Anti-solvent assisted treatment for improved morphology and efficiency of lead acetate derived perovskite solar cells

An efficient solution-processable route employing Pb(Ac)₂ as lead source and anti-solvent treatment to achieve fully covered and homogenous perovskite films is reported.     

The identification of tricyclic neuroleptics and sulphonamides by high-performance thin-layer chromatography

Circular high-performance thin-layer chromatography (HPTLC) has been used to differentiate a series of twelve tricyclic neuroleptics, using both normal phase and reverse phase procedures. The use of normal phase systems also allows the resolution of geometric isomers of chlorprothixene, clopenthixol and flupenthixol. Thirteen sulphonamides and Trirnethoprim may also be distinguished using HPTLC.     

Two Novel Myrinsol Diterpenes from Euphorbia prolifera

Two novel diterpenes,Euphorprolitherin A(1) and Euphorprolitherin B(2), were isolated from the roots of Euphorbia prolifera. Their structures were elucidated on the basis of spectroscopic methods.     

室温以上磁制冷材料La(Fe1-xCox)11.7Al1.3化合物的研究

通过X射线衍射分析和超导量子干涉磁强计（SQUID）磁性测量,研究了Co替代Fe含量对居里温度在室温以上的磁制冷材料La（Fe1-xCox）11.7Al1.3（x=0.072,0.081）磁结构和磁性能的影响。La（Fe1-xCox）11.7Al1.3材料的居里温度随Co的含量增加而增加,La（Fe0.919Co0.081）11.7Al1.3的居里温度为311 K。当外场变化为1.9 T时磁熵变达到3.6 J·kg^-1·K^-1,RCP值为168.6 J·kg^-1,虽然它的磁熵变小于具有巨磁熵变的磁制冷材料,但是它在磁场为1.9 T时的制冷能力与这些材料相当。     

Ionic limiting molar conductivity calculation of Li-ion battery electrolyte based on mode coupling theory

A method is proposed based on mode coupling theory in which the ion transference number is introduced into the theory. The ionic limiting molar conductivities of LiPF6, LiClO4, LiBF4, LiCF3SO3, Li(CF3SO3)2N, LiC4F9SO3, and LiAsF6 in PC(propylene carbonate), GBL(gamma-butyrolactone), PC(propylene carbonate)/EMC(ethylmethyl carbonate), and PC(propylene carbonate)/DME(dimethoxyethane) are calculated based on this method, which does not involve any adjustable parameter. The results fit well to the literature data which are calculated by an empirically adjusted formula. This presents a potential way to calculate the conductivities of Li-ion battery electrolytes.     

Renewable-surface sol-gel derived carbon ceramic electrode fabricated by [Ru(bpy)(tpy)Cl]PF6 and its application as an amperometric sensor for sulfide and sulfur oxoanions

A highly sensitive and fast responding sensor for the determination of thiosulfate, sulfite, sulfide and dithionite is described. It consists of a chemically modified carbon ceramic composite electrode (CCE) containing [Ru(bpy)(tpy)Cl]PF6 complex that was constructed by the sol-gel technique. A reversible redox couple of Ru(II)/Ru(III) was observed as a solute in acetonitrile solution and as a component of carbon based conducting composite electrode. Electrochemical behavior and stability of modified CCE were investigated by cyclic voltametry, the apparent electron transfer rate constant (kappa(S)) and transfer coefficient (a) were determined by cyclic voltametry which were about 28 s(-1) and 0.43 respectively. Electrocatalytic oxidation of S(2-), SO3(2-), S2O4(2-) and S2O3(2-) were effective at the modified electrode at significantly reduced overpotentials and in the pH range 1-11. Optimum pH values for amperometric detection of thiosulfate, dithionite, sulfide and sulfite are 7, 9, 2 and 2. Under the optimized conditions the calibration curves are linear in the concentration ranges 1-500, 3-80, 2-90 and 1-100 microM for S2O3(2-), SO3(2-), S2- and S2O4(2-) determination. The detection limit (signal to noise is 3) and sensitivity are 0.5 and 12, 2.8 and 6, 1.6 and 8, and 0.65 microM and 80 nA microM(-1) for thiosulfate, sulfite, sulfide and dithionite detection. The modified carbon ceramic electrode doped with Ru-complex shows good reproducibility, a short response time (t < 2 s), remarkable long term stability (> 6 month) and especially good surface renewability by simple mechanical polishing (RSD for eight successive polishing is 2%). The advantages of this sulfur compound amperometric detector based on ruthenium doped CCE are high sensitivity, inherent stability at a broader pH range, excellent catalytic activity, less expense and simplicity of preparation in comparison with recently published papers. This sensor can be used as a chromatographic detector for analysis of sulfur derivatives.     

