<Emphasis Type="Italic">Yarrowia lipolytica</Emphasis> application as a prospective approach for biosynthesis of pyruvic acid from glycerol

With the problems related to chemical methods of pyruvic acid (PA) synthesis, a fast-growing interest has been observed in research aiming at reducing the production cost of PA by applying biotechnological methods. This study aimed to investigate the potential applicability of Yarrowia lipolytica Wratislavia 1.31 yeast strain for valorisation of pure and crude glycerol through the production of industrially desired PA. Conditions required for the effective PA biosynthesis, i.e., pH value, thiamine concentration, agitation, and substrate concentration, were examined in batch and fed-batch cultivation modes. The efficient production of PA occurred under the limitation of thiamine (1 µg L^?1) and was stimulated by moderate pH (4.5) and agitation (800 rev min^?1) of the culture. Under optimal conditions, Y. lipolytica Wratislavia 1.31 was able to produce 85.2 g L^?1 of PA with volumetric productivity of 0.90 g L^?1 h^?1. The yield of PA biosynthesis reached a high level of 1.03 g g^?1. Obtained results confirmed the aptitude of Y. lipolytica yeast to produce high amounts of PA from simple glycerol-containing media. Presented process was very promising and might be considered as an attractive alternative for currently used chemical methods of PA synthesis.     

THERMAL GENERATION OF ELECTRONICALLY EXCITED STATES BY α-PEROXYLACTONES: ACTIVATION PARAMETERS AND EXCITATION YIELDS AS A FUNCTION OF α-DEUTERATION*

Abstract— The kinetics and the direct, the 9,10-dibromo- (DBA) and the 9,10-diphenylanthracene- (DPA) enhanced chemiluminescence of tert-butyl α-peroxylactone 1, with and without α-deuteration, was investigated in order to probe the mechanism of direct chemiexcitation by these hyperenergetic molecules. The small secondary isotope effect on the rates and activation parameters suggests that a diradical mechanism is obtained. The partitioning of the diradical intermediate into excited vs ground state product and the yield of triplet excited product are moderately (ca. 5-fold) increased by α-deuteration, but the singlet yield is unaffected. A convenient and useful chemiluminescence method for the determination of fluorescence quantum yields has been developed.     

The complexes of tetramethylresorc[4]arene with amines. Effect of the amine concentration on the complex composition

The complexation of tetramethylresorc[4]arene with primary and secondary amines in acetonitrile was investigated spectrophotometrically. The stoichiometry of the complexes formed was shown to depend on the amine concentration. Based on the proposed complexation models, the formation constants of the complexes as well as their thermodynamical parameters were determined and discussed. Depending on the amine concentration, two types of solid complexes of tetramethylresorc[4]arene with amines were obtained. The composition of these complexes was confirmed by ¹H NMR.     

The influence of compression conditions on the peculiarities of self-propagating exothermal reaction in Al–Ni powder reactive materials

The paper deals with the effect of the compression conditions on the propagation front velocity of exothermal reaction and the specific heat release in Al–Ni powder reactive materials with mean particle sizes of 70–110 nm. It was shown that the velocity increases from 2.7 to 8 cm s^?1 and comes to saturation with the lowering of the porosity (η) from 0.91 to 0.34, while the dependence of the specific heat release has its maximum for η?=?0.5. The results of the X-ray diffraction analysis obtained in situ during the sample heating suggest that the sequence of phase transformations in the system does not depend on the porosity. In all cases, first in the temperature range of ~?500–540 °C the NiAl compound is formed. With the further heating up to ~?640 °C, the Ni₃Al, Ni₂Al₃ and NiAl₃ compounds are additionally formed. The calculation of kinetic parameters was performed using the obtained curves of the differential scanning calorimetry: activation energy, pre-exponential factor and reaction model. The comparison of the calculated results and the scanning electron microscopy data has shown that such behavior of the Al–Ni system with the porosity lowering occurs due to the growth of the transformation degree and is associated with the presence in the final powder mixture of mutually non-contacting Al and Ni agglomerates with the dimensions of over 10 μm.     

