Photobleaching of Arterial Fluorescent Compounds: Characterization of Elastin, Collagen and Cholesterol Time-resolved Spectra during Prolonged Ultraviolet Irradiation

To study the photobleaching of the main fluorescent compounds of the arterial wall, we repeatedly measured the time-resolved fluorescence of elastin, collagen and cholesterol during 560 s of excitation with nitrogen laser pulses. Three fluence rate levels were used: 0.72, 7.25 and 21.75 microW/mm2. The irradiation-related changes of the fluorescence intensity and of the time-resolved fluorescence decay constants were characterized for the emission at 390, 430 and 470 nm. The fluorescence intensity at 390 nm decreased by 25-35% when the fluence delivered was 4 mJ/mm2, a common value in fluorescence studies of the arterial wall. Cholesterol fluorescence photobleached the most, and elastin fluorescence photobleached the least. Photobleaching was most intense at 390 nm and least intense at 470 nm such that the emission spectra of the three compounds were markedly distorted by photobleaching. The time-resolved decay constants and the fluorescence lifetime were not altered by irradiation when the fluence was below 4 mJ/mm2. The spectral distortions associated with photobleaching complicate the interpretation of arterial wall fluorescence in terms of tissue content in elastin, collagen and cholesterol. Use of the time-dependent features of the emission that are not altered by photobleaching should increase the accuracy of arterial wall analysis by fluorescence spectroscopy.     

The glass-to-gel transition in solvent-swollen polystyrene networks

Glass transition temperatures have been determined for polystyrenes crosslinked with 1–10% divinylbenzene and swollen with toluene, chloroform, N,N-dimethylformamide, and tetrahydrofuran to as high as 0.7 weight fraction solvent. The T_g′s depend approximately on the weight fractions and the T_g′s of the components according to the empirical equation 1nT_g = m₁ 1nT_g1 + m₂ 1nT_g2 of Pochan. The T_g′s of the networks swollen with toluene also fit approximately a quasithermodynamic equation of Karasz based on the T_g′s and the ΔC_p′s at T_g of the components.     

ALKALINE QUENCHING OF BACTERIORHODOPSIN TRYPTOPHANYL FLUORESCENCE: EVIDENCE FOR AQUEOUS ACCESSIBILITY OR A HYDROGEN-BONDED CHAIN

Abstract— Comparison between Trp fluorescence yields of membrane-bound bacteriorhodopsin (BR) and retinylidene-free bacterioopsin (BO) is consistent with a model in which all eight Trp residues are active fiuorophores in the latter, while the emission of all but two residues in the former is lost by energy transfer to retinal. The visible chromophore of BR is progressively bleached with increasing pH. Up to pH 12 this bleaching is reversed on reneutralization; but above this the change is irreversible with the appearance of a new absorption band characteristic of free retinal. Emission yields for both proteins decrease with increasingly alkaline pH in a manner typical of energy transfer to weakly-fluorescent tyrosinate. The limiting yields, reached at a pH corresponding to that producing irreversible bleaching of the visible chromophore, agree with an integral value of one remaining active Trp fluorophore in BR and between one and two in BO and show that the bulk of Trp are within the 11 Å Förster energy-transfer distance of Tyr accessible to OH⁻. Current models of the native protein structure of BR arrange the polypeptide chain primarily in a bundle of seven helical segments with axes perpendicular to the lipid bilayer plane and with buried polar residues, including Trp and Tyr, located at intrahelical surfaces. An interpretation of the observed accessibility of buried Tyr to OH⁻ is that an aqueous region exists within the protein structure. Moreover, this putative aqueous region must be close to the retinylidene chromophore and thus may be associated with the light-driven ion transport system. The results are also compatible with energy transfer to internal Tyr residues which are connected via a chain of phenolate hydrogen bonds to a surface Tyr.     

Investigation of colloidal graphite as a matrix for matrix‐assisted laser desorption/ionisation mass spectrometry of low molecular weight analytes

The analysis of low molecular weight compounds by matrix‐assisted laser desorption/ionisation mass spectrometry is problematic due to the interference and suppression of analyte ionisation by the matrices typically employed – which are themselves low molecular weight compounds. The application of colloidal graphite is demonstrated here as an easy to use matrix that can promote the ionisation of a wide range of analytes including low molecular weight organic compounds, complex natural products and inorganic complexes. Analyte ionisation with colloidal graphite is compared with traditional organic matrices along with various other sources of graphite (e.g. graphite rods and charcoal pencils). Factors such as ease of application, spectra reproducibility, spot longevity, spot‐to‐spot reproducibility and spot homogeneity (through single spot imaging) are explored. For some analytes, considerable matrix suppression effects are observed resulting in spectra completely devoid of matrix ions. We also report the observation of radical molecular ions [M^–●] in the negative ion mode, particularly with some aromatic analytes. Copyright © 2016 John Wiley & Sons, Ltd.     

