Dimethylformamide as a carbon monoxide source in fast palladium-catalyzed aminocarbonylations of aryl bromides

Dimethylformamide (DMF) acts as an efficient source of carbon monoxide and dimethylamine in the palladium-catalyzed aminocarbonylation (Heck carbonylation) of p-tolyl bromide to provide the dimethylamide. Addition of amines to the reaction mixture in excess delivers the corresponding aryl amides in good yields. The amines employed, benzylamine, morpholine, and aniline, all constitute good reaction partners. The reaction proceeds smoothly with bromobenzene and more electron-rich aryl bromides, but electron-deficient aryl bromides fail to undergo aminocarbonylation. The reactions are conducted at 180-190 degrees C for 15-20 min with microwave heating in a reaction mixture containing imidazole and potassium tert-butoxide: the latter is required to promote decomposition of the DMF solvent at a suitable rate. The beneficial effects of controlled microwave irradiation as an energy source for the rapid heating of the carbonylation reaction mixture are demonstrated. The carbonylation procedure reported herein, which relies on the in situ generation of carbon monoxide, serves as a convenient alternative to other carbonylation methods and is particularly applicable to small-scale reactions where short reaction times are desired and the direct use of carbon monoxide gas is impractical.     

THE ADSORPTION OF OXYGEN OVER ThO_2-BaF_2 CATALYST

IntroductionInthcsclcctivcoxidationofalkanes.suchas'theoxidativccouplingofmcthanc(0CM)andthcoxidativcdch}'drogenationofcthanc(0DE)t0prcparccth}'lene.bothoxidcionsofthelatticeandtheox}'genspeciesovercataIystsuffocepla}'animportantrole.Althoughcxtcnsivcinvcstigationshavcbeengivcntothecharactcrizationofox}'gcnspccicsandthcreactionofox}'gcnspecicsx`ithalkanes,itisstilldifficulttosayt`hichoncsofox}'gcnspcciesarcthcactivcspecicsinthcactivation0falkancs.bccauscthenaturcofcatal}'stsandthecxperimcntc…     

Radiochemical analysis of toxic elements in biological materials

A radiochemical method for simultaneous determination of toxic elements (Hg, Cd and Sb) in biological materials has been developed. The procedure involves the irradiation of samples with thermal neutrons and quantitative one-step separation in 0.1M 4-(5-nonyl)pyridine/benzene from 2.0M hydrochloric acid followed by gamma-ray spectrometry. The procedure is applied for the analysis and to the studies of distribution of these elements in IAEA-RMs, human serum and hair samples. Results obtained are found to be in good agreement with those reported in the literature.     

Activity concentrations of 210Po in the soft parts of cockle (Anadara granosa)at Kuala Selangor, Malaysia

Polonium-210 has been measured in the soft parts of Anadara granosa purchased at Kuala Selangor, West Coast of Malaysia in August 2001, April 2002 and September 2002. It is shown that ²¹⁰Po is non-uniformly distributed within cockles of various sizes (i.e., 2.5, 3.0, 3.5 and 4.0 cm of shell length) and the concentration of ²¹⁰Po in the soft parts of cockle was significantly different (p<0.05) due to sampling date. The highest value was observed in the smallest cockle with a shell length of 2.5 cm (411.6±26.16 Bq/g dry wt.). It is clear that there is an allometric relationship between ²¹⁰Po activity concentration and individual cockle weight. This may reflect on the differences of metabolic rate and growth age of cockles. The mean activity concentration of ²¹⁰Po measured in Kuala Selangor filtered water were 1.75±0.17, 0.79±0.08 and 1.13±0.20 Bq/kg for August 2001, April 2002 and September 2002, respectively. The yield concentration factors for ²¹⁰Po in the soft parts of cockles varies from 27.3^. 10³ to 106.9^. 10³. This revised version was published online in July 2006 with corrections to the Cover Date.     

Illustration of a simple and versatile scheme for reversing enantiomeric elution order and facilitating enantiomeric impurity determination in capillary electrophoresis

Determination of enantiomeric purity is most often done under overload conditions, which leads to deformed peaks. In general, the best resolutions are obtained when the small peak appears before the large peak in the electropherogram. To be able to determine the R(+)-impurity in the S(-)-form as well as the S(-)-impurity in the R(+)-form the elution orders have to be reversed. The present paper describes reversal of enantiomeric elution order for the basic analyte propranolol and the acidic analyte ibuprofen. For propranolol, a charged heptakis-(6-sulfo)-beta-cyclodextrin (CD) is used in the background electrolyte. For ibuprofen, a mix of the charged heptakis-(6-sulfo)-beta-CD and the uncharged heptakis-(2,3,6-tri-O-methyl)-beta-CD is used in the background electrolyte. The use of a coated capillary and reversal of the polarity shift the elution order, buffer composition is unchanged in both cases. The enantiomers of propranolol and ibuprofen are well separated on both the coated and uncoated capillaries. Detection limits of enantiomer impurities are investigated using spiked samples of both propranolol and ibuprofen.     

