Synthesis and Studies of Fluorescein Based Derivatives for their Optical Properties,Urease Inhibition and Molecular Docking

Herein, we design and synthesized new fluorescein based derivatives by insitu formation of fluorescein ester and further treated with corresponding hydrazide and amine to yield respective compounds i.e. FB1, FB2, FB3 and FB4. The spectral purity and characterization was done by using IR, NMR and Mass spectroscopies. The synthesized derivatives were examined for their photophysical properties by using variety of organic solvents and results were discussed in details. The structural diversity of synthesized compounds motivate us to evaluate these compounds for urease inhibition. The compound FB3 (IC₅₀?=?0.0456 μM) shows 100 fold more active against Jack bean urease than standard drug thiourea (IC₅₀?=?4.7455 μM). Other synthesized compounds showed potent activity. Free radical percentage scavenging assay further supported the capacity of compounds to urease inhibition. While, molecular docking simulations helps to examine the molecular interactions of active compounds FB1, FB2, FB3 and FB4 within the binding site of urease enzyme.     

Phase switching and quantum interference in a 3-level Λ-shape bistable model

The steady state bistable behaviour of a three-level Λ-shape is examined in the presence of a control field $({\rm \Omega} +\chi \left( t\right) e^{i\varphi})$({\rm \Omega} +\chi \left( t\right) e^{i\varphi}) : Ω is the strong Rabi component, $\chi \left( t\right) $\chi \left( t\right) is the stochastic part with relative phase ϕ; with quantum interference between decay channels taken into account. One- and two-way phase switching effect for the transmitted field against the phase are predicted at fixed values for the incident input field. Also cooperative switching effect shows multistable/bistable behaviour. Quantum interference tends to diminish the dispersive effects responsible for multistable behaviour (in the input-output relation and the cooperative switching diagram) and asymmetry (in the phase switching diagram). Equivalence of the role of the stochastic part of the control field with that of the “classically” squeezed field is shown to occur only in the absence of quantum interference.     

Evaluation and comparison of three novel microbubbles: Enhancement of ultrasound-induced cell death and free radicals production

Three novel lipid-shell-type microbubbles (MBs), AS-0100, BG6356A and BG6356B, have been evaluated for their impact on ultrasound (US)-induced cell death and free radicals production. Previously studied and well-characterized US exposure conditions were employed in which human myelomonocytic lymphoma U937 cells were exposed to 1 MHz pulsed US beam (0.3 W/cm², 10% duty factor) for 1 min with or without MBs. Three different concentrations of each MB were used. Apoptosis and cell lysis were assessed by examining phosphatidylserine externalization and by counting viable cells, respectively, 6 h post-exposure. Free radicals production and scavenging activities were evaluated using electron paramagnetic resonance (EPR)-spin trapping. The results showed that only AS-0100 and BG6356A were able to enhance the US-induced apoptosis, mainly by increasing the secondary necrosis. Apoptosis and cell lysis seemed to depend more on mechanical forces exerted by oscillating MBs while free radicals played a trivial role. BG series MBs exhibited pronounced scavenging activities. Generally, despite the need for further optimization, AS-0100 and BG6356A appear to be promising as adjuncts in cases where US-induced cell death is required.     

Temperature dependence of turn-on time delay of semiconductor laser diode: Theoretical analysis

Temperature dependence of the turn-on time delay (t_on) of uncooled semiconductor laser diodes biased below and above threshold is analyzed in presence of data pattern effect. We show that even when the laser is biased at or slightly above threshold, the increase in temperature of operation will lead to increase in the threshold carrier (N_th) and consequently the laser diode will be biased below the threshold again and a significant value of t_on will be produced. Thus, knowledge about a value of dc-bias current required to achieve zero t_on within wide range of temperature degrees is important when considering uncooled laser diode in high-speed optical communication systems. The temperature dependence of t_on is calculated according to the temperature dependence of N_th and Auger recombination coefficient (C) and not by the well-know exponentional relationship of threshold current with temperature. The temperature dependence of N_th is calculated according to the temperature dependence of laser cavity parameters. Advanced analytical model is derived in term of carrier density, recombination coefficients and the injection current (I_inj). The validity of proposed model is confirmed by a numerical method. In addition, approximated models are included where under specified assumptions the proposed model reduces to the well-known approximate models of t_on. According to our typical values and at a specified value of modulation current, the dc-bias one (I_ib) should be increased from I_ib = I_th to I_ib ≈ 1.25 and 1.5I_th in order to achieve approximately zero t_on when the temperature increases from 25°C to 55°C and 85°C, respectively.     

Perfect quantum excitation energy transport via single edge perturbation in a complete network

We consider quantum excitation energy transport (EET) in a network of two-state nodes in the Markovian approximation by employing the Lindblad formulation. We find that EET from an initial site, where the excitation is inserted to the sink, is generally inefficient due to the inhibition of transport by localization of the excitation wave packet in a symmetric, fully-connected network. We demonstrate that the EET efficiency can be significantly increased up to ≈100% by perturbing hopping transport between the initial node and the one connected directly to the sink, while the rate of energy transport is highest at a finite value of the hopping parameter. We also show that prohibiting hopping between the other nodes which are not directly linked to the sink does not improve the efficiency. We show that external dephasing noise in the network plays a constructive role for EET in the presence of localization in the network, while in the absence of localization it reduces the efficiency of EET. We also consider the influence of off-diagonal disorder in the hopping parameters of the network.     