Polymicrobial Biofilm Inhibition Effects of Acetate‐Buffered Chitosan Sponge Delivery Device

Polymicrobial biofilm‐associated implant infections present a challenging clinical problem. Through modifications of lyophilized chitosan sponges, degradable drug delivery devices for antibiotic solution have been fabricated for prevention and treatment of contaminated musculoskeletal wounds. Elution of amikacin, vancomycin, or a combination of both follows a burst release pattern with vancomycin released above minimum inhibitory concentration for Staphylococcus aureus for 72 h and amikacin released above inhibitory concentrations for Pseudomonas aeruginosa for 3 h. Delivery of a vancomycin, amikacin, or a combination of both reduces biofilm formation on polytetrafluoroethylene catheters in an in vivo model of contamination. Release of dual antibiotics from sponges is more effective at preventing biofilm formation than single‐loaded chitosan sponges. Treatment of pre‐formed biofilm with high‐dose antibiotic release from chitosan sponges shows minimal reduction after 48 h. These results demonstrate infection‐preventive efficacy for antibiotic‐loaded sponges, as well as the need for modifications in the development of advanced materials to enhance treatment efficacy in removing established biofilm.

     

Metal and cofactor insertion

Cells require metal ions as cofactors for the assembly of metalloproteins. Principally one has to distinguish between metal ions that are directly incorporated into their cognate sites on proteins and those metal ions that have to become part of prosthetic groups, cofactors or complexes prior to insertion of theses moieties into target proteins. Molybdenum is only active as part of the molybdenum cofactor, iron can be part of diverse Fe-S clusters or of the heme group, while copper ions are directly delivered to their targets. We will focus in greater detail on molybdenum metabolism because molybdenum metabolism is a good example for demonstrating the role and the network of metals in metabolism: each of the three steps in the pathway of molybdenum cofactor formation depends on a different metal (iron, copper, molybdenum) and also the enzymes finally harbouring the molybdenum cofactor need additional metal-containing groups to function (iron sulfur-clusters, heme-iron).     

Two-Photon Excitation of 4'-Hydroxymethyl-4,5',8-Trimethylpsoralen

Abstract— Psoralens are a class of pharmaceutical agents commonly used to treat several cutaneous disorders. When irradiated with a mode-locked titanium: sapphire (Ti: sapphire) laser tuned to 730 nm, an aqueous solution of 4'-hydroxymethyl-4,5',8-trimethylpsoralen (HMT) emits blue light. The emission spectrum is centered at 452 nm and is identical to that obtained by one-photon excitation with UVA excitation, and its magnitude depends quad-ratically on the intensity of laser excitation. These results suggest that two-photon excitation occurs to a potentially photochemically active state. To estimate the two-photon absorption cross section, it was first necessary to measure the emission quantum yield of HMT using 365 nm excitation at room temperature that resulted in a value of 0.045 ± 0.007. The two-photon absorption cross section of HMT at 730 nm is therefore estimated to be 20 ± 10⁻⁵⁰ cm⁴ s (20 Göppert-Mayer). The excited-state photophysics and photochemistry of psoralens suggest potential applications to cutaneous phototherapy in diseases such as psoriasis and dystrophic epidermolysis bullosa.     

The S.M.A.R.T. (small mass,affordable, rapid,transfer-less) digestion method for heavy metal determinations

The S.M.A.R.T. (small mass, affordable, rapid, transfer-less) digestion method was developed to determine heavy metal concentrations in small sample masses. The S.M.A.R.T. digestion method is a hot water bath digestion where sample digestion and dilution are performed in the original sample tube. This method is faster than the typical methods used and reduces potential sources of error. Masses as small as 0.01 g have been digested and analysed using this method. The preparation and digestion time is reduced from 10 h to less than 4 h. Acid volumes are reduced from millilitres to microlitres and the only disposable supplies needed are sample tubes and pipette tips. Method accuracy was determined by digesting seven replicates of two standard reference materials using the S.M.A.R.T. method and analysing samples by inductively coupled plasma mass spectrometry. The S.M.A.R.T. digestion method was found to provide excellent recoveries for Al (76 ± 2.7%), Mn (99 ± 11%), Co (92 ± 17%), Ni (93 ± 28%), Cu (109 ± 33%), Zn (97 ± 7.1%), As (108 ± 20%), Sr (90 ± 12%), Mo (84 ± 23%), Ag (91 ± 1.8%), Cd (95 ± 6.2%), Sn (139 ± 52%) and Pb (95 ± 22%). This study has successfully developed an efficient and reproducible digestion method for heavy metal determination in limited biomass samples.