Synthesis, Structure and Properties of a Novel Cobalt(Ⅱ) Bromide Complex Supported by Phosphine Ligands

<正>The C-Br bond of 2-bromothiophene was successfully cleavaged by tetrakis(trimethylphosphine)cobalt(0). Penta-coordinate cobalt(II) bromide complex 1 (α-C_4H_3S)CoBr(PMe_3)_3 as C-Br bond activation product was obtained. The molecular and crystal structures of complex 1 were determined by single-crystal X-ray diffraction. Complex 1 belongs to the orthorhombic crystal system, space group Pnma with a = 20.428(4) , b =11.036(2) , c = 9.201(2), V = 2074.3(7)~3, Z = 4, D_c = 1.442 g/cm~3, μ = 0.401 mm~(-1), F(000) = 924 and T = 273 K. Complex 1 was also characterized by elemental analysis, IR, UV-Vis, photoluminescence (PL) spectroscopy and TGA.     

Sansalvamide A固相合成新方法

报道了Pd催化丁基二乙基硅烷树脂与N-Boc-4-溴代苯丙氨酸甲酯直接反应形成Si—Ar键一步构建出硅基连接分子的新方法, 并采用Boc策略增长肽链, 以PyBOP (benzotriazole-1-yl-oxy-tris-pyrrolidino-phosphonium hexafluoro- phosphate)为环合剂固相合成了sansalvamide A.     

调制式DSC在高聚物研究中的应用

综述了一种新的热分析技术－－调制式差示扫描量热示（Modulated Differentail Scanning Calorimetry）。对其工作原理，优点及在高聚物研究中的应用作了简介。     

A Meldrum's Acid Catalyzed Synthesis of Bis(indolyl)methanes in Water under Ultrasonic Condition

A highly effective Meldrum's acid catalyzed synthesis of bis(indol‐3‐yl)methanes has been developed. This reaction provides the corresponding bis(indol‐3‐yl)methanes in high yields after short reaction time in the presence of 2 mol % catalyst in water under ultrasonic condition.     

A HIGH ORDER KERNEL INDEPENDENT FAST MULTIPOLE BOUNDARY ELEMENT METHOD FOR ELASTODYNAMICS

基于核无关的快速多极方法, 发展了一种弹性动力学问题的快速、高精度边界元分析方法. 采用基于二次曲面单元的Nyström 离散, 将边界积分方程转化为求和形式, 可以方便地进行加速计算;由于采用二次元, 边界元分析精度很高. 将一种新型快速多极方法用于Nyström 边界元法的加速计算, 该方法的数值实现简便、不依赖于积分方程基本解的表达式, 因此通用性很好;该方法还具有最优的计算量和存储量、精度高且可以控制. 结合Nyström 边界元系数矩阵和快速多极方法转换矩阵的特点, 提出一种大幅度降低边界元内存消耗的策略. 数值结果表明, 该方法无论在分析精度, 还是计算速度和内存消耗上, 都大大优于同类方法, 是一种快速、通用的工程弹性动力学问题大规模数值分析方法.     

Zn(BTZ)2白色有机电致发光材料的合成及其器件制备

以PCl₃为脱水剂,将邻氨基硫酚与水杨酸脱水环化合成出2-(2-羟基苯基)苯并噻唑,并进一步将所得产物与乙酸锌反应合成出2-(2-羟基苯基)苯并噻唑螯合锌(Zn(BTZ)₂)材料。以该配合物作为发光层制备出结构为ITO/PVK:TPD/Zn(BTZ)₂/Al近白色电致发光器件,其色坐标位于白场之内(x=0.242,y=0.359),在驱动电压为16V时,亮度达3200cdm²,对应的量子效率为0.32%。进一步在Zn(BTZ)₂中掺入橙红色染料Rubrene,制成ITO/PVK:TPD/Zn(BTZ)₂:Rubrene/Al结构器件,实现了纯白色发光(色坐标值:x=0.324,y=0.343),非常接近于白色等能点,且量子效率达0.47%。最后对上述器件的发光和电学性能进行了深入的研究和探讨。     

氦在铝表面辐照和积聚的团簇动力学模拟

我们利用团簇动力学模型(IRadMat)研究了keV-He离子辐照金属铝的缺陷动力学和氦的聚集行为.通过对不同俘获类型(团簇、晶界和位错)俘获He浓度的定量分析,我们发现大多数He原子被晶界吸收,这成为铝在低辐照通量下发生脆化的主要原因.随着辐照能量的增加,He滞留峰的位置会变得更深.然而,随着辐照通量的增加,He在体内的滞留量会变得更多,但滞留深度的峰值位置不变.我们的结果表明,晶界的影响在He的滞留分布以及铝的脆化行为中起着关键作用,这也有助于我们理解He在金属中的动力学行为和损伤的分布.     

Structure and performance of polyamide-6 membranes prepared by thermally induced phase separation

<正>The asymmetric polyamide-6(PA6) membranes were prepared by thermally induced phase separation.From the scanning electron microscopy(SEM) images,it is observed that with the increase of silicon dioxide(SiO_2) content the structure of obtained membranes gradually varied from cellular structure to large ball-shaped cluster aggregates. Subsequently,with the addition of SiO_2,pure water flux increased first and then decreased,while rejection showed the opposite trend.Besides,raising the coagulation bath temperature was favorable to increase pure water flux.Consequently, different membrane morphologies and performance were obtained by changing SiO_2 content and coagulation bath temperature.     

聚乙烯醇缩丁醛LB膜制备及其对硬脂酸镉LB膜的修饰

研究了PVB单分子膜的π～A曲线和稳定性,沉积了优质LB膜,发现将PVB与CdSt₂形成交替异质的LB膜能提高膜的光学质量;在CdSt₂LB膜的上面封装PVBLB膜能保持CdSt₂LB膜的结构。     

B20N20团簇的结构与稳定性

B3LYP/6-31G* density functional theory calculations have been carried out on the structure and stability of ten B20N20 clusters. It was found that two new proposed isomers with two octagons, twelve hexagons, eight squares in Cab and C2 symmetry were more stable than the isomer with sixteen hexagons and six squares in C2 symmetry which was previously deemed to the most stable by 79.5 and 13.8 kJ/mol respectively. The isomer with two decagons in S10 symmetry is much higher in energy than the most stable structure in C4h symmetry by 637.2 kJ/mol.