Development of hydrophilic fluorogenic derivatization reagents for thiols: 4-(N-acetylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole and 4-(N-trichloroacetylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole

Sensitive, reactive, and hydrophilic fluorogenic reagents for thiols with the benzofurazan skeleton, 4-(N-acetylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole (AcABD-F) and 4-(N-trichloroacetylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole (TCAcABD-F) have been developed. These reagents reacted with thiols within 10 min at 60 degrees C. AcABD-F and TCAcABD-F themselves do not fluoresce but are strongly fluorescent after the reaction with thiol compounds. The generated derivatives were highly water-soluble, since they dissociated a proton and ionized in the neutral pH region. The derivatives with four biologically important thiol compounds were separated on a reversed-phase HPLC column and detected fluorometrically at 504 nm with excitation at 388 nm. The detection limit attained for homocysteine with AcABD-F was 25 fmol on column (11 nM) (signal-to-noise ratio = 3), and that for glutathione with TCAcABD-F was 45 fmol on column (20 nM).     

A new strategy in enantioselective intramolecular hetero Diels-Alder reaction: catalytic double asymmetric induction during the tandem transetherification-intramolecular hetero Diels-Alder reaction of methyl (E)-4-methoxy-2-oxo-3-butenoate with rac-6-methyl-5-hepten-2-ol

An efficient catalytic double asymmetric induction during the tandem transetherification-intramolecular hetero Diels-Alder reaction has been developed. The enantioselective tandem reaction of methyl (E)-4-methoxy-2-oxo-3-butenoate with rac-6-methyl-5-hepten-2-ol has been achieved to provide methyl (2R,4aS,8aR)-3,4,4a,8a-tetrahydro-2,5,5-trimethyl-2H,5H-pyrano[4,3-b]-pyran-7-carboxylate in good yield with effective kinetic resolution (up to 95% selectivity), high diastereoselectivity (up to 92% de), and high enantioselectivity (up to 97% ee) in the presence of (S,S)-tert-Bu-bis(oxazoline)-Cu(SbF₆)₂ and 5 Å molecular sieves.     

Charge separation in a nonfluorescent donor-acceptor dyad derived from boron dipyrromethene dye, leading to photocurrent generation

Boron dipyrromethene (BODIPY), which is commonly used as an energy absorbing and transferring antenna molecule, has been modified to contain an electron donor moiety, 8-(2,4,5-trimethoxyphenyl)-4,4-difluoro-1,3,5,7-tetramethyl-4-bora-3a,4a-diaza-s-indacene (MEOPHBDP). The photoinduced electron transfer from a 2,4,5-trimethoxyphenyl moiety to a BODIPY moiety of MEOPHBDP in acetonitrile was observed by femtosecond laser flash photolysis measurements. The lifetime of the charge-separated state of MEOPHBDP was 59 ps at 298 K. The dye-sensitized solar cells (DSSC) were prepared using MEOPHBDP with carboxylic acid (MEOPHBDP-COOH) and a reference BODIPY dye having no electron donor moiety. The photovoltaic measurements were performed using a standard two-electrode system consisting of a working electrode and a Pt sputtered electrode in methoxyacetonitrile containing 0.5 M iodide and 0.05 M I(2). The photoelectrochemical properties of DSSC with MEOPHBDP are compared with those with a reference BODIPY dye.     

Analysis of dynamic behavior of human middle ear using a finite-element method.

