Photopyroelectric spectroscopy (P2ES) of electronic defect centers in crystalline n-CdS

The electrical and dielectric properties of mercuric iodide were studied at room temperature under various intensities and colours of light in the frequency range 1 Hz–10 kHz. In the high-frequency region (>40 Hz), the real part of the dielectric constant () is almost constant with frequency (f), colour and intensity of light. At lower frequencies, varies nearly as 1/f and monotonically increases with intensity (I) of the yellow (or green) light, whereas it is almost constant with red light intensity. This behaviour is discussed in the view of the different polarization contributions. The imaginary part of the dielectric constant () was found to vary as 1/f over the frequency range studied. This behaviour was observed whether the crystal was in dark or illuminated implying that the roomtemperature ac dark- or photo-conductivity () is independent of frequency. The observed variation of with intensity of yellow (or green) light was found to follow anI ^1/2 dependence and a weaker dependence for the red light. the red light. The conductivity behaviour is discussed in the view of the current theories.     

Substituierte 2-(Thiazol-4-yl)-phenole als Liganden und potentielle Extraktionsmittel für Kupfer(II)

Substituted 2-(Thiazol-4-yl)-phenols as Ligands and Potential Extractants for Copper (II) Substituted 2-(thiazol-4-yl)-phenols are obtained by the HANTZSCH synthesis. Their solubility in toluene is higher than in n-octane depending on the position, the chain length, and the polarity of the substituents. From alcoholic solutions complexes of the type CuL₂ⁿ are precipitated. According to the substituents their structure is distorted octahedral (CuL₂², CuL₂³) or distorted tetrahedral (CuL₂⁸, CuL₂⁹). The new complexes are nearly insoluble in toluene and aliphatic hydrocarbons, but CuL₂⁸ and CuL₂⁹ are soluble in chloroform. Therefore copper(II) may be extracted by HL⁸ and HL⁹ using chloroform as a diluent.     

Synthese und Molekülstrukturen von N‐substituierten Diethylgallium‐2‐pyridylmethylamiden

Synthesis and Molekular Structures of N‐substituted Diethylgallium‐2‐pyridylmethylamides (2‐Pyridylmethyl)(tert‐butyldimethylsilyl)amine ( 1a ) and (2‐pyridylmethyl)‐di(tert‐butyl)silylamine ( 1b ) form with triethylgallane the corresponding red adducts 2a and 2b via an additional nitrogen‐gallium bond. These oily compounds decompose during distillation. Heating under reflux in toluene leads to the elimination of ethane and the formation of the red oils of [(2‐pyridylmethyl)(tert‐butyldimethylsilyl)amido]diethylgallane ( 3a ) and [(2‐pyridylmethyl)‐di(tert‐butyl)silylamido]diethylgallane ( 3b ). In order to investigate the thermal stability solvent‐free 3a is heated up to 400 °C. The elimination of ethane is observed again and the C‐C coupling product N, N′‐Bis(diethylgallyl)‐1, 2‐dipyridyl‐1, 2‐bis(tert‐butyldimethylsilyl)amido]ethan ( 4 ) is found in the residue. Substitution of the silyl substituents by another 2‐pyridylmethyl group and the reaction of this bis(2‐pyridylmethyl)amine with GaEt₃ yield triethylgallane‐diethylgallium‐bis(2‐pyridylmethyl)amide ( 5 ). The metalation product adds immediately another equivalent of triethylgallane regardless of the stoichiometry. The reaction of GaEt₃ with 2‐pyridylmethanol gives quantitatively colorless 2‐pyridylmethanolato diethylgallane ( 6 ).     

A Novel Environmentally Benign Method for the Selective Oxidation of Alcohols to Aldehydes and Ketones

In the presence of [Ru(terpyridine)(2,6‐pyridinedicarboxylate)], aliphatic and benzylic alcohols are oxidized to the corresponding aldehydes or ketones with high selectivity by using hydrogen peroxide as the oxidant. There is no need for the addition of co‐catalysts or organic solvents. By applying an optimized reaction protocol, high catalyst productivity (turnover number>10 000) and activity (turnover frequency up to 14 800 h^?1) has been achieved.     

