A photo-oxidation procedure using UV radiation/H2O2 for decomposition of wine samples — Determination of iron and manganese content by flame atomic absorption spectrometry

This paper proposes the use of photo-oxidation with UV radiation/H₂O₂ as sample pretreatment for the determination of iron and manganese in wines by flame atomic absorption spectrometry (FAAS). The optimization involved the study of the following variables: pH and concentration of buffer solution, concentrated hydrogen peroxide volume and irradiation time. The evaluation of sample degradation was monitored by measuring the absorbance at the maximum wavelength of red wine (530 nm). Using the experimental conditions established during the optimization (irradiation time of 30 min, oxidant volume of 2.5 mL, pH 10, and a buffer concentration of 0.15 mol L^− 1), this procedure allows the determination of iron and manganese with limits of detection of 30 and 22 μg L^− 1, respectively, for a 5 mL volume of digested sample. The precision levels, expressed as relative standard deviation (RSD), were 2.8% and 0.65% for iron and 2.7% and 0.54% for manganese for concentrations of 0.5 and 2.0 mg L^− 1, respectively. Addition/recovery tests for evaluation of the accuracy were in the ranges of 90%–111% and 95%–107% for iron and manganese, respectively. This digestion procedure has been applied for the determination of iron and manganese in six wine samples. The concentrations varied from 1.58 to 2.77 mg L^− 1 for iron and from 1.30 to 1.91 mg L^− 1 for manganese. The results were compared with those obtained by an acid digestion procedure and determination of the elements by FAAS. There was no significant difference between the results obtained by the two methods based on a paired t-test (at 95% confidence level).     

51V NMR chemical shifts calculated from QM/MM models of vanadium chloroperoxidase

(51)V NMR chemical shifts calculated from QM/MM-optimized (QM=quantum mechanical; MM=molecular mechanical) models of vanadium-dependent chloroperoxidase (VCPO) are presented. An extensive number of protonation states for the vanadium cofactor (active site of the protein) and a number of probable positional isomers for each of the protonation states are considered. The size of the QM region is increased incrementally to observe the convergence behavior of the (51)V NMR chemical shifts. A total of 40 models are assessed by comparison to experimental solid-state (51)V NMR results recently reported in the literature. Isotropic chemical shifts are found to be a poor indicator of the protonation state; however, anisotropic chemical shifts and the nuclear quadrupole tensors appear to be sensitive to changes in the proton environment of the vanadium nuclei. This detailed investigation of the (51)V NMR chemical shifts computed from QM/MM models provides further evidence that the ground state is either a triply protonated (one axial water and one equatorial hydroxyl group) or a doubly protonated vanadate moiety in VCPO. Particular attention is given to the electrostatic and geometric effects of the protein environment. This is the first study to compute anisotropic NMR chemical shifts from QM/MM models of an active metalloprotein for direct comparison with solid-state MAS NMR data. This theoretical approach enhances the potential use of experimental solid-state NMR spectroscopy for the structural determination of metalloproteins.     

The structure of the homogeneous oxidation catalyst, Mn(II)(Br(-1))x, in supercritical water: an X-ray absorption fine-structure study

Extended X-ray absorption fine structure (EXAFS) and X-ray absorption near edge structure (XANES) spectroscopies were used to probe the first-shell coordination structure about Mn(II) and Br(-1) ions that exist as contact ion pairs in supercritical water. This work was performed to clarify why solutions of MnBr2 in supercritical water are known to effectively catalyze the aerobic oxidative synthesis of terephthalic acid from p-xylene as well as a number of other methylaromatic compounds. The Mn and Br K-edge spectra were collected at the bending magnet beamline (sector 20) at the Advanced Photon Source, Argonne National Laboratory. The first-shell coordination structure about the Mn(II) ion changes from octahedral at ambient conditions to tetrahedral at supercritical conditions. Under supercritical conditions, the measured bond distances of Mn-OH2 and Mn-Br are 2.14 and 2.46 A, respectively. Direct contact ion pairs form with about 2 Br(-1) ions present in the first coordination shell of the Mn(II) ion. The structure of dissolved MnBr2, below 1.0 m, changes from essentially [Mn(II)(H2O)6]+2 to [Mn(II)(H2O)2(Br(-1))2] in supercritical water (scH2O). When an excess of Br(-1) ion is added, the bromide coordination number increases and the number of water molecules decreases. The results show that the initial MnBr2 catalyst in scH2O is tetrahedral with two Mn-Br contact ion pairs. The presence of the acetate anion deactivates the catalyst by formation of insoluble MnO.     

Electronic structure of Li-intercalated oligopyridines: a comparative study by photoelectron spectroscopy

The role of nitrogen in the charge transfer and storage capacity of lithium-intercalated heterocyclic oligophenylenes was investigated using photoelectron spectroscopy. The development of new occupied states at low binding energies in the valence band region, as well as core level chemical shifts at both carbon and nitrogen sites, demonstrates partial charge transfer from lithium atoms to the organic component during formation of the intercalated compound. In small compounds, i.e., biphenyl and bipyridine derivatives, the position of the nitrogen heteroatom significantly affects the spacing between gap states in the Li-intercalated film; yet it has minimal effects on the charge storage capacity. In larger, branched systems, the presence of nitrogen in the aromatic system significantly enhances the charge storage capacity while the Li-N bond strength at high intercalation levels is significantly weakened relative to the nitrogen-free derivative. These observations have strong implications towards improved deintercalation processes in organic electrodes in lithium-ion batteries.     

