应用分子图形学、分子力学、量子化学及静电势研究农药分子结构与性能关系(X)──磺酰脲分子内旋转通道的分子力学研究

磺酞豚分子是一类极其重要的低毒超高效除草剂，有着十分重要的用途．研究分子的空间结构对于了解分子的构效关系十分重要．最近，我们测定的一系列分子的晶体结构［‘－’1表明，分子1、2、3晶体结构的空间群分别为PZ；儿、Pz、Pz，说明晶体中分别有对称元素（对称面或者对称中心），分子以对映体的形式存在于晶体中．由于磺酸豚分子本身不存在手性原子，由此推断磺酷服分子在晶体中存在的对映异构体是由内旋转阻碍产生的，因而应是构象异构体．本项研究工作的目的是应用分子力学方法，计算阻碍内旋转的能垒，从而找出分子内旋转时的最低…     

Thermal decomposition of the composite hydrotalcites of iowaite and woodallite

The thermal stability and thermal decomposition pathways for synthesized composite iowaite/woodallite have been determined using thermogravimetry analysis in conjunction with evolved gas mass spectrometry. Dehydration of the hydrotalcites occurred over a range of 56–70°C. The first dehydroxylation step occurred at around 255°C and, with the substitution of more iron(III) for chromium(III) this temperature increased to an upper limit of 312°C. This trend was observed throughout all decomposition steps. The release of carbonate ions as carbon dioxide gas initialised at just above 300°C and was always accompanied by loss of hydroxyl units as water molecules. The initial loss of the anion in this case the chloride ion was consistently observed to occur at about 450°C with final traces evolved at 535 to 780°C depending of the Fe:Cr ratio and was detected as HCl (m/z=36). Thus for this to occur, hydroxyl units must have been retained in the structure at temperatures upwards of 750°C. Experimentally it was found difficult to keep CO₂ from reacting with the compounds and in this way the synthesized iowaite-woodallite series somewhat resembled the natural minerals.     

A Two-dimensional Lanthanide Coordination Framework with a New Amide-type Tripodal Ligand, 2,2′,2＂-Nitrilotris{[（2′- benzylaminoformyl）phenoxy]ethyl}amine

The La(III) complex with a new amide‐type tripodal ligand,2,2′.2″‐nitrilotris{[(2′‐benzylaminofomyl)‐phenoxylethyl)amine (L), was synthesized and characterized by X‐ray crystallographic analysis. Crystal data: C₄₈H_55.50LaN₇O_18.75, M_r=1169.40, monoclinic. space group, P2₁/n, a= 1.0644(3) nm. b=2.3889(5) nm, c= 2.1917(5) nm, β=90.65°, V=5.573(2) nm³, Z=1, D_c=1.394 g°cm^?3, R₁=0.0487, wR [1>2s?(I)]=0.1266. The results reveal that each La(III) ion binds to 9 oxygen atoms, three of which belong to carbonyl groups from three tripodal ligands and six to three bidentate nitrate groups and a two‐dimensional sheet of 4.8² networks is assembled by metal‐ligand coordination interaction. L, a heptadentate compound, merely acts as a tridentate bridging spacer due to its steric hindrance and links the La(III) ions as three‐connected nodes.     

毛细管离子交换电色谱的分离行为

在离子交换毛细管色谱柱上实施电色谱，并对其分离行为进行了研究，采用７５μｍ（ｉ．ｄ．）２０ｃｍ的毛细管强阳离子交换柱（３μｍ）以ＮａＨ２ＰＯ４－Ｈ３ＰＯ４缓冲液为淋洗剂，紫外柱上检测（２１４ｎｍ）考察了流动相的ｐＨ值，有机改性剂及分离电压等因素对分离的影响，研究表明，不同的ｐＨ溶质的流出次序发生改变，随着有机改性剂含量增加，溶质的保留时间减小，而电渗流却增大，同时，对分离的柱效和方法的重现性进行了     

高效液相色谱法测定精对苯二甲酸中微量杂质

建立了高效液相色谱法（HPLC）同时测定精对-苯二甲酸（PTA）中微量杂质4-羧基苯甲醛（4-CBA）、对-甲基苯甲酸（P-TOL）和苯甲酸（C7H6O2）含量的方法。采用的色谱柱为Shim-PackWAX-1柱，流动相为0.1mol/L NH3H2PO4 6%CH3OH，(pH4.5)，检测波长为254nm。PTA中微量杂质4-CBA、P-TOL和C7H6O2的含量分别为0.59-235.20mg/kg、4.52-392.00mg/kg和0.28-24.55mg/kg时线性关系良好，其线性相关系数分别为0.9998、0.9997和0.9999。苯甲酸加样平均回收率99.03％，RSD0.37％。     