Sampling and sample preparation

Summary Problems, techniques and means of water sampling are reviewed. Applicability and performance are discussed with regard to individual and composite samples, and also to automatic sampling. Storage and preservation of samples are dealt with.

---

Probenahme und Behandlung von ProbenWasser

Zusammenfassung Probleme, Verfahren und Hilfsmittel bei der Probenahme von Wasser werden behandelt. Ausführung und Anwendbarkeit von Einzel und Mischproben sowie der automatischen Probenahme werden diskutiert, ebenso die Aufbewahrung und Konservierung von Proben.

Start of discussion held at the 6th Annual Symposium on Recent Advances in the Analytical Chemistry of Pollutants, April 21–23, 1976; Vienna, Austria.     

The surface and materials science of tin oxide

The study of tin oxide is motivated by its applications as a solid state gas sensor material, oxidation catalyst, and transparent conductor. This review describes the physical and chemical properties that make tin oxide a suitable material for these purposes. The emphasis is on surface science studies of single crystal surfaces, but selected studies on powder and polycrystalline films are also incorporated in order to provide connecting points between surface science studies with the broader field of materials science of tin oxide. The key for understanding many aspects of SnO₂ surface properties is the dual valency of Sn. The dual valency facilitates a reversible transformation of the surface composition from stoichiometric surfaces with Sn⁴⁺ surface cations into a reduced surface with Sn²⁺ surface cations depending on the oxygen chemical potential of the system. Reduction of the surface modifies the surface electronic structure by formation of Sn 5s derived surface states that lie deep within the band gap and also cause a lowering of the work function. The gas sensing mechanism appears, however, only to be indirectly influenced by the surface composition of SnO₂. Critical for triggering a gas response are not the lattice oxygen concentration but chemisorbed (or ionosorbed) oxygen and other molecules with a net electric charge. Band bending induced by charged molecules cause the increase or decrease in surface conductivity responsible for the gas response signal. In most applications tin oxide is modified by additives to either increase the charge carrier concentration by donor atoms, or to increase the gas sensitivity or the catalytic activity by metal additives. Some of the basic concepts by which additives modify the gas sensing and catalytic properties of SnO₂ are discussed and the few surface science studies of doped SnO₂ are reviewed. Epitaxial SnO₂ films may facilitate the surface science studies of doped films in the future. To this end film growth on titania, alumina, and Pt(1 1 1) is reviewed. Thin films on alumina also make promising test systems for probing gas sensing behavior. Molecular adsorption and reaction studies on SnO₂ surfaces have been hampered by the challenges of preparing well-characterized surfaces. Nevertheless some experimental and theoretical studies have been performed and are reviewed. Of particular interest in these studies was the influence of the surface composition on its chemical properties. Finally, the variety of recently synthesized tin oxide nanoscopic materials is summarized.     

Vibrational spectra of Hg3TeO6 and Hg2TeO5

The infrared and Raman spectra of the crystalline hexaoxotellurates Hg3TeO6 and Hg2TeO5 were recorded and discussed on the basis of a site symmetry analysis derived from known structural data. Approximate values for the Te-O bond force constants are reported and some comparisons with related species are made.     

Investigation of homo- and heterodimer alkali metal cation complexes of resorc[4]arenes by electrospray ionization mass spectrometry

Resorc[4]arenes are compounds with interesting properties, mainly because of their ability to form host-guest complexes with the guest located inside the cavity. The size of the guest limits the complexation, as shown by a competition experiment with tetraalkylammonium ions of different size. By electroscopy ionization tandem mass spectrometric experiments on resorc[4]arene heterodimers bearing an alkali metal ion as guest, it was found that there must be two different binding mechanisms for alkali metal ions with high surface charge density (Li(+) and Na(+)) on the one hand compared with those with a lower surface charge density on the other hand (K(+), Rb(+), Cs(+)).