Applying the general-purpose finite-element package program (ISAP), a three-dimensional finite-element method (FEM) model of a human right middle ear, which included ossicles, was made and the mechanical properties and boundary conditions of the middle ear were determined by a comparison between the numerical results obtained from the FEM analysis and the measurement results of the fresh cadavers, normal subjects and patients, which were obtained by our developed sweep frequency middle ear analyzer (MEA). The "Elastic" boundary condition consisting of linear and torsional springs at the eardrum attachments to the annular ligament was more appropriate for the actual condition than "fully clamped" one. Rotational axis of the ossicular chain was assumed to be a fixed straight line from the anterior process of the malleus to the short process of the incus, and a load of the ossicular chain and cochlea was simplified to be expressed by the stiffness of the cochlea. Vibration patterns of the eardrum and ossicles at the first resonance frequency, obtained under these assumptions, were in agreement with the experimental results obtained by means of time-averaged holography and by using a video measuring system, except for the relatively large displacements at the tympanic ring.     

Practical synthesis of a neuropeptide Y antagonist via stereoselective addition to a ketene

[Reaction: see text]. The synthesis of neuropeptide Y antagonist 1, currently under clinical investigation for the treatment of obesity, is described. The convergent synthesis from trans-spirolactone carboxylic acid intermediate 2a and aminopyrazole 3 is predicated on a stereoselective route to the former. The coupling reaction of ethyl 4-oxocyclohexanecarboxylate (10a) with lithiated isonicotinamide 11 was investigated in detail, but even optimized conditions only provided a 45:55 ratio of trans:cis isomers (12a:12b). While selective crystallization schemes were developed to isolate the thermodynamically less stable trans isomer 2a, improved stereocontrol was subsequentially achieved by the application of ketene chemistry. The ketene formation and quench was investigated under a variety of conditions aimed at maximizing the trans:cis ratio. Reacting a mixture of carboxylic acids 2a and 2b with POCl3 in THF, followed by concomitant addition of tert-butyl alcohol in the presence of TMEDA at 35 degrees C provided a 4:1 ratio of trans:cis tert-butyl esters (18a:18b) via in situ ketene formation. Ester hydrolysis, followed by selective crystallization of undesired 2b as the HCl salt, led to isolation of 2a in 47% overall yield. Aminopyrazole intermediate 3 was synthesized via the condensation reaction of 2-fluorophenylhydrazine hydrochloride (4a) with acrylonitrile derivative 5 in 65-70% yield. Coupling of advanced intermediates 2a and 3b via activation with thionyl chloride gave a 92% yield of 1.     

Crystal structure of a methyl(methoxy)carbene complex of nickel(II), trans-[Ni(C6Cl5)(PMe2Ph)2{C(OMe)Me}]BF4

The structure of a nickel(II) complex, trans-[Ni(C₆Cl₅)(PMe₂Ph)₂{C(OMe)Me}]BF₄, containing the simplest alkyl(alkoxy)carbene ligand has been determined by X-ray crystallography (R = 0.091). The geometry around the nickel atom is square-planar. The comparatively short NiC(1) bond length of 1.843(10) Å showed the presence of π-bonding in the nickel-carbene bond.     

Effect of Electrode Pattern on the Column Structure and Yield Stress of Electrorheological Fluids

For electrorheological (ER) suspensions, the aggregate structures of particles were observed in electric fields by the use of transparent cells with different electrode patterns. Although the suspension is dispersed to noninteracting particles without electric fields, many aggregates are formed on the electrode surface in electric fields. Since the dipole–dipole interactions cause chain structures of particles and equilibrium conformations of chains are always aligned with electric field, the aggregates indicate the presence of columns spanning the electrode gap. The particle concentration in columns which are developed between parallel-plate electrodes is about 22 vol %. In striped electrodes, the particles construct striped aggregates along the electrodes and no particles remain in the insulating region. The particle concentration in striped aggregates is about 35 vol %. The nonuniformity of electric field is responsible for the high particle concentration. The increase in particle concentration of column lead to the high yield stress of electrified suspension. Therefore, the ER performance of suspension as an overall response can be improved by the electrode design.     