Diverse redox-active molecules bearing O-, S-, or Se-terminated tethers for attachment to silicon in studies of molecular information storage

A molecular approach to information storage employs redox-active molecules tethered to an electroactive surface. Attachment of the molecules to electroactive surfaces requires control over the nature of the tether (linker and surface attachment group). We have synthesized a collection of redox-active molecules bearing different linkers and surface anchor groups in free or protected form (hydroxy, mercapto, S-acetylthio, and Se-acetylseleno) for attachment to surfaces such as silicon, germanium, and gold. The molecules exhibit a number of cationic oxidation states, including one (ferrocene), two [zinc(II)porphyrin], three [cobalt(II)porphyrin], or four (lanthanide triple-decker sandwich compound). Electrochemical studies of monolayers of a variety of the redox-active molecules attached to Si(100) electrodes indicate that molecules exhibit a regular mode of attachment (via a Si-X bond, X = O, S, or Se), relatively homogeneous surface organization, and robust reversible electrochemical behavior. The acetyl protecting group undergoes cleavage during the surface deposition process, enabling attachment to silicon via thio or seleno groups without handling free thiols or selenols.     

MoO3、NiO、ZnO在小表面金红石上的分散行为

Dispersion of MoO3, NiO, ZnO on rutile TiO2 with low specific surface area was studied with Mercury Porosimeter, SEM, XPS and Ammonia Extraction method. The dispersion thresholds of MoO3, NiO, ZnO on three rutile TiO2 carriers were obtained with XPS, and com-pared with those on anatase TiO2 with high specific surf are area. Ammonia Extraction method was used to identify the surface oxide species interarting with support surface in different strength and it was found that the proportions of oxides that can not be extracted by ammonia extraction are different for MoO3, NiO and ZnO which are supported on rutile TiO2.     

Chiral imides as potential chiroptical switches: synthesis and optical properties

A series of chiral aromatic imides and diimides were synthesized and their electrochemical, absorption, fluorescent, and chiroptical properties were examined for their potential application as molecular chiroptical switches. These compounds exhibit strong UV-vis absorptions, and can be electrochemically reduced to radical anions that absorb in the near infrared (NIR) region. Further reduction to the dianionic states results in new absorptions in the visible region. The changes in circular dichroism upon redox switching were apparent in the UV-vis region but were absent in the NIR region.     

Three new lanthanide coordination polymers containing isophthalate and 1,10-phenanthroline

Three lanthanide coordination polymers were prepared by hydrothermal synthesis and characterized by single-crystal X-ray diffraction. [Pr₂(mBDC)₃(phen)(H₂O)]_n·0.5nH₂O (1) (mBDC=isophthalate, phen=1,10-phenanthroline) exhibits two kinds of metal environments (coordination numbers 7 and 8). In complex 1, mBDC ligands adopt the tetradentate (bridging and bridging) coordination mode and connect Pr ions into an undulating layer, and a 3D supramolecular structure is formed via hydrogen bonds between adjacent layers. [Tb₄(mBDC)₆(phen)]_n (2) has three types of metal environments (coordination numbers 6, 7 and 8) and is composed of a 3D network formed by mBDC linking Tb ions via tetradentate (bridging and bridging) and pentadentate (bridging/chelating and bridging) coordination modes. There are two kinds of small quadrilateral channels along the a-axis. [Er₄(mBDC)₆(phen)]_n (3) is isostructural to complex 2.     

Self-assembling of helical poly(phenylacetylene) carrying L-valine pendants in solution, on mica substrate, and on water surface

In the present work, we investigated self-assembling of a poly(phenylacetylene) carrying L-valine pendants (PPA-Val) in a water/methanol solution, upon evaporation of the solution on mica, and on the water surface. With intercalation of a fluorescence probe of Ru(phen)2(dppx)2+ (phen = 1,10-phenanthroline, dppx=7,8-dimethyldipyridophenazine) into the hydrophobic cavities associated by the PPA-Val chains, their helical structures were directly detected in solution with an in situ fluorescence microscope. Helical aggregates were observed with AFM upon evaporation of the solvents, suggesting that the helical structures in the solution are the building blocks of the helical aggregates. Self-assembling structures of PPA-Val on the water surface were, however, very different from that formed upon evaporation of its THF solution on the mica surface. The polymer chains associated into a monolayer of extended fibers on the water surface, whereas superhelical fibers formed on the mica surface. Water molecules play a critical role in inducing the polymer to form diverse morphological structures in its bulk solution and on its surface. In solution, the isotropic hydrophobic effect drove the polymer chains to form superhelical aggregates, while on the water surface, the hydrophobic effect concentrated mainly on the lateral part of the polymer, thus giving a monolayer of extended fibers.