First-principles calculations of 17O nuclear magnetic resonance chemical shielding in Pb(Zr(1/2)Ti(1/2))O3 and Pb(Mg(1/3)Nb(2/3))O3: linear dependence on transition-metal/oxygen bond lengths

First-principles density functional theory oxygen chemical shift tensors were calculated for A(B,B')O(3) perovskite alloys Pb(Zr(1/2)Ti(1/2))O(3) (PZT) and Pb(Mg(1/3)Nb(2/3))O(3) (PMN). Quantum chemistry methods for embedded clusters and the gauge including projector augmented waves (GIPAW) method [C. J. Pickard and F. Mauri, Phys. Rev. B 63, 245101 (2001)] for periodic boundary conditions were used. Results from both methods are in good agreement for PZT and prototypical perovskites. PMN results were obtained using only GIPAW. Both isotropic δ(iso) and axial δ(ax) chemical shifts were found to vary approximately linearly as a function of the nearest-distance transition-metal/oxygen bond length, r(s). Using these results, we argue against Ti clustering in PZT, as conjectured from recent (17)O NMR magic-angle-spinning measurements. Our findings indicate that (17)O NMR measurements, coupled with first-principles calculations, can be an important probe of local structure in complex perovskite solid solutions.     

The effects of lignin removal and drying on the porosity and enzymatic hydrolysis of sugarcane bagasse

The porosity of lignocellulosic materials is a key feature for the enzymatic hydrolysis of the constituent polysaccharides, being affected by its drying and lignin content. Here we evaluated the influence of both parameters in the porosity of sugarcane bagasse, using raw and chlorite-delignified samples. A fraction of these samples was air dried at room temperature and the remainder one was kept wet. All the samples were subjected to porometry (solute exclusion technique), determination of water retention value and assessment of enzymatic saccharification of polysaccharides. Samples with higher lignin contents had lower porosities and exhibited worse enzymatic conversions of polysaccharides. Mild drying collapsed only the smaller pores, which already were inaccessible to enzymes, and therefore did not affect the efficiencies of saccharification. Our results show that the lignin content plays an important role in the porosity of the material and that its removal improves the enzymatic saccharification of the constituent polysaccharides.     

Die Hydrolyse von Phospholinsäureamiden

Hydrolysis of Amides of Phospholinic Acid The acid catalysed hydrolysis of (= OAP, R = organic substituent) has been investigated kinetically. Provided the pH remains constant, the hydrolysis is a first order reaction. From the temperature dependance of the rate constant the activation energy E_a as well as the thermodynamic data ΔH* and ΔS* have been calculated. In comparison to the compound with R = H aromatic substituents and additional the t-butyl group enhance E_a whilst aliphatic substituents included the benzyl group diminish E_a. The first step of the reaction is a protonation at the oxygen or nitrogen resulting in the formation of an equilibrium. After the determination of the basicity constant K_A of some OAPs it was possible to calculate the respective rate constants of the rate determining step of the reactions and the corresponding thermodynamic data E_F, ΔH and ΔS. It is assumed that the mechanism of the hydrolysis takes place according to the same scheme which has been assumed for the hydrolysis of cyclic esters of the phosphinic acid by Ugi [1] and colaborators.     

Fabrication of nanoscale metallic spirals using phospholipid microtubule organizational templates

We describe the fabrication of metallic Cu spiral/helical nanostructures prepared via selective electroless metallization of a phospholipid microtubule template. The metallization template is created through selective, sequential adsorption of the oppositely charged polyelectrolytes, sodium poly(styrenesulfonate) (PSS) and poly(ethyleneimine) (PEI), onto nanoscale seams naturally occurring on the microtubule surface. A negatively charged Pd(II) nanoparticle catalyst is bound to the terminal cationic PEI layer of the multilayer film and initiates selective template metallization to form the helical Cu nanostructures. Details of the process are presented, and a mechanism and factors affecting the control of the feature critical dimensions are discussed.     

Reference Energies in Semiempirical Parametrizations

The MNDO scheme has been reparametrized for hydrocarbons using both molecular binding energies and heats of formation at 0 K as experimental reference data. Compared with MNDO, there are only minor changes in the optimized parameters, and the results are essentially of the same accuracy. These tests justify the use of heats of formation at 298 K as reference data in the original MNDO parametrization.     

Analysis, purification and properties of a 50,000-dalton membrane-associated phosphoprotein from human platelets

Recently, the development of a monospecific antiserum against a 46,000/50,000-dalton membrane protein from human platelets which was stoichiometrically and reversibly phosphorylated in intact human platelets in response to vasodilators was reported. Using this antiserum, the subcellular distribution and the purification of this vasodilator-stimulated phosphoprotein (VASP) from human platelets has now been analysed. The VASP of human platelets is primarily a membrane-associated protein and can be purified to apparent homogeneity by salt extraction and sequential ion-exchange and dye-ligand chromatography with a purification factor of 1200 and a yield of 13%. Sodium dodecyl sulphate-polyacrylamide gel electrophoresis under reducing and non-reducing conditions indicated that purified monomers of this VASP are linked by interchain disulphide bonding.