Unprecedented alkene complex of zinc(II): structures and bonding of divinylzinc complexes

This report describes the solid-state structures of a series of divinylzinc complexes, one of which represents the only structurally characterized zinc(II) pi-complex. Vinylzinc reagents, Zn[C(Me)=CH2]2 (1) and Zn[C(H)=CMe2]2 (2), have been synthesized and isolated as white crystalline solids in 66 and 72% yield, respectively. Each compound exhibits an infinite polymeric architecture in the solid state via a series of zinc-pi (1) and zinc-sigma-bonded (2) bridging interactions. Addition of chelating ligands to these divinylzinc compounds allowed isolation of the monomeric adducts (bipy)Zn[C(Me)=CH2]2 (1.bipy), (tmeda)Zn[C(Me)=CH2]2 (1*tmeda), (bipy)Zn[C(H)=CMe2]2 (2*bipy), and (tmeda)Zn[C(H)=CMe2]2 (2*tmeda), of which 1*bipy, 2*bipy, and 2*tmeda have been characterized crystallographically.     

Ellipsometry and Infrared Reflection Absorption Spectroscopy of Adsorbed Layers of Soluble Surfactants at the Air-Water Interface

Optical techniques play an increasingly important role in the characterization of microstructure and surface densities of thin films at various interfaces. In this study, ellipsometry and infrared reflection absorption spectroscopy (IRRAS) were used for determining the surface densities of adsorbed layers of cationic surfactants in situ at the air-water interface. The surfactants were N(alpha)-lauroyl-arginine methyl ester (LAM) and N(alpha), N(omega)-bis(N(alpha)-lauroyl-arginine)-alpha,omega-alkylidenediamide (C(6)(LA)(2)). In ellipsometry, the ellipsometric phase angle Delta was obtained at various surfactant concentrations and was referenced to that of the solvent. Three algorithms were used for analyzing the data. The surface densities are 3.3+/-0.3x10(-6) mol/m(2) at 1 mM for LAM and 1.5+/-0.3x10(-6) mol/m(2) at 0.1 mM for C(6)(LA)(2) by using an algorithm for which the monolayer thickness was estimated from molecular modeling. The corresponding surface densities from literature surface tension data and the Gibbs adsorption isotherm procedure are 2.2+/-0.4x10(-6) mol/m(2) and 1.2+/-0.2x10(-6) mol/m(2), respectively. In addition, IRRAS spectra were obtained from monolayers of LAM and C(6)(LA)(2) at the air-water interface. The frequencies of the methylene stretching vibration bands indicate that the monolayers are liquid-like. The surface densities were determined from the reflectance-absorbance data by using the model of either an isotropic film or an anisotropic film on the aqueous subphase. The IRRAS-based surface densities from either model, by using DPPC monolayers for calibration, are 2.4+/-0.7x10(-6) mol/m(2) at 1 mM for LAM and 1.5+/-0.6x10(-6) mol/m(2) at 0.1 mM for C(6)(LA)(2), which are in fair agreement with the ellipsometry- and the surface-tension-based surface densities. Copyright 2001 Academic Press.     

Time-resolved gas-phase kinetic and quantum chemical studies of the reaction of silylene with nitric oxide

Time-resolved kinetic studies of the reaction of silylene, SiH2, generated by laser flash photolysis of phenylsilane, have been carried out to obtain rate constants for its bimolecular reaction with NO. The reaction was studied in the gas phase over the pressure range 1-100 Torr in SF6 bath gas at five temperatures in the range 299-592 K. The second-order rate constants at 10 Torr fitted the Arrhenius equation log(k/cm3 molecule(-1) s(-1)) = (-11.66 +/- 0.01) + (6.20 +/- 0.10 kJ mol(-1))/RT ln 10 The rate constants showed a variation with pressure of a factor of ca. 2 over the available range, almost independent of temperature. The data could not be fitted by RRKM calculations to a simple third body assisted association reaction alone. However, a mechanistic model with an additional (pressure independent) side channel gave a reasonable fit to the data. Ab initio calculations at the G3 level supported a mechanism in which the initial adduct, bent H2SiNO, can ring close to form cyclo-H2SiNO, which is partially collisionally stabilized. In addition, bent H2SiNO can undergo a low barrier isomerization reaction leading, via a sequence of steps, ultimately to dissociation products of which the lowest energy pair are NH2 + SiO. The rate controlling barrier for this latter pathway is only 16 kJ mol(-1) below the energy of SiH2 + NO. This is consistent with the kinetic findings. A particular outcome of this work is that, despite the pressure dependence and the effects of the secondary barrier (in the side reaction), the initial encounter of SiH2 with NO occurs at the collision rate. Thus, silylene can be as reactive with odd electron molecules as with many even electron species. Some comparisons are drawn with the reactions of CH2 + NO and SiCl2 + NO.     