A Review on Effects of Lubricant Formulations on Tribological Performance and Boundary Lubrication Mechanisms of Non-Doped DLC/DLC Contacts

Tribological efficiency of industrial applications involving boundary lubrication regime can be improved to an appreciable extent by the deposition of hard coatings on interacting surfaces. Among such coatings, diamond-like carbon (DLC) coatings are considered to be one of the most suitable ones for the said role. DLC coatings possess a unique combination of physical, chemical, and material properties due to which they can help in minimizing friction-induced energy and material losses even under starved lubrication conditions. Since commercial lubricants are optimized for steel surfaces, therefore, a lot of experimental investigations were carried out to analyze the tribological compatibility of these lubricants with various DLC coatings. However, there is still a lack of understanding about how DLC coatings interact with conventional lubricant additives. Some researchers reported tribologically beneficial interactions between DLC coatings and formulated lubricants while others observed no such behavior. To address these inconsistencies, there is a need to rearrange the published data in a more apprehensible and organized manner with a special emphasis on the mechanisms responsible for a particular tribological behavior. In this way, it can be determined whether synergistic or antagonistic correlation exists between a particular DLC-lubricant combination and research on DLC coatings can be continued in a logical way. In this article, most widely investigated non-doped DLC coatings (ta-C, a-C:H, a-C, and ta-C:H) are tribologically analyzed. Average values of friction and wear coefficients are calculated for various DLC-lubricant combinations using already published data and compared to quantify the effectiveness of a particular lubricant additive in enhancing tribological characteristics of symmetrical non-doped DLC contacts. Moreover, tribological performance parameters of non-doped DLC coatings are compared with those of doped-DLC coatings to understand differences in their tribological behavior in combination with additives.     

Line Profile Measure as a Stopping Criterion in CG-SENSE Algorithm

Conjugate gradient SENSE (CG-SENSE) is a parallel magnetic resonance imaging reconstruction algorithm which solves the inversion problem of SENSE iteratively. One major limitation of CG-SENSE is the appropriate choice of the number of iterations required for good reconstruction results. Fewer iterations result in aliasing artifacts and too many iterations result in an increased noise level. This paper proposes a novel method to define the stopping criterion of CG-SENSE algorithm which is based on the use of correlation measure between the line profiles of the reconstructed images in the current and the previous iterations. The results are compared with Bregman distance-stopping criterion. Artifact power and peak signal-to-noise ratio are used to quantify the quality of the reconstructed images. The results demonstrate that the line profile correlation measure acts as an effective stopping criterion in CG-SENSE.     

1H and C-13 Nuclear Magnetic Resonance of Tiaprofenic Acid

¹H-NMR spectrum of tiaprofenic acid in CDCI3 was obtained and proton chemical shifts from tetramethylsilane were assigned to each proton and set of equivalent protons of the molecule. The hydroxy proton of the carboxylic acid group was confirmed by deuterium exchange. The natural abundance C-13 nuclear magnetic resonance spectrum of the compound in CDCI3 was recorded using Fourier transorm technique. The chemical shifts of carbon resonances have been assigned on the basis of the chemical shift additivity theory and the signal multiplicity observed in the single frequency off-resonance decoupled (SFORD) spectrum. Also comparison with carbon chemical shifts of model compounds were useful.     

Spectrophotometric Determination of Pyrithioxin in Pharmaceutical Preparations

Rapid direct and induced difference spectrophotometric methods for determination of pyrithioxin in single dosage forms (tablets and syrups) are reported. The direct methods depend upon measurement of the absorbance of pyrithioxin in different media at λ_max i-e at 296 nm in 0.1 M hydrochloric acid, at 328 nm in citric acid-phosphate buffer of pH 7 and at 314 nm in 0.1 M sodium hydroxide. The mean percentage recovery of the authentic samples were 100.55±0.43, 101.21±0.58 and 100.29±0.64 respectively (P=0.05). The absorbance difference methods are based upon either measurement of the difference between the acid and the alkaline solutions i-e. Δ A (Alk-Acid) at 318 nm with an accuracy of 100.72±0.88 or the absorbance difference between the acid and neutral solutions i-e Δ A (pH 7-acid) at 328 nm with an accuracy of 100.31±0.68.     

Temperature dependence of the hyperfine fields of 111In in sapphire (Al2O3) single crystals

Cr has been added to FeCo substituting 10 at.% of Co or Fe in the alloy. The alloys Fe₅₀Co₄₀Cr₁₀, Fe₄₀Co₅₀Cr₁₀ and Fe₅₀Co₅₀ were prepared by mechanical alloying for 2, 5, 10, 20, 40 and 60 h. The formation of the alloy and the incorporation of the elements have been followed by X-Ray Diffraction (XRD) and Mössbauer Spectroscopy. The kinetics of mixing occurs by incorporation of Co and Cr into the Fe structure. After prolonged milling it seems that Cr incorporates itself into both $\upalpha $ -Fe and $\upalpha $ -FeCo structures and a mixture of FeCoCr rich in Cr and FeCoCr rich in Co solid solutions is obtained.