PHOTOCHEMISTRY and PHOTOBIOLOGY WITHOUT LIGHT

Abstract— This review covers the literature since 1980 on chemically and enzymatically generated electronically excited species. The emphasis lies on triplet states of carbonyl products that are derived from dioxetanes and dioxetanones as precursors or from suitable enzymatic oxygenations. Singlet oxygen, an important excited state species in biological processes, is not explicitly treated. The utilization of triplet excited carbonyl products to promote photochemical and photobiological transformations by energy transfer are of primordial interest and not the photomechanistic behavior, photophysical properties and inherent photochemical reactions of such excited state species. Thus, the coverage concentrates on photodamage of DNA and RNA, the photochemistry of flavins, vitamin D, tryptophan, arachidonic acid, chlorophyll, lipid peroxidation, urocanase activation, excitation of chlorophlasts, and the aerobic oxidation of Schiff bases derived from amino acids and proteins. The potential perspectives of employing authentic dioxetanes and enzymatically generated dioxetane intermediates as effective photon equivalents in photochemotherapy, phototoxicity, photoaffinity labeling and photogenotoxicity are pointed out, in the hope of stimulating more intensive activity in this emerging and novel bioorganic and photobiological field.     

Relative reactivity of peracids versus dioxiranes (DMDO and TFDO) in the epoxidation of alkenes. A combined experimental and theoretical analysis

Comparative analysis of the calculated gas-phase activation barriers (DeltaE++) for the epoxidation of ethylene with dimethyldioxirane (DMDO) and peroxyformic acid (PFA) [15.2 and 16.4 kcal/mol at QCISD(T)// QCISD/6-31+G(d,p)] and E-2-butene [14.3 and 13.2 kcal/mol at QCISD(T)/6-31G(d)//B3LYP/6-311+G(3df,2p)] suggests similar oxygen atom donor capacities for both oxidants. Competition experiments in CH(2)Cl(2) solvent reveal that DMDO reacts with cyclohexene much faster than peracetic acid/acetic acid under scrupulously dried conditions. The rate of DMDO epoxidation is catalyzed by acetic acid with a reduction in the classical activation barrier of 8 kcal/mol. In many cases, the observed increase in the rate for DMDO epoxidation in solution may be attributed to well-established solvent and hydrogen-bonding effects. This predicted epoxidative reactivity for DMDO is not consistent with what has generally been presumed for a highly strained cyclic peroxide. The strain energy (SE) of DMDO has been reassessed and its moderated value (about 11 kcal/mol) is now more consistent with its inherent gas-phase reactivity toward alkenes in the epoxidation reaction. The unusual thermodynamic stability of DMDO is largely a consequence of the combined geminal dimethyl- and dioxa-substitution effects and unusually strong C-H and C-CH(3) bonds. Methyl(trifluoromethyl)dioxirane (TFDO) exhibits much lower calculated activation barriers than DMDO in the epoxidation reaction (the average DeltaDeltaE++ values are about 7.5 kcal/mol). The rate increase relative to DMDO of approximately 10(5), while consistent with the higher strain energy for TFDO (SE approximately 19 kcal/mol) is attributed largely to the inductive effect of the CF(3) group. We have also examined the effect of alkene strain on the rate of epoxidation with PFA. The epoxidation barriers are only slightly higher for the strained alkenes cyclopropene (DeltaE++ = 14.5 kcal/mol) and cyclobutene (DeltaE++ = 13.7 kcal/mol) than for cyclopentene (DeltaE++ = 12.1 kcal/mol), reflecting the fact there is little relief of strain in the transition state. Alkenes strained by twist or pi-bond torsion do exhibit much lower activation barriers.     

Direct episulfidation of alkenes and allenes with elemental sulfur and thiiranes as sulfur sources,catalyzed by molybdenum oxo complexes

The molybdenum oxo complexes 1a and 1b catalyze efficiently the sulfur transfer to a series of alkenes 4 and allenes 6, for which elemental sulfur, phenylthiirane, or methylthiirane have been employed as sulfur sources to afford the corresponding episulfides 5 and 7. The most effective catalytic episulfidation system to date is the combination of the dithiophosphate-ligated oxo complex 1b and phenylthiirane (Ibeta). This metathesis process is efficient enough to convert usually reluctant alkenes (cyclopentene, cycloheptene, Z-cyclooctene, Z-cyclononene, E-cyclodecene, norbornene, and even bicyclopropylidene) to their episulfides in good yields under mild conditions. The direct catalytic sulfuration of allenes (cyclonona-1,2-diene, cyclonona-1,2,5-triene, cyclodeca-1,2-diene, and 2,4-dimethylpenta-2,3-diene) to their labile methylenethiiranes is unprecedented.     

