On the degradation and stability of high abrasion furnace black (HAF)/acrylonitrile butadiene rubber (NBR) and high abrasion furnace black (HAF)/graphite/acrylonitrile butadiene rubber (NBR) under cyclic stress-strain

Acrylonitrile butadiene rubber (NBR) compounds filled with 40 phr of high abrasion furnace black (HAF) and HAF (20 phr)/graphite (20 phr) were experimentally investigated. The stress-strain curves of the composites were studied, which are described by applying Ogden's model. The effect of cyclic fatigue and hysteresis was also examined. The dissipation energy that indicates the vibration damping capacity for all samples was determined. A continuum damage model is used to investigate the fatigue damage behavior for elastomers. Experiments on the cyclic fatigue of a carbon-filled NBR rubber and carbon/graphite filled NBR rubber were conducted to determine the relation between the number of cyclic fatigue and the strain amplitude. The results indicate that the theoretical formula for the number of cyclic fatigue as a function of the strain amplitude, derived from the damage model, can describe experimental data for the prepared samples very well.     

Bacterial cellulose-MMTs nanoreinforced composite films: novel wound dressing material with antibacterial properties

This study was conducted to develop nanocomposite films of bacterial cellulose (BC) and montmorillonite (MMT) with potent antibacterial activity and potential therapeutic value in wound healing and tissue regeneration. Different composites were prepared through impregnation of BC sheets with 2 and 4 % suspensions of MMT, Na-MMT, Ca-MMT and Cu-MMT. These modified MMTs were prepared through cation exchange strategy. The antibacterial activities of the composites were then assessed against Escherichia coli and Staphylococcus aureus through the disc diffusion assay and colony forming unit (CFU) count methods. BC-Cu-MMT composites prepared with 2 and 4 % MMT displayed clear zones of inhibition against E. coli (20 and 22 mm, respectively) and S. aureus (19 and 20.5 mm, respectively). The untainted BC, BC-MMT, BC-Na-MMT and BC-Ca-MMT did not show clear inhibitory zones against the tested organisms. The reduction in CFU observed following treatment with BC-MMTs (BC-MMT, BC-Na-MMT, BC-Ca-MMT and BC-Cu-MMT) prepared using 2 % MMTs suspension was 7.39, 14.8, 19.2 and 77.9 % for E. coli and 6.8, 13.7, 17.4 and 74.1 %, for S. aureus, respectively. When treated with BC-MMT, BC-Na-MMT, BC-Ca-MMT and BC-Cu-MMT prepared with 4 % MMTs suspension, the reduction in CFU increased to 10.58, 18.37, 24.62 and 85.01 % for E. coli and 9.44, 15.73, 20.40 and 79.79 % for S. aureus, respectively. The outcome of this study will facilitate the development of BC sheets as wound dressings and regeneration materials with antibacterial properties for therapeutic applications without any side effects.     

Temperature-induced phase transition; Polymorphism in BP2 SAMs on Au(111)

Self-assembled monolayers (SAMs) of ω-(4′-methylbiphenyl-4-yl)ethanethiol (CH₃(C₆H₄)₂(CH₂)₂SH, BP2) prepared at different temperatures on Au(111) substrates were investigated using scanning tunneling microscopy (STM). Also, the effect of the incubation time of the gold substrate in the thiol solution was examined. The STM results showed that samples prepared at room temperature were significantly different from those prepared at elevated temperatures in their surface morphology, space group and size of unit cell. The micrographs of samples prepared at higher temperatures revealed a pronounced and progressive increase in the size of the well-known etch-pits at the expense of their density with increasing preparation temperature (but the increase did not continue for SAMs prepared at 348 K). The average domain size was found to increase significantly with increasing preparation temperature. In addition, polymorphism was observed in BP2 SAMs at all investigated temperatures. This study has demonstrated that solution temperature and incubation time are key factors controlling the two-dimensional SAM structure of BP2 molecules.      

Evaluation and modeling of the mechanical properties of graphite nanoplatelets based rubber nanocomposites for pressure sensing applications

Acrylonitrile butadiene rubber (NBR) compounds filled with different concentrations of graphite nanoplatelets were experimentally investigated. The stress–strain curves of the nanocomposites were studied, which suggest good filler–matrix adhesion. The large reinforcement effect of the filler followed the Guth model for non‐spherical particles. The effect of graphite nanoplatelets on the cyclic fatigue and hysteresis was also examined. The loading and unloading stress–strain relationships for any cycle were described by applying Ogden's model for rubber nanocomposites. With this model for incompressible materials, expressions may be developed to predict the stress–strain relationship for any given cycle. The dissipated energy increased with graphite nanoplatelets concentrations and decrease with number of cycles. The rate of damage accumulation becomes marginal after first ten cycles. The rate of damage increases as the amount of graphite nanoplatelets increase into the rubber matrix. Copyright © 2011 John Wiley & Sons, Ltd.     

