Electron paramagnetic resonance, optical absorption and IR spectroscopic studies of the sulphate mineral apjohnite

Apjohnite, a naturally occurring Mn-bearing pseudo-alum from Terlano, Bolzano, Italy, has been characterized by EPR, optical, IR and Raman spectroscopy. The optical spectrum exhibits a number of electronic bands around 400 nm due to Mn(II) ion in apjohnite. From EPR studies, the parameters derived, g=2.0 and A=8.82 mT, confirm MnO(H(2)O)(5) distorted octahedra. The presence of iron impurity in the mineral is reflected by a broad band centered around 8400 cm(-1) in the NIR spectrum. A complex band profile appears strongly both in IR and Raman spectra with four component bands around 1100 cm(-1) due to the reduction of symmetry for sulphate ion in the mineral. A strong pair of IR bands at 1681 and 1619 cm(-1) with variable intensity is a proof for the presence of water in two states in the structure of apjohnite.     

A microfluidic channel flow cell for electrochemical ESR

The design, fabrication, and characterization of microfluidic channel flow devices for in situ simultaneous hydrodynamic electrochemical ESR is reported. The microelectrochemical reactors consist of gold film electrodes situated within rectangular ducts of height 350 microm and widths in the range 500-2000 microm. The small dimensions of the channels result in minimal dielectric loss when centralized within a cylindrical TE011 resonant cavity, leading to a high level of sensitivity. This is demonstrated by using the one-electron oxidation of N,N,N',N'-tetramethyl-p-phenylenediamine (TMPD) in acetonitrile as a model system, wherein the ESR spectra obtained for the corresponding stable radical cation are of a high signal-to-noise ratio. Signal intensity is measured as a function of flow rate for this system, and the behavior is validated by means of 3-dimensional numerical modeling of the hydrodynamic flow profile.     

Voltammetric and electrochemical ESR studies of oxidation reactions mediated by tris(4-bromophenyl)amine in acetonitrile

The electrochemical oxidation of tris(4-bromophenyl)amine in the presence of 2,6-lutidine is examined in acetonitrile. Voltammetric and spectroscopic investigations suggest that the electrogenerated triaryl aminium radical cation oxidizes 2,6-lutidine in an EC' mechanism, and an equilibrium constant for this homogeneous electron transfer is estimated. The mediated oxidation of a protected phenyl selenoglycoside by this reaction mixture is studied by the use of electrochemical ESR, employing a tubular flow cell, and signal intensity data is found to be consistent with the proposed mechanism, allowing the determination of kinetic parameters by computational simulation. Products of the mediated glycoside oxidation are determined by proton NMR and mass spectrometry.     

Influence of ultrathin poly-(3,4-ethylenedioxythiophene) (PEDOT) film supports on the electrodeposition and electrocatalytic activity of discrete platinum nanoparticles

Coating a carbon electrode surface, specifically highly oriented pyrolytic graphite (HOPG) with an ultrathin film of poly-(3,4-ethylenedioxythiophene), PEDOT, provides a support on which a high density of uniformly dispersed Pt nanoparticles (NPs) can readily be formed by electrodeposition. The NPs tend to be much smaller, have a higher surface coverage, better dispersion and show a much lower tendency to aggregate, than Pt NPs produced under identical electrochemical conditions on HOPG alone. The electrocatalytic activity of the NPs was investigated for methanol (MeOH) and formic acid (HCOOH) oxidation. Significantly, for similarly prepared particles, Pt NP-PEDOT arrays exhibited higher catalytic activity (in terms of current density, based on the Pt area), towards MeOH oxidation, by an order of magnitude, and towards HCOOH oxidation at high potentials, than Pt NPs supported on native HOPG. These findings can be rationalised in terms of the enhanced oxidation of adsorbed CO, a key reaction intermediate and a catalyst poison. This research provides strong evidence that employing conducting polymers, such as PEDOT, as a support substrate, can greatly improve particular catalytic reactions, allowing for better catalyst utilisation in fuel cell technology.     

