Synthesis of 5-Substituted 1,3-Dimethylpyrazolo[4,3-<Emphasis Type="Italic">e</Emphasis>][1,2,4]triazines

Summary.  A novel method for the synthesis of a new series of 5-substituted 1,3-dimethyl pyrazolo[4,3-e][1,2,4]triazines is described. The new synthetic strategy is based on the classical Bischler 1,2,4-benzotriazine synthesis. This approach involves the preparation of 5-hydrazinopyrazole from 5-chloro-1,3-dimethyl-4-nitropyrazole followed by acylation and nitro group reduction to form the corresponding 4-amino-3-(acylhydrazino)pyrazoles. Intramolecular oxidative cyclization of the latter derivatives, using polyphosphoric acid, produced the respective target pyrazolotriazines.     

Synthesis of 5-Substituted 1,3-Dimethylpyrazolo[4,3-e][1,2,4]triazines

A novel method for the synthesis of a new series of 5-substituted 1,3-dimethyl pyrazolo[4,3-e][1,2,4]triazines is described. The new synthetic strategy is based on the classical Bischler 1,2,4-benzotriazine synthesis. This approach involves the preparation of 5-hydrazinopyrazole from 5-chloro-1,3-dimethyl-4-nitropyrazole followed by acylation and nitro group reduction to form the corresponding 4-amino-3-(acylhydrazino)pyrazoles. Intramolecular oxidative cyclization of the latter derivatives, using polyphosphoric acid, produced the respective target pyrazolotriazines.     

Isotope shift studies in the spectra of Gadolinium in UV region and term shifts of high even levels of Gd I

Isotope shift Δσ(¹⁵⁶Gd?¹⁶⁰Gd) is reported in 70 spectral lines of neutral gadolinium atom (Gd I) in the 3290- 3920 Å region providing isotope shift data in UV lines of Gd I spectrum for the first time. The measurements were carried out on a photoelectric recording Fabry-Perot Spectrometer using highly enriched isotopic samples of gadolinium. Term isotope shifts ΔT(¹⁵⁶Gd?¹⁶⁰Gd) have been evaluated for 48 high lying even parity energy levels of Gd I using this data; new ΔT values have been obtained for 24 levels. Electronic configurations 4f⁷5d6s6p, 4ff⁷5df²6p and 4f⁸5d6s assigned earlier to these even levels have been either confirmed or configuration mixing pointed out in some of these levels. Probable assignment of 4f⁸5d6s configuration to 8 even levels between 32 930 and 35 500 cm^-1 have been confirmed.     

Determination of silicon by an indirect atomic-absorption method using carbon-rod electrothermal atomization

An indirect procedure has been developed for the determination of trace amounts of silicon by atomic-absorption with carbon-rod electrothermal atomization. After dissolution, the silicon is extracted as silicomolybdic acid into a mixture of diethyl ether and pentan-1-ol (5 + 1). The co-extraction of excess of molybdate reagent is prevented by the addition of citrate, which also destroys phosphomolybdic and arsenomolybdic acids. The organic layer is washed with hydrochloric acid, mul quantities are transferred to the electrothermal atomizer and the molybdenum is measured. The method has been applied to analysis of several steels.     

某些含二维液晶基元的热致液晶高分子的向列态纹影响构

发现某些含二维液晶基元的热致液晶高分子容易产生反向壁织构与含有高强度有错点（│Ｓ│大于１）的向列态纹影织构。这类液晶高分子的织构与形态学特点与含一维棒状液晶基元的其他液晶高分子不同。     

Polarographic microdetermination of sulphur in organic compounds after oxygen flask combustion

Summary Three polarographic micro-methods are described for the determination of sulphur in organic compounds after oxygen-flask combustion. The products are converted into sulphuric acid by oxidation with hydrogen peroxide, the excess of which is expelled through boiling. The methods are based upon allowing the sulphuric acid to react with an excess of barium iodate or bromate, then recording polarographically the cathodic reduction wave of the iodate or bromate ion. The bromate methods are superior to the iodate method being simpler and more rapid, and the results are correct to within ca. ±0.5%.