ASSESSMENT OF GENOTOXICITY AND MUTAGENICITY OF 1,2-DIOXETANES IN HUMAN CELLS USING A PLASMID SHUTTLE VECTOR

Abstract— 1,2-Dioxetanes are efficient sources of triplet excited carbonyl compounds on thermal decomposition. They cause photochemical and photobiological transformations in the dark. In order to study the genotoxicity and mutagenicity of 1,2-dioxetanes, the replicating shuttle vector pZ189 was damaged with 3,3,4-trimethyl-l,2-dioxetane(TrMD) or 3-hydroxymethyl-3,4,4-trimethyl-l,2-dioxetane (HTMD) in vitro and subsequently transfected into normal human lymphoblasts. We found a dose-dependent increase of genotoxicity (decrease of plasmid survival) and increase of mutation frequency with both dioxetanes. However, TrMD was less mutagenic than HTMD at similar genotoxicity. Sequence analysis of the supF gene revealed more point mutations than deletions. Single base substitutions occurred exclusively at G:C sites: 94.6% of point mutations with TrMD and 100% with HTMD were G:C to T:A and G:C to C:G transversions. These are the typical mutations following 7,8-dihydro-8-oxoguanine (8-oxo-G) formation, the main DNA lesion induced by TrMD and HTMD. Only with TrMD we found 5.4% G:C to A:T transitions, probably reflecting the more pronounced ability of TrMD to form some pyrimidine dimers. Our results indicate that 8-oxo-G is also the most relevant modification in in vivo mutagenesis.     

On the electronic character of localized singlet 2,2-dimethoxycyclopentane-1,3-diyl diradicals: substituent effects on the lifetime

Photodenitrogenation of the diazenes 4 affords exclusively the housanes 5 through intramolecular cyclization of the spectrally detected and characterized singlet diradicals 3. The lifetime of singlet diradical 3, determined by transient absorption measurements, depends on the Y and Z substituents at the para position of the phenyl ring and has the following order: Y, Z = OMe, OMe > OMe, CN > CN, CN > OMe, H > Cl, Cl approximately CN, H approximately Me, Me > H, H. This unprecedented substituent effect reveals stabilization of the singlet 2,2-dimethoxycyclopentane-1,3-diyl diradicals 3 through radical, zwitterionic, pi-bonding, and hyperconjugative structures.     

Redox-iodometry: a new potentiometric method

A new iodometric method for quantifying aqueous solutions of iodide-oxidizing and iodine-reducing substances, as well as plain iodine/iodide solutions, is presented. It is based on the redox potential of said solutions after reaction with iodide (or iodine) of known initial concentration. Calibration of the system and calculations of unknown concentrations was performed on the basis of developed algorithms and simple GWBASIC-programs. The method is distinguished by a short analysis time (2–3 min) and a simple instrumentation consisting of pH/mV meter, platinum and reference electrodes. In general the feasible concentration range encompasses 0.1 to 10^–6 mol/L, although it goes down to 10^–8 mol/L (0.001 mg Cl₂/L) for oxidants like active chlorine compounds. The calculated imprecision and inaccuracy of the method were found to be 0.4–0.9% and 0.3–0.8%, respectively, resulting in a total error of 0.5–1.2%. Based on the experiments, average imprecisions of 1.0–1.5% at c(Ox)>10^–5 M, 1.5–3% at 10^–5 to 10^–7 M, and 4–7% at <10^–7 M were found. Redox-iodometry is a simple, precise, and time-saving substitute for the more laborious and expensive iodometric titration method, which, like other well-established colorimetric procedures, is clearly outbalanced at low concentrations; this underlines the practical importance of redox-iodometry.

---

An erratum to this article is available at .