Ultrasonic extraction of iron from non-aqueous liquids

A novel procedure for the extraction of iron from predominately organic solvents has been described. An ultrasonic probe was used to create a microemulsion with a small quantity of nitric acid such that labile iron could be released into the aqueous vesicles and subsequently quantified after phase separation. The analytical and operational viability of using a simple colorimetric assay based on the coordination of aminothiol ligands (principally homocysteine) was evaluated in terms of signal sensitivity, selectivity and stability. The use of homocysteine provided a linear range for iron(III) from 9 microM to 50 microM with a corresponding limit of detection of 2 microM (based on 3s(b)). The effectiveness of the approach was assessed through the recovery of 0.3 ppm iron from a sample of commercial kerosene and the results compared with those obtained through attempting to quantify the iron under passive (ultrasonically silent) conditions.     

Vibrational spectroscopy of selected minerals of the rosasite group

Minerals in the rosasite group namely rosasite, glaucosphaerite, kolwezite, mcguinnessite have been studied by a combination of infrared and Raman spectroscopy. The spectral patterns for the minerals rosasite, glaucosphaerite, kolwezite and mcguinnessite are similar to that of malachite implying the molecular structure is similar to malachite. A comparison is made with the spectrum of malachite. The rosasite mineral group is characterised by two OH stretching vibrations at approximately 3401 and 3311 cm-1. Two intense bands observed at approximately 1096 and 1046 cm-1 are assigned to nu1(CO3)2- symmetric stretching vibration and the delta OH deformation mode. Multiple bands are found in the 800-900 and 650-750 cm-1 regions attributed to the nu2 and nu4 bending modes confirming the symmetry reduction of the carbonate anion in the rosasite mineral group as C2v or Cs. A band at approximately 560 cm-1 is assigned to a CuO stretching mode.     

Numerical continuation of degenerate homoclinic orbits in planar systems

In this paper we develop numerical algorithms for the continuationof degenerate homoclinic connections in planar systems. We considerthe case where the equilibrium point has zero trace and twocases of higher-order degeneracies. The method we propose isable to continue homoclinic connections of order up to codimension-four.Application of the algorithm to four examples supports its validityand demonstrates its usefulness.     

Gas-phase deprotonation of arylalkylamines. A collision-induced dissociation study

The collision-induced dissociation (CID) of deprotonated arylalkylamines of general formula R(1)C(6)H(4)CHR(2)CH(2)NR(3)(2) (where R(1) = H, OH, F or NO(2); R(2) = H or OH; R(3) = H or CH(3)) generated by negative chemical ionization with H(2)O and D(2)O as ionizing reagents, is discussed. The negative chemical ionization mass spectra show that, in the absence of a hydroxy group in the aromatic ring, deprotonation takes place at the benzylic position whereas the proton is lost from the OH group when present. The nitro compound forms only M(-.) ions. The CID spectra of the deprotonated molecules show that fragmentations are strongly dependent on the structural features of the molecules, namely the presence or absence of substituents in the aromatic ring or aliphatic chain. Copyright 1999 John Wiley & Sons, Ltd.     

The onset of coulomb explosions in polyatomic molecules

With the development of high intensity femtosecond lasers, the ionisation and dissociation dynamics of molecules has become an area of considerable interest. Using the technique of femtosecond laser mass spectrometry (FLMS), the molecules carbon disulphide, pyrimidine, toluene, cyclohexanone and benzaldehyde are studied with pulse widths of 50 fs in the near infrared (IR) wavelength region (790 nm). Results are presented and contrasted for laser beam intensities around 10(15) and 10(16) W cm(-2). For the lower intensities, the mass spectra yield dominant singly charged parent ions. Additionally, the appearance of doubly charged parent ions is evident for carbon disulphide, toluene and benzaldehyde with envelopes of doubly charged satellite species existing in these local regions. Carbon disulphide also reveals a small triply charged component. Such atomic-like features are thought to be a strong fingerprint of FLMS at these intensities. However, upon increasing the laser intensity to approximately 10(16) W cm(-2), parent ion dominance decreases and the appearance of multiply charged atomic species occurs, particularly carbon. This phenomenon has been attributed to Coulomb explosions in which the fast absorption of many photons may produce transient highly ionised parent species which can subsequently blow apart. Copyright 1999 John Wiley & Sons, Ltd.