---

Zusammenfassung Drei polarographische Mikromethoden zur Bestimmung von Schwefel in organischen Verbindungen nach deren Verbrennung im Sauerstoffkolben wurden beschrieben. Die Verbrennungsprodukte werden durch Oxydation mit Wasserstoffperoxid in Schwefelsäure umgesetzt. Der Überschuß des Oxydationsmittels wird durch Kochen zerstört. Die Schwefelsäure läßt man mit überschüssigem Bariumjodat oder -bromat reagieren und mißt dann polarographisch die kathodische Reduktionswelle des Jodats oder Bromats. Die Bromatmethode ist der Jodatmethode überlegen, da sie einfacher und rascher zu Resultaten führt, die innerhalb ±0,5% korrekt sind.

     

Design,Synthesis, and Characterization of Photolabeling Probes for the Study of the Mechanisms of the Antiviral Effects of Ribavirin

Ribavirin, the only small molecule available so far for treating hepatitis‐C‐virus infection, was recently used in an emergency context to treat patients with severe acute respiratory syndrome (SARS) in the early stages of the disease. To study the mechanisms responsible for the antiviral effects of ribavirin by using a photolabeling approach, we designed, synthesized, and characterized the azidotriazole nucleosides 1 and 2 as photolabeling probes of ribavirin. These probes were synthesized either by performing nucleophilic substitution of the corresponding bromotriazole nucleoside with NaN₃ (Scheme 2) or by directly coupling the azidotriazole with the protected ribose sugar (Scheme 4). The azidotriazole nucleosides 1 and 2 showed a fast, clear‐cut photochemical reaction, which suggests that they are promising candidates for use in photolabeling studies.     

Synthesis, Characterization and Catalysis of New Pillared Anionic Clays by [GaW_(11)O_(39)M(H_2O)]~(7-)(M=Mn~(2 ),Co~(2 ) or Ni~(2 ))

ＩｎｔｒｏｄｕｃｔｉｏｎＡｎｉｏｎｉｃｃｌａｙｓ（ｌａｙｅｒｅｄｄｏｕｂｌｅｈｙｄｒｏｘｉｄｅｓ）ａｒｅｉｍｐｏｒｔａｎｔｌａｙｅｒｅｄｍａｔｅｒｉａｌｓ．Ｔｈｅｇｅｎｅｒａｌｆｏｒｍｕｌａｉｓ［Ｍ２＋（１－ｘ）Ｍｘ３＋（ＯＨ）２］ｘ＋Ａｎ－ｘ／ｎｍ...     

Characteristic absolute efficiency response curves of a high purity germanium detector in the energy range 50–1500 keV

The characteristic absolute efficiency response curves of a high purity germanium detector (HPGe) for different counting geometries have been established in the energy range 50–1500 keV by measuring the absolute efficiencies using both mono-energetic and multi-gamma emitting radionuclide point calibrated sources supplied by IAEA. Several fitting functions proposed in the literature were assessed for interpolation within the intermediate energy range of interest. The values of the function parameters have been determined by using the linear least square methods. The problems associated with the measurements of experimental efficiency data at small source–detector distances and the importance of the correlation matrix in the estimation of precise uncertainties have been shown. It was found that the inclusion of correlation matrices in the propagation of error formulae plays a significant role up to 450 keV gamma-ray energy and results in a drastic reduction of errors associated with the predicted efficiencies. The discrepancy at closer counting geometries in the absence of true gamma-gamma coincidence corrections is found to reach to about 30%.     

Novel aromatic polyimides derived from benzofuro[2,3-b]benzofuran-2,3,8,9-tetracarboxylic dianhydride (BBTDA)

Benzofuro[2,3-b]benzofuran-2,3,8,9-tetracarboxylic dianhydride (BBTDA) is introduced as a monomer for the synthesis of a series of novel polyimides with enhanced high thermal stability. Polyimides derived from BBTDA and aromatic diamines showed high glass transition (T_g>296 °C) and degradation (T₅>455 °C) temperatures, and were soluble in organic solvents (i.e. N-methyl pyrrolidone (NMP), N,N^′-dimethylformamide (DMF), N,N^′-dimethylacetamide (DMAc)). The polymerization yielded high-molecular-weight polyimides with inherent viscosities ranging from 1.75 to 2.14 dl/g. The polymers were characterized by IR and elemental analysis.