The temporal evolution of the structure and luminescence properties of CdSe semiconductor quantum dots grown at low temperatures

Mono-dispersed CdSe quantum dots have been prepared by water based route using 2-mercaptoethanol at low temperatures. The structures of the CdSe nanocrystals were investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM) and high-resolution transmission electron microscopy (HRTEM). The XRD pattern showed that the prepared CdSe has a cubic phase with zinc blende structure. The temporal evolution of the absorption and photoluminescence spectra was used to follow the reaction process and to characterize the optical properties of the prepared CdSe quantum dots. The results exhibited clear exciton peaks in the absorption spectra. The influence of the temperature and/or time of reaction on the properties of the CdSe nanocrystals were investigated. It is found that the size of CdSe nanoparticles increases, as the reaction temperature and/or time are increased. The results showed that the Stokes shift between photoluminescence emission peak and absorption peaks is increased with the increase of the reaction temperature.     

Synthesis of CdZnO thin film as a potential candidate for optical switches

Cadmium doped zinc oxide thin films have been prepared using a thermal decomposition technique. The influence of Cd as a doping agent on the structure, optical and nonlinear optical properties was carefully investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM) and a UV-vis spectrophotometer. A deep correlation has been found between the surface roughness and the optical properties. The roughness is found to deteriorate the nonlinear response, such that the highest nonlinear susceptibility χ⁽³⁾ is obtained for the smoothest layer. The third-order nonlinear susceptibility χ⁽³⁾ has been calculated using the Frumer model, and is estimated to be 3.37×10⁻¹⁰ esu. The dispersion of the refractive index of the prepared thin film is shown to follow the single electronic oscillator model. From the model, the values of oscillator strength (E_d), oscillator energy (E_o) and dielectric constant (ε_∞) have been determined. The conductivity has been measured as a function of the energy of the photons, revealing marginal change at energies below 3.15 eV, while above this value there is a large increase in the conductivity. This suggests that CdZnO is a potential candidate for applications in optical devices such as optical limiter and optical switching.     

Approximate analytical solution of fourth order boundary value problems

In this paper, the decomposition method is applied to boundary-value problems of fourth order for ordinary differential equations. AMS subject classification 65L10, 65L20, 34B15Waleed Al-Hayani: He was a professor in the Department of Mathematics, College of Science, Mosul University, Mosul, Iraq.     

Neonatal EEG signal characteristics using time frequency analysis

Time-frequency analysis is a way to represent the energy contents of a signal in the joint time-frequency domain. It provides a good visual way to separate the frequency contents of a multi-component signal, and display the changes of these components with respect to time. This paper outlines investigative work on neonatal EEG signals using time-frequency analysis. The Cohen’s class distributions are discussed, and kernel optimisation for the Cohen’s class distributions is outlined. Segments of EEG with different background continuity states are analysed using a Cohen’s class distribution, and their characteristics are discussed. Through this paper, interesting information that offers insight towards the EEG signal can be visualized from the time frequency analysis.     

Synthesis and optical properties of poly (vinyl acetate)/bismuth oxide nanorods

Poly (vinyl acetate) (PVAc) loaded bismuth oxide (Bi₂O₃) nanorods were successfully prepared at ambient pressure. X‐ray diffraction (XRD) and transmission electron microscopy were used to characterize the final product. It was found that Bi₂O₃ nanorods were formed and the diameter of the rods was confined to about 8 nm. The diameter and length of formed rods were found to increase by increasing the bismuth oxide concentration in the PVAc matrix. The optical properties of the nanocomposite films were characterized from the analysis of the experimentally recorded transmittance and reflectance data in the spectral wavelength range of 300–800 nm. The values of some important parameters of the studied films are determined such as refractive index (n), extinction coefficient (k), optical absorption coefficient (α), and band energy gap (E_g). According to the analysis of dispersion curves, it has been found that the dispersion data obeyed the single oscillator of the Wemple–DiDomenico model, from which the dispersion parameters and high‐frequency dielectric constant were determined. In such work, from the transmission spectra, the dielectric constant (ε_∞) and the third‐order optical nonlinear susceptibility χ⁽³⁾ were determined. Copyright © 2010 John Wiley & Sons, Ltd.     

Discovery,Synthesis and Evaluation of a Ketol-Acid Reductoisomerase Inhibitor

Ketol-acid reductoisomerase (KARI), the second enzyme in the branched-chain amino acid biosynthesis pathway, is a potential drug target for bacterial infections including Mycobacterium tuberculosis. Here, we have screened the Medicines for Malaria Venture Pathogen Box against purified M. tuberculosis (Mt) KARI and identified two compounds that have K_i values below 200 nm . In Mt cell susceptibility assays one of these compounds exhibited an IC₅₀ value of 0.8 μm . Co-crystallization of this compound, 3-((methylsulfonyl)methyl)-2H-benzo[b][1,4]oxazin-2-one (MMV553002), in complex with Staphylococcus aureus KARI, which has 56 % identity with Mt KARI, NADPH and Mg²⁺ yielded a structure to 1.72 Å resolution. However, only a hydrolyzed product of the inhibitor (i.e. 3-(methylsulfonyl)-2-oxopropanic acid, missing the 2-aminophenol attachment) is observed in the active site. Surprisingly, Mt cell susceptibility assays showed that the 2-aminophenol product is largely responsible for the anti-TB activity of the parent compound. Thus, 3-(methylsulfonyl)-2-oxopropanic acid was identified as a potent KARI inhibitor that could be further explored as a potential biocidal agent and we have shown 2-aminophenol, as an anti-TB drug lead, especially given it has low toxicity against human cells. The study highlights that careful analysis of broad screening assays is required to correctly interpret cell-based activity data.