Thermal conductance for single wall carbon nanotubes

We report a theoretical analysis of the phonon thermal conductance, κ(T), for single wall carbon nanotubes (SWCN). In a range of low temperatues up to 100 K, κ(T) of perfect SWCN is found to increase with temperature, approximately, in a parabolic fashion. This is qualitatively consistent with recent experimental measurements where the tube-tube interactions are negligibly weak. When the carbon-carbon bond length is slightly varied, κ(T) is found to be qualitatively unaltered which implies that the anharmonic effect does not change the qualitative behavior of κ(T). Received 12 June 2001     

四种多变量校准方法在FTIR多组分分析中的性能比较

本文对四种多变量校准方法－－经典最小二乘法（CLS），偏最小二乘法（PLS），卡尔曼滤波法（KFM）以及人工神经网络法（ANN）－－在多组分浓度分析方面的性能进行了比较。选择五种红外谱图严重混叠的大气有机毒物－－1，3－丁二烯，苯，邻二甲苯，氯苯和丙烯醛－－作为分析对象。分别计算各种方法对该5组分体系的平均预测误差MPE和平均相对误差MRE进行比较。结果表明，偏最小二乘法在处理这类问题中是最稳健的方法。     

大学物理实验教学改革的实践与思索

本主要介绍了我校近年来在大学物理实验课程体系和教学内容改革的实践及下一步改革的思路。     

类型γ射线能谱指纹的识别机理

放射源的辐射指纹能起到标识和鉴别放射性物体的作用.在涉及核弹头不可逆销毁过程的深度核裁军核查中,核弹头的辐射指纹对标识和鉴别裁减下来的核弹头将起到关键作用.预先研究辐射指纹的有关技术,如识别机理的研究,将有助于深度核裁军的核弹头核查技术发展.以实验室放射源为研究对象,探索了类型γ射线能谱指纹的同一性识别机理.类型γ射线指纹识别机理的研究,就是要找出一种合适的方法,以较高的置信度,描述两个正在进行比较的γ射线指纹是否为同一放射源的指纹.采用了谱形比较法,并用谱相似度概念来描述两个指纹的相似程度.在谱形比较思想的指导下,编制了放射源类型指纹识别软件,并通过放射源同一性的识别实验验证了软件的有效性,同时研究了谱相似度随统计涨落和测量条件,如时间、源强和本底等因素的变化情况.研究结果表明:1)用相似度概念来描述两个指纹的相似程度,回答两个待比较的γ射线能谱是否代表同一类型放射源,是切实可行的;2)该识别机理只具备识别放射源类型的能力,而对同一类型、差异甚微的放射源个体还不能识别 关键词： γ射线能谱指纹 辐射指纹 识别机理 核查技术     

Sr2RuO4的热电势

Sr2RuO4是第一个无CuO面的层状强关联氧化物超导体.测量了9至260K温度范围内Sr2RuO4的热电势,观测到在此温度范围内其热电势为正值.用两种载流子模型对实验数据进行了拟合,并且与Hall系数的实验结果进行了比较,发现低温下两种载流子对热电势和Hall系数的贡献比较类似,但在高温区空穴对热电势的贡献很大而相应地对Hall系数的贡献不占主要地位. 关键词： Sr2RuO4 热电势     

Synthesis and characterization of white‐light‐emitting polyfluorenes containing orange phosphorescent moieties in the side chain

Two orange phosphorescent iridium complex monomers, 9‐hexyl‐9‐(iridium (III)bis(2‐(4′‐fluorophenyl)‐4‐phenylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐PIr) and 9‐hexyl‐9‐(iridium(III)bis(2‐(4′‐fluorophenyl)‐4‐methylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐MIr), were successfully synthesized. The Suzuki polycondensation of 2,7‐bis(trimethylene boronate)‐9,9‐dioctylfluorene with 2,7‐dibromo‐9,9‐dioctylfluorene and Br‐PIr or Br‐MIr afforded two series of copolymers, PIrPFs and MIrPFs, in good yields, in which the concentrations of the phosphorescent moieties were kept small (0.5–3 mol % feed ratio) to realize incomplete energy transfer. The photoluminescence (PL) of the copolymers showed blue‐ and orange‐emission peaks. A white‐light‐emitting diode with a configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)/PIr05PF (0.5 mol % feed ratio of Br‐PIr)/Ca/Al exhibited a luminous efficiency of 4.49 cd/A and a power efficiency of 2.35 lm/W at 6.0 V with Commission Internationale de L'Eclairage (CIE) coordinates of (0.46, 0.33). The CIE coordinates were improved to (0.34, 0.33) when copolymer MIr10PF (1.0 mol % feed ratio of Br‐MIr) was employed as the white‐emissive layer. The strong orange emission in the electroluminescence spectra in comparison with PL for these kinds of polymers was attributed to the additional contribution of charge trapping in the phosphorescent dopants. © 2007 Wiley Periodicals, Inc. JPolym Sci Part A: Polym Chem 45: 1746–1757, 2007     

MTL代数的特征定理

对于逻辑系统代数结构的研究,是一个十分重要的研究课题.近期提出的BL代数,R_0代数,MTL代数就是这个方向具有代表性的研究成果.本文讨论MTL代数的性质与结构,给出这种代数的几个特征定理,澄清这种代数与其它代数结构的关系.鉴于单位区间中由左连续t-范数诱导的剩余蕴涵与MTL代数的紧密联系,本文还考察了这种模糊蕴涵的特征性质.     

On congruence lattices of regular semigroups with Q-inverse transversals

Communicated by F. Pastijn     

绝缘表面和气体导电与湿度的关系

湿度对绝缘体表面电导和气体电导有一定的影响，但通常在湿度传感器的研究中忽略了气体电导的贡献。本文通过特殊设计装置来区分表面电导和气体电导，并分别从实验和理论上进行了定性的研究。     

Improving forecasting performance by employing the Taguchi method

To satisfy the volatile nature of today’s markets, businesses require a significant reduction in product development lead times. Consequently, the ability to develop precise product sales forecasts is of fundamental importance to decision-makers. Over the years, many forecasting techniques of varying capabilities have been introduced. The precise extent of their influences, and the interactions between them, has never been fully clarified, although various forecasting factors have been explored in previous studies. Accordingly, this study adopts the Taguchi method to calibrate the controllable factors of a forecasting model. An L₉(3⁴) inner orthogonal array is constructed for the controllable factors of data period, horizon length, and number of observations required. An experimental design is then performed to establish the appropriate levels for each factor. At the same time, an L₄(2³) outer orthogonal array is used to consider the inherited parameters of forecasting method as the noise factors of Taguchi method simultaneously. An illustrated example, employing data from a power company, serves to demonstrate the thesis. The results show that the proposed model permits the construction of a highly efficient forecasting model through the suggested data collection method.