Apparent two-dimensional behavior of TiO2 nanotubes revealed by light absorption and luminescence

Optical absorption and photoluminescence (PL) properties of colloidal TiO(2) nanotubes, produced by the alkali hydrothermal method, were studied at room temperature in the range 300-700 nm. Nanotubes having an internal diameter in the range 2.5-5 nm have very similar optical properties, in contrast to the expected behavior for quasi-1-D systems. This is explained by the complete thermal smearing of all 1-D effects, due to the large effective mass of charge carriers in TiO(2), resulting in an apparent 2-D behavior of TiO(2) nanotubes.     

Adsorption of sterically stabilized latex particles at liquid surfaces: effects of steric stabilizer surface coverage, particle size, and chain length on particle wettability

A series of five near-monodisperse sterically stabilized polystyrene (PS) latexes were synthesized using three well-defined poly(glycerol monomethacrylate) (PGMA) macromonomers with mean degrees of polymerization (DP) of 30, 50, or 70. The surface coverage and grafting density of the PGMA chains on the particle surface were determined using XPS and (1)H NMR spectroscopy, respectively. The wettability of individual latex particles adsorbed at the air-water and n-dodecane-water interfaces was studied using both the gel trapping technique and the film calliper method. The particle equilibrium contact angle at both interfaces is relatively insensitive to the mean DP of the PGMA stabilizer chains. For a fixed stabilizer DP of 30, particle contact angles were only weakly dependent on the particle size. The results are consistent with a model of compact hydrated layers of PGMA stabilizer chains at the particle surface over a wide range of grafting densities. Our approach could be utilized for studying the adsorption behavior of a broader range of sterically stabilized inorganic and polymeric particles of practical importance.     

Detection of atmospheric nitrogen dioxide using a miniaturised fibre-optic spectroscopy system and the ambient sunlight

A miniaturised fibre-optic spectrometer based system is presented for direct detection of one of the major atmospheric pollutants, nitrogen dioxide, by absorption spectroscopy using the ambient sunlight as light source. The detection system consists of a 10 cm collimator assembly, a fibre-optic cable and a portable diode-array spectrometer. The absorbance spectrum of the open-path is calculated using a reference spectrum recorded when the nitrogen dioxide (NO2) concentration in the atmosphere is low. The relative concentration of the pollutant is calculated normalising the detected spectra and subtracting the background broadband spectrum from the specific NO2 absorbance features, since the broadband spectrum changes according to atmospheric conditions and solar intensity. Wavelengths between 400 and 500 nm are used in order to maximise sensitivity and to avoid interference from other species. Calibration is carried out using Tedlar sample bags of known concentration of the pollutant. A commercial differential optical absorption spectroscopy (DOAS) system is used as a reference standard detection system to compare the results with the new system. Results show that detection of NO2 at typical urban atmospheric levels has been achieved using an inexpensive field based fibre-optic spectrometer and a readily available, easy to align, light source. In addition the new system can be used to get a semi-quantitative estimation of the nitrogen dioxide concentration within errors of 20%. While keeping the typical benefits of open-path techniques, the new system has important advantages over them such as cost, simplicity and portability.     

A highly sensitive method for quantification of myosin light chain phosphorylation by capillary isoelectric focusing with laser-induced fluorescence detection

