Radical-scavenging activity of the reaction products of isoeugenol with thiol, thiophenol, mercaptothiazoline or mercaptomethylimidazole using the induction period method

The reaction products in the presence of Lewis acid of isoeugenol (1) with ethanethiol, thiophenol, 2-mercaptothiazoline or 2-mercapto-1-methylimidazole (ISO-S1-ISO-S-4) were obtained. The radical-scavenging activity of these compounds was investigated using the induction period method for polymerization of methyl methacrylate (MMA) initiated by thermal decomposition of 2,2'-azobisisobutyronitrile (AIBN) and benzoyl peroxide (BPO) and monitored by differential scanning calorimetry (DSC). For BPO, the stoichiometric factor (number of free radicals trapped by one mole of antioxidant moiety, n) declined in the order isoeugenol (1.8) > ISO-S-1 (1.6) > ISO-S-2 (1.2) > ISOS- 3 (0.9) > ISO-S-4 (0.3), whereas for AIBN, their n values were about 1, except for ISOS- 3 (0.6). The ratio of the rate constant of inhibition to that of propagation (k(inh)/k(p)) for BPO declined in the order ISO-S-4 (56) > ISO-S-3 (15) > ISO-S-2 (11) >ISO-S-1 (9) > isoeugenol (8). Similarly, for AIBN the k(inh)/k(p) of the reaction products (33-57) was greater than that of isoeugenol (31). The reaction products of isoeugenol with a SH group showed greater inhibition rate constants (kinh) than the parent compound isoeugenol.     

Spontaneous vesicle formation of single chain and double chain cationic surfactant mixtures

The concentration vs composition diagram of aggregate formation of the dodecyltrimethylammonium bromide (DTAB) and didodecyldimethylammonium bromide (DDAB) mixture in aqueous solution at rather dilute region was constructed by analyzing the surface tension, turbidity, and electrical conductivity data and inspected by cryo-TEM images and dynamic light scattering data. Although the aqueous solution of DTAB forms only micelles, the transition from monomer to small aggregates and then to vesicle was found at 0.1 < X2 相似文献   

A flexible coordination polymer crystal providing reversible structural and magnetic conversions

Structural flexibility is a remarkable characteristic of coordination polymers and significant for the attainment of environmental responsivity. We have prepared a 2D cyanide-bridged MnIICrIII coordination polymer, [Mn(NNdmenH)(H2O)][Cr(CN)6].H2O (1; NNdmen = N,N-dimethylethylenediamine), with sophisticatedly arranged removable water coligands. The compound clearly showed a reversible single-crystal-to-single-crystal transformation between the 2D sheet and a 3D pillared-sheet framework of dehydrated [Mn(NNdmenH)][Cr(CN)6] (1a). The structural change was reversible and accompanied with generation/cleavage of CN-Mn bonds between 2D sheets by dehydration/hydration. Compounds 1 and 1a also exhibited a ferrimagnetic ordering at 35.2 and 60.4 K, respectively, and the magnetic characteristics were reversibly converted by guest adsorption/desorption. In addition, the dehydrated 1a demonstrated a size-selective solvent adsorption linking chemi- and physisorption processes and shrinkage/expansion of its framework. The flexible magnetic framework incorporating removable coligands delivered multifunctions with chemical response.     

Growth Curve Model with Hierarchical Within-Individuals Design Matrices

This paper deals with some inferential problems under an extended growth curve model with several hierarchical within-individuals design matrices. The model includes the one whose mean structure consists of polynomial growth curves with different degrees. First we consider the case when the covariance matrix is unknown positive definite. We derive a LR test for examining the hierarchical structure for within individuals design matrices and a model selection criterion. Next we consider the case when a random coefficients covariance structure is assumed, under certain assumption of between-individual design matrices. Similar inferential problems are also considered. The dental measurement data (see, e.g., Potthoff and Roy (1964, Biometrika, 51, 313-326)) is reexamined, based on extended growth curve models.     

