Maximum covering planning of survivable Fiber-Wireless access network considering network connectivity

Fiber-Wireless (FiWi) access network is now becoming a promising architecture for access networks. Survivability is one of the key issues in the planning of FiWi access network because many high-rate traffic flows may be interrupted in case of a single fiber failure, which can cause a huge traffic loss. In addition, the users need ubiquitous broadband access that can be provided by FiWi access network. In this paper, we propose the protection approach called Maximum Covering Planning with Survivability (MCPS), including Integer Linear Programming (ILP) solution and heuristic solution, for the planning of survivable FiWi access network against single distribution fiber failure. The proposed approach aims at maximum coverage under the constraints of network connectivity. When a distribution fiber is broken, the interrupted Optical Network Unit (ONU) can transmit traffic to its backup ONU through the wireless paths between them. Simulation results show the network coverage of clients for different number of ONUs in different urban areas, and demonstrate the relationship between network coverage and the cost represented by the number of WiFi routers.     

Laguerre-Galerkin method for nonlinear partial differential equations on a semi-infinite interval

Summary. A Laguerre-Galerkin method is proposed and analyzed for the Burgers equation and Benjamin-Bona-Mahony (BBM) equation on a semi-infinite interval. By reformulating these equations with suitable functional transforms, it is shown that the Laguerre-Galerkin approximations are convergent on a semi-infinite interval with spectral accuracy. An efficient and accurate algorithm based on the Laguerre-Galerkin approximations to the transformed equations is developed and implemented. Numerical results indicating the high accuracy and effectiveness of this algorithm are presented. Received October 6, 1997 / Revised version received July 22, 1999 / Published online June 21, 2000     

Structure and electrochemical performance of LiCoO2 cathode material in different voltage ranges

LiCoO₂ sample prepared by high-temperature solid state calcination shows a typical hexagonal structure with a single phase and fine particle size distribution. The high-voltage electrolyte with additive fluoroethylene carbonate (FEC) has been used. Electrochemical results show that the initial discharge capacities of the prepared LiCoO₂ cathode are 157.7, 169.5, 191.0, and 217.5 mAh g^?1 in the voltage ranges of 3.0–4.3, 3.0–4.4, 3.0–4.5, and 3.0–4.6 V, respectively. The capacity increases, while the initial coulombic efficiency and capacity retention decrease with increasing the charge cutoff voltage. The capacity retention is only 10.4 % after 200 cycles at 1C rate in the voltage range of 3.0–4.6 V. X-ray diffraction measurements confirm structural changes of the layered material in the different voltage ranges. A phase transition from the O3 to the H1-3 phase can be observed when LiCoO₂ is charged above 4.5 V. The AC impedance analysis indicates that the resistances (R _(sf+b), R _ct) of the prepared LiCoO₂ rapidly increase when the cell is charged to higher voltage. The amount of dissolved Co into the electrolyte also greatly increases with increasing the charge cutoff voltage.     

1X2 and 2X2 SOI Switch Applying in Optical Communication Network

We proposed a 1 × 2 and 2×2 SOI switches for applying in fiber optic communication network. The optical path loss and signal-to-noise ratio are evaluated and compared in this paper.     

Blow-up of the Smooth Solution to the Compressible Nematic Liquid Crystal System

In this paper, we investigate the blow-up of the smooth solutions to a simplified Ericksen-Lesile system for compressible flows of nematic liquid crystals in different dimensional case. We prove that whether the smooth solution of the Cauchy problem or the initial-boundary problem to the nematic liquid crystal system will blow up in finite time. The main technique is the construction of the functional differential inequality.     

The Riemann–Hilbert problem to coupled nonlinear Schrödinger equation: Long-time dynamics on the half-line

We derive the long-time asymptotics for the solution of initial-boundary value problem of coupled nonlinear Schrödinger equation whose Lax pair involves 3 × 3 matrix in present paper. Based on a nonlinear steepest descent analysis of an associated 3 × 3 matrix Riemann–Hilbert problem, we can give the precise asymptotic formulas for the solution of the coupled nonlinear Schrödinger equation on the half-line.     

Test of the Duh-Haymet-Henderson theory for mixtures: cavity correlation functions and excess volumes

The accuracy of the Duh-Haymet-Henderson (DHH) integral equation theory for predicting the cavity correlation functions of mixtures has been tested by comparison with molecular simulations. We have compared the cavity correlation functions, internal energies, and pressures computed for Lennard-Jones model mixtures of Ar/Kr, Ar/Ne, and Ar/Xe with these same quantities computed from the DHH theory and also, for reference, the Percus-Yevick (PY) integral equation theory. We found that DHH gave much better accuracy than PY at high densities. At low densities DHH and PY give essentially identical predictions. We have computed excess volumes for Ar/Kr mixtures at two pressures (10 and 20?MPa) at 132.32?K, for which experimentally derived data are available. The DHH theory predicts the correct trends and is quantitatively more accurate than the PY theory for predicting the excess volumes. We have tested the local optimality of the DHH theory for pure fluids by adding two adjustable parameters to the DHH bridge function expression to see if it is possible to improve the DHH predictions of the cavity correlation function empirically, holding the form of the bridge function constant. We found that no single set of adjustable parameter values could improve the accuracy of DHH over multiple different isotherms. Furthermore, perturbing DHH leads to a decrease in accuracy of the predictions of both the pressure and energy, although small improvements in the cavity correlation functions were achieved. Thus, the DHH theory is locally optimal, given the form of the bridge function.     

Structures,microstructures, physical and chemical properties of different rice grains

Herein, we demonstrated a well-rounded exploration of the universal structures, microstructures and physical properties of different rice grains. We show that these rice grains are nanocrystalline in nature, have the standard pattern of type A rice crystalline, and can be attributed to the hexagonal crystal structure with space group of P6. These rice grains have uneven surfaces, clusters of the granules, or schistose structure. Carbon, nitrogen and oxygen elements are presented in the rice grains. No significant difference is observed in FTIR spectra in these rice grains, indicating the fundamental chemical structures of these rice grains are analogical. Their microstructural and physical properties were investigated in detail. Moreover, chemical properties (e.g. thermal stability) of the rice grains were explored. This research provides an in-depth understanding on the physical and structural properties on the atomic and molecular level, as well as guidance for food and industry applications.     

Experimental research on distributed fiber sensor for sliding damage monitoring

A distributed optical fiber sensor (DOFS) with the principle of microbend loss has been developed for concrete or rock-sliding damage measurement. The combination of multiple microbend sensors can form a sensor array for distributed sensing application in monitoring local slippage or deformation along the rock mass of the high slope, and the optical time-domain reflectometry (OTDR) can be conveniently used for interrogation of each sensor point. The sensor sensitivity can be obtained at a specific range according to the requirement of the model test condition. Connected with multiplexed sensing processing schemes, its sliding range of dynamic sensing response reached 0–3.6 mm and semi-empirical formula was fitted according to data from model tests. The DOFS array may find a potential application in real-time monitoring and damage detection of large and critical slope engineering structures.     

Nonlinear optical switching matrix

We show that nonlinear directional couplers with variable coupling coefficients can be used to compose a special kind of switching matrix. The switching matrix can be controlled by the signal itself or by a strong pump. Light routing is realized by adjustment of the power of the signal or the pump. Because light routing is based on the optical Kerr effect, ultrafast routing is possible.