Development of a quantitative FI-MS technique for the characterization of high- and nonboiling saturated hydrocarbon mixtures

Summary Using a saturated non-boiling hydrocarbon mixture, the influence of two parameters on the results of field ionization mass spectrometry (FI-MS) measurements was studied: (a) the potential difference between the FI emitter and the counterelectrode; (b) the emitter temperature.Variation of the potential difference had only a minor effect on the average molecular mass measured and had no evident effect on the relative ring number distribution in the sample. In contrast, when the emitter temperature was increased, higher average molecular masses were recorded. Moreover, the average molecular masses shifted to higher ring numbers. In order to control the relationship between the described influences during mixture analysis, measuring instructions have been developed that enable the quantitative analysis of unknown saturated samples. However, average molecular mass of the mixture must be known.

---

Entwicklung einer quantitativen FI-MS-Methode zur Charakterisierung von gesättigten hoch- und nichtsiedenden Kohlenwasserstoffgemischen

     

Surface-field induced interband tunneling in InAs

Metal/insulator/semiconductor junctions are prepared on degeneratep-type InAs substrates with hole concentrations ranging from 2.3×10¹⁷ cm^–3 to 2.7×10¹⁸ cm^–3. The low work function of the top metal Yb, Al, or Au and charged interface states influence a two-dimensional (2D) electron inversion layer at the InAs surface. The insulator barrier that is formed by thermal oxidation is designed sufficiently thin, so that the bias voltage applied at the metal electrode mainly drops across the depletion layer separating the electron channel from the bulk. The current-voltage (I–V) characteristics exhibit strong negative differential conductance due to interband, tunneling from the 2D subband into the 3D valence band with peak-to-valley current ratios up to 3.1, 18, and 32 at 300 K, 77 K, and 4.2 K, respectively. In agreement with a theoretical model based on coherentelastic tunneling, the form of the I–V curves resembles those of double-barrier resonant tunnel devices rather than those of 3D Esaki diodes. The series resistance is obtained from the saturation of the differential conductance dI/dV at high forward bias and from the shift of structures in d² I/dV ² arising from phonon assisted tunneling.Dedicated to G. Lautz on the occasion of his 65th birthday     

Amplifiers and Lasers in PCF Configurations

In this paper we will present an overview of the use of photonic crystal fibers as fiber amplifiers. We will describe the basic concepts of optical amplification, and how to do numerical modelling of such components. We will then identify advantages and disadvantages of amplifiers based on PCF technology compared to conventional fibers, and then go into greater detail on some of these specific applications, such as low pump power amplifiers, and high-power double-clad amplifiers and lasers.     

An Efficient Numerical Model for Planar Spiral Inductor On-Chip

In this paper, a very useful numerical technique has been developed for analyzing the transient characteristics of a planar-spiral inductor on-chip. A locally conformal technique and an alternating-direction implicit scheme are applied to the finite-difference time-domain method. A formulation for solving three dimensional Maxwell’s equations is proposed. Using the proposed method, various parameters of the planar-spiral inductors have been analyzed and an equivalent circuit, which includes frequency-independent circuit elements, has been introduced. Highly computational efficiency is implemented. Numerical results show excellent agreement with the measured data over a wide frequency range.     

Rain Attenuation at 103 GHz in Millimeter Wave Ranges

We have conducted a millimeter wave propagation experiment at 103 GHz (2.9 mm) on a propagation path of 390 m. The results were compared with the rain attenuation calculations from the Marshall-Palmer, Best, Joss-Thomas-Waldvogel and Weibull distributions for raindrop-size. It has been shown that the Weibull distribution has a good agreement with the experiments.     

Structure of solid monolayers and multilayers of n -hexane on graphite

We present all-atom molecular dynamics simulations ofn-hexane on the basal plane of graphite at monolayer and multilayer coverages. In keeping with experimental data, we find the presence of ordered adsorbed layers both at single monolayer coverage and when the adsorbed layer coexists with excess liquid adsorbate. Using a simulation method that does not impose any particular periodicity on the adsorbed layer, we quantitatively compare our results to the results of neutron diffraction experiments and find a structural transition from a uniaxially incommensurate lattice to a fully commensurate structure on increasing the coverage from a monolayer to a multilayer. The zig-zag backbone planes of all the alkane molecules lie parallel to the graphite surface at the multilayer coverage, while a few molecules are observed to attain the perpendicular orientation at monolayer coverage. Dedicated to Professor C N R Rao on his 70th birthday     

The “corset effect” of spin-lattice relaxation in polymer melts confined in nanoporous media

Linear polyethylene oxides with molecular weightsM _w of 1665 and 10170 confined in pores with variable diameters in a solid methacrylate matrix were studied by proton field-cycling nuclear magnetic resonance relaxometry. The pore diameter was varied in the range of 9–57 nm. In all cases, the spin-lattice relaxation time shows a frequency dependence close toT ₁∞ v^3/4 in the range ofv=3·10^?1-2·10¹ MHz as predicted by the tube-reptation model. This protonT ₁ dispersion essentially reproduces that found in a previous deuteron study (R. Kimmich, R.-O. Seitter, U. Beginn, M. Möller, N. Fatkullin: Chem. Phys. Lett. 307, 147, 1999). As a feature particularly characteristic for reptation, this finding suggests that reptation is the dominating chain dynamics mechanism under pore confinement in the corresponding time range. The absolute values of the spin-lattice relaxation times indicate that the diameter of the effective tubes in which reptation occurs is much smaller than the pore diameters on the time scale of spin-lattice relaxation experimens. An estimation leads to a valued ^*～0.5 nm. The impenetrability of the solid pore walls, the uncrossability of polymer chains (“excluded volume”) and the low value of the compressibility in polymer melts create the “corset effect” which reduces the lateral motions of polymer chains to a microscopic scale of only a few tenths of a nanometer.     

From a Nonlinear, Nonconvex Variational Problem to a Linear, Convex Formulation

   Abstract. We propose a general approach to deal with nonlinear, nonconvex variational problems based on a reformulation of the problem resulting in an optimization problem with linear cost functional and convex constraints. As a first step we explicitly explore these ideas to some one-dimensional variational problems and obtain specific conclusions of an analytical and numerical nature.     

A Dominated Theorem on 5L(2, R) and Its Application

In this paper, we give the following dominated theorem: Let φ(g) ∈ L1(G//K),φε(t)=ε> 0, and the least radical decreasing dominatedfunction φ(t) = sup |φ(y)| ∈L1(G//K). If shtφ(t) is monotonically decreasingon (0, ∞), then for any f∈L1loc(G//K) , the following inequality holds:sup |φε * f(x)| ≤ Cmf(x),where mf(x) is the Hardy-Littlewood maximal function of f, and C = ||φ||1.An application of this dominated theorem is also given.