liner polymer-like titanium oxide aggregates having a low fractal dimension of ca. (5)/(3), known as a characteristic of the so-called "expanded polymer chain". Such linear polymeric features are essential to the production of highly dense amorphous TiO(2) thin films; mutual interpenetration of the linear polymeric aggregates avoided the creation of void space that is often generated by the densification of high-fractal-dimension (particle-like) aggregates produced in a conventional sol-gel process. The mesh size of the titanium oxide polymers can be tuned either by water concentration or the reaction time, and the smaller mesh size in the liquid precursor led to a higher n value of the solid thin film, thanks to its higher local electron density. The reaction that required no addition of organic ligand to stabilize titanium alkoxides was advantageous to overcoming issues from organic residues such as coloration. The dense amorphous film structure suppressed light scattering loss owing to its extremely smooth surface and the absence of inhomogeneous grains or particles. Furthermore, the fabrication can be accomplished at a low heating temperature of <80 °C. Indeed, we successfully obtained a transparent film with a high refractive index of n = 2.064 (at λ = 633 nm) on a low-heat-resistance plastic, poly(methyl methacrylate), at 60 °C. The result offers an efficient route to high-refractive-index amorphous TiO(2) films as well as base materials for a wider range of applications.