Mesoporous micelle templated silica with incorporated C<Subscript>8</Subscript> and C<Subscript>18</Subscript> phase

Mesoporous silica material of MCM-41 type was synthesized by co-condensation of highly concentrated octyltriethoxysilane (OTEOS), octadecyltriethoxysilane (ODTEOS) and tetraethoxysilane (TEOS). The obtained hybrid materials were characterized using XRD, TG-DSC and low temperature adsorption/desorption of nitrogen. It was shown that the applied method of synthesis allows to obtain silica of MCM-41 type with a high degree of hydrocarbon saturation.     

Preparation of HPMC–EA–DMAEMA nanosized latex

Nanosized copolymer latex of hydroxypropylmethylcellulose (HPMC) grafted with ethyl acrylate (EA) and dimethylaminoethyl methacrylate (DMAEMA) has been prepared by acidifying submicron-sized latex particles synthesized by soap-free emulsion graft copolymerization using potassium persulfate (KPS) as initiator. The effects on the diameter of the latex particles of different conditions, for example concentration of DMAEMA, amount of HPMC, and ratio of HCl to DMAEMA for acidification, were investigated. It was found that increasing the mole ratio of HCl to DMAEMA to 1.0 and increasing the DMAEMA content both resulted in a decrease in particle diameter, whereas increasing the amount of HPMC resulted in larger particle sizes. Measurement by dynamic light scattering (DLS) revealed the diameter of the latex particles was >200 nm before acidification and <100 nm after acidification. Evidence of grafting was obtained by use of Fourier transform infrared (FTIR) spectroscopy. Transmission electron microscopy (TEM) was used to characterize the morphology of the copolymer particles before and after acidification.     

Influence of thermal and thermo-mechanical treatment

Two lipids with similar melting ranges but of different composition were analyzed using differential scanning calorimetry and X-ray diffraction. The lipids were processed via extrusion or were tempered at different temperatures; they were analyzed directly after extrusion and after storage at 40°C. Precirol ATO 5® showed high sensitivity to storage time and varied temperature exposure. Extrusion showed only marginal influences on the solid state. Melting peaks were narrower and shifted to higher temperatures in comparison to the untreated powder. Dynasan 114® was more robust, changes in the solid state could only be shown for samples treated above the melting range. Thus, Dynasan 114® is more appropriate for solid lipid extrusion of pharmaceutical products.     

Calorimetric approach to tetronic/water interactions

Tetronic^®comprises X-shaped copolymers formed by four poly(propylene oxide) (PPO) andpoly(ethylene oxide) (PEO) block chains bonded to an ethylene diamine centralgroup. Micellization behaviour of three representative Tetronics (T304, T904and T1307) was characterized to gain an insight into the interactions betweenthe copolymer unimers and the state of water in their solutions. The enthalpyof demicellization, recorded at 37°C in an isoperibol microcalorimeter,indicated that the process was in all cases exothermic and the enthalpy rankedin the order T1307≥T904>>T304. Micellization is entropy-driven owing tohydrophobic interactions between the PPO chains.DSC analysisshowed that the crystallization and melting peaks of the free water remainingin T304 and T904 solutions were progressively shifted toward lower temperaturesas the surfactant proportion increased, owing to a colligative effect. Boundwater corresponded to 3 water molecules per EO repeating unit. In the caseof T1307, which has longer PEO chains, a splitting of the melting peak wasobserved, one peak appearing around 0°C due to free water and anotherat –15°C due to interfacial water. As T1307 proportion raised, theenthalpy of the former decreased, whilst the enthalpy of the latter increased.In 40% T1307 solutions, interfacial water overcame the proportion of freewater; there being 1 interfacial and 3 bound water molecules per EO repeatingunit. Gaussian deconvolution of FTIR spectra also enabled to characterizethe evolution of free water as a function of Tetronic proportion. The dependenceof micellization and water interaction behaviour on Tetronics structure shouldbe taken into account to use these copolymers as drug solubilizers and micellarcarriers.     

环丙烯基自由基H-F力的abinitio研究

环丙烯基自由基是我们熟知的最小环状化合物。人们用不同的理论方法对它进行了预测。一般认为平面构型(D_(3h)对称性)要经受Jahn-Teller畸变以消除π轨道的简并性,畸变过程如图1所示。我们研究了此类三元环自由基引起的键的“弯曲效应”,以便对这类“张力”分子的成键特性及Jahn-Teller畸变、芳香性等给出某些理论信息,探讨其理论计算结果所能阐明的问题。