Phase separation of gas–liquid and liquid–liquid microflows in microchips

Phase separation of gas–liquid and liquid–liquid microflows in microchannels were examined and characterized by interfacial pressure balance. We considered the conditions of the phase separation, where the phase separation requires a single phase flow in each output of the microchannel. As the interfacial pressure, we considered the pressure difference between the two phases due to pressure loss in each phase and the Laplace pressure generated by the interfacial tension at the interface between the separated phases. When the pressure difference between the two phases is balanced by the Laplace pressure, the contact line between the two phases is static. Since the contact angle characterizing the Laplace pressure is restricted to values between the advancing and receding contact angles, the Laplace pressure has a limit. When the pressure difference between the two phases exceeds the limiting Laplace pressure, one of the phases leaks into the output channel of the other phase, and the phase separation fails. In order to experimentally verify this physical picture, microchips were used having a width of 215 μm and a depth of 34 μm for the liquid–liquid microflows, a width of 100 μm and a depth of 45 μm for the gas–liquid microflows. The experimental results of the liquid–liquid microflows agreed well with the model whilst that of the gas–liquid microflows did not agree with the model because of the compressive properties of the gas phase and evaporation of the liquid phase. The model is useful for general liquid–liquid microflows in continuous flow chemical processing.     

Tuning of Electronic Properties of Single‐Walled Carbon Nanotubes under Homogenous Conditions

Reversible and non‐bonding interaction between SWNTs and ODCB is observed from the analyses of visible near‐infrared absorption data and Raman spectroscopies (see spectra). The solvent effect on SWNTs effectively controls the electronic structure of SWNTs under homogeneous conditions.

     

Reduction of 1,4-dien-3-one steroids with LiAl2H4 or NaB2H4: stereospecific deuterium-labeling at the c-1alpha position of a 4-en-3-one steroid

Reduction of a double bond at C-1 of 1,4-dien-3-one steroids 7 and 8 with LiAl2H4 in THF or NaB2H4 in MeOH and H2O gave stereospecifically [1alpha-2H]-labeled 4-en-3-one steroids 9 and 10, respectively. When the deuterated solvents, MeO2H and 2H2O, were used for the reaction of steroid 8 with NaB2H4, [1alpha,2xi-2H2]-labeled compound 10 was produced. This indicates that the reaction proceeds through the initial hydride attack at the C-1alpha position, followed by ketonization of the 2-en-3-ol intermediate.     

Fast screening of pesticide multiresidues in aqueous samples by dual stir bar sorptive extraction-thermal desorption-low thermal mass gas chromatography-mass spectrometry

A method for fast screening of pesticide multiresidues in aqueous samples using dual stir bar sorptive extraction-thermal desorption-low thermal mass gas chromatography-mass spectrometry (dual SBSE-TD-LTM-GC-MS) has been developed. Recovery of 82 pesticides - organochlorine, carbamate, organophosphorous, pyrethroid and others - for the SBSE was evaluated as a function of octanol-water distribution coefficients (logK(o/w): 1.7-8.35), sample volume (2-20mL), salt addition (0-30% NaCl), and methanol addition (0-20%). The optimized method consists of a dual SBSE performed simultaneously on respectively a 20-mL sample containing 30% NaCl and a 20-mL sample without modifier (100% sample solution). One extraction with 30% NaCl is mainly targeting solutes with low K(o/w) (logK(o/w)<3.5) and another extraction with unmodified sample solution is targeting solutes with medium and high K(o/w) (logK(o/w)>3.5). After extraction, the two stir bars are placed in a single glass desorption liner and are simultaneously desorbed. The desorbed compounds are analyzed by use of LTM-GC-MS with fast temperature programming (75 degrees Cmin(-1)) using a 0.18mm i.d. narrow-bore capillary column and fast scanning (10.83 scan s(-1)) using quadrupole MS. The method showed good linearity (r(2)>0.9900) and high sensitivity (limit of detection: <10ngL(-1)) for most of the target pesticides. The method was applied to the determination of pesticides at nanograms per liter levels in river water and brewed green tea.     

Imaging of a soft, weakly adsorbing, living cell with a colloid probe tapping atomic force microscope technique

Here, we propose a new method to improve the atomic force microscopy (AFM) image resolution of soft samples, such as cells, in liquid. Attaching a colloid probe to a cantilever was seen improve the image resolution of a living cell in a physiological buffer solution, obtained by the normal tapping mode, when compared to an image obtained using a regular cantilever tip. This may be due to the averaging out of the cantilever tip swinging caused by the visco-elasticity of the cell. The resolution was best, when silica spheres with a 3.3 microm diameter were attached. Although larger spheres gave a resolution better than a bare cantilever tip, their resolution was less than that obtained for the 3.3 microm diameter silica colloid. This dependency of the image resolution on the colloid probe size may be a result of the increased macroscopic van der Waals attraction between the cell and probe, the decreased repulsive force dependence on the cantilever probe radius, and the decrease in resolution due to the increased probe size. The size of the colloid probe, which should be attached to the cantilever to give the best image resolution, would be the one that optimises the combined result of these facts.