Blue copper model complexes with distorted tetragonal geometry acting as effective electron-transfer mediators in dye-sensitized solar cells

The electron self-exchange rate constants of blue copper model complexes, [(-)-sparteine-N,N'](maleonitriledithiolato-S,S')copper ([Cu(SP)(mmt)])(0/)(-), bis(2,9-dimethy-1,10-phenanthroline)copper ([Cu(dmp)(2)](2+/+)), and bis(1,10-phenanthroline)copper ([Cu(phen)(2)](2+/+)) have been determined from the rate constants of electron transfer from a homologous series of ferrocene derivatives to the copper(II) complexes in light of the Marcus theory of electron transfer. The resulting electron self-exchange rate constant increases in the order: [Cu(phen)(2)](2+/+) < [Cu(SP)(mmt)](0/)(-) < [Cu(dmp)(2)](2+/+), in agreement with the order of the smaller structural change between the copper(II) and copper(I) complexes due to the distorted tetragonal geometry. The dye-sensitized solar cells (DSSC) were constructed using the copper complexes as redox couples to compare the photoelectrochemical responses with those using the conventional I(3)(-)/I(-) couple. The light energy conversion efficiency (eta) values under illumination of simulated solar light irradiation (100 mW/cm(2)) of DSSCs using [Cu(phen)(2)](2+/+), [Cu(dmp)(2)](2+/+), and [Cu(SP)(mmt)](0/)(-) were recorded as 0.1%, 1.4%, and 1.3%, respectively. The maximum eta value (2.2%) was obtained for a DSSC using the [Cu(dmp)(2)](2+/+) redox couple under the light irradiation of 20 mW/cm(2) intensity, where a higher open-circuit voltage of the cell was attained as compared to that of the conventional I(3)(-)/I(-) couple.     

Semi-micro size-exclusion chromatography: Molecular-weight measurement of poly (ethylene terephthalate) and separation of oligomers and prepolymers

Summary Several polystyrene gels of different pore sizes were packed into a 500 mm×2.1 mm I.D. column. Semi-micro size-exclusion chromatography (SEC) using these columns was carried out with a system consisting of a triple piston pump, a micro loop injector and a flow cell with 1.0-μl cell volume constructed for semi-micro HPLC, because the dead volume of the injector and the cell volume of flow cell for conventional HPLC caused a significant loss in column efficiency. The effects of sample amount, injection volume and mobile phase flow rate on column efficiency and retention volume were examined and the optimized operational variables of the sample amount (below 500 μg), the injection volume (less than 15 μl) and the flow rate range (30–70 μl/min) determiend for semi-micro SEC. Oligostyrene, epoxy resin, phenol-formaldehyde resin and phthalates were analyzed by the optimized semi-micro SEC system under the given conditions. In addition, molecular weight distribution of four different poly(ethylene terephthalate) films was successfully measured by using a mixture of chloroform and hexafluoroisopropanol as the eluent.     

Secondary structural changes of chymotrypsinogen A,alpha-chymotrypsin,and the isolated polypeptides Cys1-Leu13, Ile16-Tyr146, and Ala149-Asn245 in sodium dodecyl sulfate,urea and guanidine hydrochloride

Secondary structural changes of chymotrypsinogen A,-chymotrypsin, and their isolated polypeptides Cys¹-Leu¹³, Ile¹⁶-Tyr¹⁴⁶, and Ala¹⁴⁹-Asn²⁴⁵were examined in aqueous solutions of sodium dodecyl sulfate (SDS), urea, and guanidine hydrochloride (residue numbers from chymotrypsinogen). After the fragmentation by the cleavage of disulfide bridges in-chymotrypsin, the helical structure was formed in the isolated polypeptide 16–146 where the helical segments do not exist in the protein state. The polypeptide 149–245, where the helical segments of the parent protein are originally located, contained no helices. The polypeptide 1–13 was almost disordered. The three polypeptides, chymotrypsinogen,-chymotrypsin and the polypeptide 16–146, clearly showed differences in the stabilities of helical structures in solutions of urea and guanidine hydrochloride. The addition of SDS accelerated the formation of helical structures in each polypeptide except for 1–13.