The photoluminescence of Co-Al-layered double hydroxide

We report a new optical behaviour of pure Co-Al-layered double hydroxide (LDH).It was found that the Co-Al-LDH sample could emit fluorescence without any fluorescent substances intercalated.Its excitation spectrum shows a maximum peak near the wavelength 370nm,the maximum emission peak appears at 430 nm and the photoluminescence colour of the Co-Al-LDH sample is blue.This new optical property will be expected to extend the potential applications of LDHs in optical materials field.     

Photohydration and photosolvolysis of biphenyl alkenes and alcohols via biphenyl quinone methide-type intermediates and diarylmethyl carbocations

Evidence is presented for the photochemical generation of novel biphenyl quinone methide (BQM)-type intermediates on photolysis of hydroxybiphenyl alkenes 7 and 8 and hydroxybiphenyl alcohols 9 and 10. Mechanistic investigations utilizing product, fluorescence, and nanosecond laser flash photolysis (LFP) studies indicate two distinct pathways for the formation of these BQMs depending upon the functional groups of the progenitor. Formal excited-state intramolecular proton transfer (ESIPT) between the phenol and the alkene led to BQMs upon irradiation of the hydroxybiphenyl alkenes 7 and 8, while excited-state proton transfer (ESPT) to solvent followed by dehydroxylation was responsible for BQM formation from the hydroxybiphenyl alcohols 9 and 10. Photolysis of 7 and 8 in aqueous CH(3)CN gave photohydration products via attack of water on the respective BQMs, while photolysis of the analogous methyl ethers (of the phenolic moiety) gave only carbocation intermediates. Hydroxybiphenyl alcohols 9 and 10 yielded the corresponding photomethanolysis products in aqueous methanol, through attack of CH(3)OH on the respective BQMs. Although no evidence was found for BQM formation in LFP studies of 8 and 10, due to its suspected short lifetime, the respective diaryl carbocation (lambda(max) 420 nm, tau = 8.5 micros) has been observed upon irradiation of 8 in 2,2,2-trifluoroethanol. A BQM (lambda(max) 580 nm) was observed for 9 but not for 10, the latter having more complex chemistry on laser excitation, resulting in a transient that appears to mask any BQM absorption. Significant quenching of fluorescence from the hydroxybiphenyl alkenes at low water content implies that H(2)O is directly involved in reaction from the singlet excited state. The decrease in fluorescence intensity of 8 was found to depend on [H(2)O](3); however, the distance required for ESIPT in these systems is too large to be bridged by a water trimer. The nonlinear quenching has been attributed to deprotonation of the phenol by two water molecules, with concerted protonation at the alkene by another molecule of water. Fluorescence quenching of the hydroxybiphenyl alcohols required much higher water content, implying a different mechanism of reaction, consistent with the proposal of ESPT (to solvent water) followed by dehydroxylation.     

Separation of lidocaine and its metabolites by capillary electrophoresis using volatile aqueous and nonaqueous electrolyte systems

The separation of the basic drug lidocaine and six of its metabolites has been investigated both by using volatile aqueous electrolyte system, at low pH and by employing non-aqueous electrolyte systems. In aqueous systems, the best separation of the compounds under the investigated conditions was achieved by using the electrolyte 60 mM trifluoroacetic acid (TFA)/triethylamine (TEA) at pH 2.5 containing 15% methanol. With this electrolyte, all seven compounds were well separated with high efficiency and migration time repeatability. The separations with bare fused-silica capillaries and polyacrylamide-coated capillaries were compared with higher separation efficiency with the latter. On the other hand, near baseline separation of all the seven compounds was also obtained by employing the non-aqueous electrolyte, 40 mM ammonium acetate in methanol and TFA (99:1, v/v), with comparable migration time repeatability but lower separation efficiency relative to the aqueous system.     

Highly efficient separation of isomeric epoxy fatty acids by micellar electrokinetic chromatography

A capillary electrophoresis (CE) method has been developed for simple and direct separation of cis- and trans-12,13-epoxy-9(Z)-octadecenoic acid and 9,10-epoxy-12(Z)-octadecenoic acid isomers. Separation was performed in micellar electrokinetic capillary chromatography (MEKC) using a buffer consisting of 25 mM borate (pH 9.20), 10 mM sodium dodecyl sulfate (SDS) and 10% v/v acetonitrile. The key variables, concentrations of SDS and organic modifier, were optimized by the application of a factorial experimental design. The use of a low micellar concentration, just above critical micelle concentration (CMC), in a background electrolyte containing an organic modifier not only made it possible to dissolve and separate highly hydrophobic fatty acid isomers, but also resulted in improved separation efficiency and selectivity. Separation efficiency up to 4 x 10(5) theoretical plates/m was achieved under an optimized condition. Also investigated were the influence of temperature on separation and the effect of organic modifier concentration on the dynamic exchange of the analytes between micelles and the bulk of the buffer solution. Direct UV was applied for detection of the fatty acids.