Activation of myosin II by phosphorylation of the 20 kDa regulatory light chains (LC20) has been implicated in numerous contractile and motile events, e.g., smooth muscle contraction, cytokinesis, and cell migration. The ability to analyze LC20 phosphorylation in minute samples is critical to determine the importance of LC20 phosphorylation in diverse physiological processes. We have developed a method for the separation and quantification of unphosphorylated, monophosphorylated, and diphosphorylated LC20 with a detection limit of 1 pg (50 amol). LC20 is initially isolated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and transblotted to a polyvinlyidene difluoride (PVDF) membrane. The region of the membrane containing the LC20 band (identified by electrophoresis of purified LC20 in a neighboring lane) is cut out and fluorescently labeled with Alexa Fluor 488 C5 maleimide. The labeled LC20 is eluted from the membrane with detergent and subjected to capillary isoelectric focusing (CIEF) to separate unphosphorylated, mono-, and diphosphorylated LC20, which are detected and quantified by laser-induced fluorescence (LIF). A linear relationship between log(peak area) and log(LC20 amount) is observed over the range of 50 amol-150 fmol. Quantification of LC20 phosphorylation by CIEF with LIF detection was compared with three commonly used methods with much lower levels of sensitivity: urea/glycerol-PAGE with Western blotting, phosphorylation by [gamma-32P]ATP with Cerenkov counting, and phosphorylation by [gamma-32P]ATP followed by SDS-PAGE, autoradiography, and scanning densitometry. All four methods gave very similar quantitative results, the major difference being that the new method exhibits 3000-fold enhanced sensitivity. This method is therefore applicable to quantitative analysis of phosphorylation of minute quantities of LC20.     

Processes associated with ionic current rectification at a 2D-titanate nanosheet deposit on a microhole poly(ethylene terephthalate) substrate

Films of titanate nanosheets (approx. 1.8-nm layer thickness and 200-nm size) having a lamellar structure can form electrolyte-filled semi-permeable channels containing tetrabutylammonium cations. By evaporation of a colloidal solution, persistent deposits are readily formed with approx. 10-μm thickness on a 6-μm-thick poly(ethylene-terephthalate) (PET) substrate with a 20-μm diameter microhole. When immersed in aqueous solution, the titanate nanosheets exhibit a p.z.c. of − 37 mV, consistent with the formation of a cation conducting (semi-permeable) deposit. With a sufficiently low ionic strength in the aqueous electrolyte, ionic current rectification is observed (cationic diode behaviour). Currents can be dissected into (i) electrolyte cation transport, (ii) electrolyte anion transport and (iii) water heterolysis causing additional proton transport. For all types of electrolyte cations, a water heterolysis mechanism is observed. For Ca²⁺ and Mg²⁺ions, water heterolysis causes ion current blocking, presumably due to localised hydroxide-induced precipitation processes. Aqueous NBu₄⁺ is shown to ‘invert’ the diode effect (from cationic to anionic diode). Potential for applications in desalination and/or ion sensing are discussed.

     

Analysis and deconvolution of dimethylnaphthalene isomers using gas chromatography vacuum ultraviolet spectroscopy and theoretical computations

An issue with most gas chromatographic detectors is their inability to deconvolve coeluting isomers. Dimethylnaphthalenes are a class of compounds that can be particularly difficult to speciate by gas chromatography – mass spectrometry analysis, because of their significant coelution and similar mass spectra. As an alternative, a vacuum ultraviolet spectroscopic detector paired with gas chromatography was used to study the systematic deconvolution of mixtures of coeluting isomers of dimethylnaphthalenes. Various ratio combinations of 75:25; 50:50; 25:75; 20:80; 10:90; 5:95; and 1:99 were prepared to test the accuracy, precision, and sensitivity of the detector for distinguishing overlapping isomers that had distinct, but very similar absorption spectra. It was found that, under reasonable injection conditions, all of the pairwise overlapping isomers tested could be deconvoluted up to nearly two orders of magnitude (up to 99:1) in relative abundance. These experimental deconvolution values were in agreement with theoretical covariance calculations performed for two of the dimethylnaphthalene isomers. Covariance calculations estimated high picogram detection limits for a minor isomer coeluting with low to mid-nanogram quantity of a more abundant isomer. Further characterization of the analytes was performed using density functional theory computations to compare theory with experimental measurements. Additionally, gas chromatography – vacuum ultraviolet spectroscopy was shown to be able to speciate dimethylnaphthalenes in jet and diesel fuel samples.     

Synthesis of Indoles through Domino Reactions of 2‐Fluorotoluenes and Nitriles

Indoles are essential heterocycles in medicinal chemistry, and therefore, novel and efficient approaches to their synthesis are in high demand. Among indoles, 2‐aryl indoles have been described as privileged scaffolds. Advanced herein is a straightforward, practical, and transition‐metal‐free assembly of 2‐aryl indoles. Simply combining readily available 2‐fluorotoluenes, nitriles, LiN(SiMe₃)₂, and CsF enables the generation of a diverse array of indoles (38 examples, 48–92 % yield). A range of substituents can be introduced into each position of the indole backbone (C4 to C7, and aryl groups at C2), providing handles for further elaboration.