1,1-bis(trimethylsilyl)-1-alkanols as silylcarbene equivalent

Silylcarbenes are generated by the pyrolysis of 1,1-bis(trimethylsilyl)-1-alkanols with elimination of trimethylsilanol.     

Temperature and Oxygen Partial Pressure Dependences of the Surface Tension of Liquid Sn–Ag and Sn–Cu Lead-free Solder Alloys

Temperature dependence of the surface tension of liquid Sn–Ag and Sn–Cu base lead-free solder alloys and oxygen partial pressure dependence of liquid Sn–Ag alloy were evaluated using the experimental data obtained, respectively, by the constrained drop method and the sessile drop method in the previous studies [1, 2]. The temperature dependences of the surface tension have maximum positive values when the mol fraction of Ag and Cu is about 0.7, while those for pure liquid Sn, Ag, and Cu have negative values. The calculated values based on Butler’s equations were found to be in reasonable agreement with those of the experimental data. The oxygen partial pressure dependences of the surface tension of liquid Sn–Ag alloys at 1253 K have a minimum value when the mol fraction of Ag is about 0.9 and the oxygen partial pressure is less than about 10⁻¹³ atm. From this, it is considered that the oxygen adsorption increased by adding Ag to Sn when the mol fraction of Ag is less than 0.9.     

An economical approach for peptide synthesis via regioselective C–N bond cleavage of lactams

An economical, solvent-free, and metal-free method for peptide synthesis via C–N bond cleavage using lactams has been developed. The method not only eliminates the need for condensation agents and their auxiliaries, which are essential for conventional peptide synthesis, but also exhibits high atom economy. The reaction is versatile because it can tolerate side chains bearing a range of functional groups, affording up to >99% yields of the corresponding peptides without racemisation or polymerisation. Moreover, the developed strategy enables peptide segment coupling, providing access to a hexapeptide that occurs as a repeat sequence in spider silk proteins.

An economical, solvent-free, and metal-free method for peptide synthesis via C–N bond cleavage using lactams has been developed.     

Interrelation between inhomogeneity and cyclability in O3‐NaFe1/2Co1/2O2

O3‐NaFe_1/2Co_1/2O₂ shows initial capacity of 160 mAh/g and an average operating voltage of 3.1 V (vs. Na) with good cyclability, and is a promising candidate of the cathode materials for sodium‐ion secondary batteries (SIBs). Here, we found that the cyclability of the slowly‐cooled sample is much worse than that of quenched one, even though the former sample keeps the O3‐type structure. The energy dispersive X‐ray spectroscopy (EDX) images suggest that the slow‐cooled sample (Na_x Fe_1–yCo_y O₂) is inhomogeneous in the Fe concentration (1 – y), perhaps triggered by the Na deficiency (1 – x). We ascribed the poor cyclability in the slowly‐cooled sample to the concentration inhomogeneity (Δy). The Δy is further responsible for the fluctuation of the lattice constants (a and c), as revealed by the Williamson–Hall plot. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Observation of vacuum-ultraviolet Ar2* radiation gain at 126 nm produced by an ultrashort high-intensity laser pulse propagating in a hollow fiber

We observed a small-signal gain of Ar2* emission at 126 nm by use of a hollow fiber to guide the high-intensity laser propagation in high-pressure Ar. The small-signal gain coefficient was measured to be 0.05 cm(-1) at 126 nm. Kinetic analysis revealed that the electrons produced by the high-intensity laser through an optical-field-induced ionization process initiated the Ar2* production processes. The increase in the emission intensity was measured to be exp(2.5), with an increase in the fiber length.     

<Emphasis Type="Italic">In Situ</Emphasis> Synthesis of Field-responsive Nanocrystalline BaTiO<Subscript>3</Subscript> Particles Modified with Functional Organics

Nanocrystalline BaTiO₃ particles modified with polarizable ligands were synthesized through hydrolysis of modified metal–organics below 100°C. BaTiO₃ precursor was synthesized from barium metal, titanium isopropoxide and polarizable ligands in a mixture of ethanol and 2-ethoxyethanol. The modified Ba–Ti complex alkoxide was hydrolyzed yielding BaTiO₃ particles modified with organics. The crystallinty of nanometer-sized particles was dependent upon the hydrolysis conditions, and increased with increasing water amount and time. The nanocrystalline particles were identified to be BaTiO₃ by X-ray diffraction (XRD) and electron diffraction. A fluid consisting of modified BaTiO₃ particles and silicone oil revealed a typical electrorheological (ER) behavior on applying DC field. The ER behavior was found to depend upon the kind of ligand. 4-Fluorobenzyloxy modifier revealed the highest yield stress in the ER measurement among 4-substitued benzyloxy ligands examined.     

Phase transition in Pd40Ni10Cu30P20 bulk metallic glass under HP & HT

The phase transitions in Pd40Ni10Cu30P20 bulk metallic glass (BMG) have been studied under high pressure and high temperature (HP & HT) by X-ray diffraction measurements with synchrotron radiation source. We found that the BMG underwent a phase transitions of amorphous-crystalline-amorphous at 10 GPa upon heating. The parallel experiments were carried out at 7 GPa, while we did not observe the amorphous-crystalline-amorphous transitions by increasing temperature. Quenching the melted BMG at 7 GPa, it was found that the phase crystallized from the melt differed from the primary phase crystallized from the starting amorphous solid upon heating, suggesting there existed a distinct mechanism in two cases.     

Development of Non-Halogen Flame Retardant Optical Fiber and Optical Fiber Cord

A non-halogen highly flame-retardant 0.9mm optical fiber and 2.0mm simplex optical cord, which are harmonized with the ecosystem, have been developed. The characteristics of them are presented in this paper.