Relaxations of selenium in crystalline and amorphous states

Complex shear modulus at 33 kc./sec. is measured at temperatures of ?150–150°C. for amorphous selenium and crystalline selenium with different crystallinities. The dielectric relaxation at 10 kc./sec. to 3 kc./sec. to 3 Mc./sec. is observed at temperatures of ?32–25°C. for iodine-doped crystalline selenium. It is concluded from the results of this study and of others' that selenium exhibits four relaxations, α, β γ, and δ, in order of descending temperature. The β relaxation is observed only in the amorphous sample above the glass temperature and is assigned to the primary relaxation. The α, γ, and δ relaxations are found in the crystalline selenium. The α relaxation, which is prominent in a highly crystalline sample, is assigned to the crystalline relaxation. The γ and δ relaxations increase in peak height with decreasing crystallinity and are attributed to the disordered region in the crystalline selenium. The dispersion map (logarithm of frequency versus reciprocal absolute temperature of loss maximum) of selenium is presented.     

Ionic liquid crystal as a hole transport layer of dye-sensitized solar cells

Use of a new ionic liquid crystal, 1-dodecyl-3-methylimidazolium iodide, and iodine as an electrolyte of dye-sensitized solar cells leads to a high short circuit photocurrent density and a high light-to-electricity conversion efficiency, due to a self-assembled structure of the imidazolium cations, resulting in high conductivity of the electrolyte.     

Separation and simultaneous determination of cobalt, nickel and copper with 2-(4-methyl-2-quinolylazo)-5-diethylaminophenol by reversed-phase high-performance liquid chromatography

Performance of six quinolylazo compounds was studied as a pre-column derivatizing reagent for the separation of metal ions in the reversed-phase high-performance liquid chromatography. 2-(4-Methyl-2-quinolylazo)-5-diethylaminophenol (QADP) was suited for the determination of Co, Ni and Cu in the presence of a large amount of Fe. The detection limits under the optimized conditions [stationary phase: L-column ODS; mobile phase: acetone-water (62:38, v/v) containing 0.01 M NH(4)SCN and 0.01 M 2-morpholinoethanesulfonic acid-NaOH (pH 6); injection volume: 10 mul] were 0.24 ng for Co, 0.22 for Ni and 0.53 for Cu. This method was successfully applied to the determination of these metal ions in a standard steel sample.     

Determination of bisphenol A in human breast milk by HPLC with column-switching and fluorescence detection

A highly sensitive HPLC method was developed for the determination of xenoestrogenic compound, bisphenol A (BPA) in human breast milk samples. After a two-step liquid-liquid extraction, BPA was derivatized with fluorescent labeling reagent, 4-(4,5-diphenyl-1H-imidazol-2-yl)benzoyl chloride (DIB-Cl). The excess fluorescent reagent could be removed effectively using a column-switching system. The separation of DIB-BPA from endogenous materials in milk was carried out on two C(18) columns and fluorescence intensity was monitored at 475 nm with the excitation of 350 nm. A good linearity (r = 0.994) was observed of BPA in the concentration range of 0.2-5.0 ng mL(-1) in breast milk, and the detection limit was 0.11 ng mL(-1) at a signal-to-noise ratio of 3. Intra- and inter-day precision (RSD, %) were less than 8.7 and 10.4, respectively. Twenty-three breast milk samples of healthy lactating women were analyzed for the BPA concentration; the mean value was 0.61 +/- 0.20 ng mL(-1), with no correlation to the lipid content of milk samples.     

Preconcentration and determination of calcium and magnesium in brine with flow-injection systems

On-line preconcentration on a chelating resin (Dowex A-1) and elution with 0.1 M hydorchloric acid is followed by spectrophotometry based on the metal complexes formed with 1- (2-hydroxy-4-diethylamino-1-phenylazo)-2-hydroxynaphthalene-3,6-disulfonic acid. The total concentration of calcium and magnesium is determined; in a second sample, calcium is masked with a ligand buffer containing excess of barium(II) and EGTA, and magnesium is determined. The calcium concentration is measured by difference. Magnesium (1–30 μg l^?1 and calcium (8– 10 μg l^?1) in 2.5 M sodium chloride can be determined. Calcium and magnesium in analytical reagent-grade sodium chloride and potassium chloride and primary standard sodium chloride are aslo determined. The method based on the exchange between calcium ions and Mg(EDTA) is proposed to enchance the sensitivity for calcium.     

Molecular design of crown ethers. 21.(1,2) synthesis of novel double-armed benzo-15-crown-5 lariats and their complexation thermodynamics with light lanthanoid nitrates in acetonitrile

Three new disubstituted benzo-15-crown-5 derivatives (3-5) have been synthesized from 4',5'-bis(bromomethyl)benzo-15-crown-5 (2) and the corresponding alkanols in the presence of Na(2)S(2), and their complexation thermodynamics with light lanthanoid(III) nitrates (La-Gd) have been studied in anhydrous acetonitrile at 25 degrees C. Plots of K(S) against the reciprocal ionic diameter of lanthanoid exhibited monotonically declining pattern for the parent benzo-15-crown-5 (1) and 3 but showed a characteristic peak at Ce(3+) for 4 and 5. It is interesting to note that the simple extension of the alkyl side chains in 4 and 5 can alter the cation selectivity profiles of 1 and 3. Possessing two 2-oxapropyl groups, 3 gave a comparable K(S) for La(3+) but a significantly decreased K(S) for Ce(3+) compared with the corresponding values for 1, thus exhibiting an exceptionally high La(3+)/Ce(3+) selectivity of 11. Thermodynamically, the complexation of lanthanoid perchlorates with 1 is absolutely entropy-driven in acetonitrile, while the complexation of lanthanoid nitrates with 3-5 is primarily driven by exothermic enthalpy changes with accompanying moderate entropic gain or small entropic loss.     

Three New Lanostane Triterpenoids from Inonotus obliquus

Three new lanostane‐type triterpenoids, inonotsulides A, B, and C ( 1 – 3 , resp.) were isolated from the sclerotia of Inonotus obliquus (Pers .: Fr.) (Japanese name: Kabanoanatake; Russian name: Chaga). Their structures were determined to be (20R,24S)‐3β,25‐dihydroxylanost‐8‐en‐20,24‐olide ( 1 ), (20R,24R)‐3β,25‐dihydroxylanost‐8‐en‐20,24‐olide ( 2 ), and (20R,24S)‐3β,25‐dihydroxylanosta‐7,9(11)‐dien‐20,24‐olide ( 3 ) on the basis of chemical transformation, NMR spectroscopy including 1D and 2D (¹H,¹H‐COSY, NOESY, HMQC, HMBC), EI‐MS, and single‐crystal X‐ray analysis.     

Conformation of poly(S-(2-N-carbazolylethyl)-L-cysteine) in the solid state

The β-forming characteristics of poly(S-(2-N-carbazolylethyl)-L -cysteine), (CELC)_n, were examined by infrared (IR) spectroscopy. The film of (CELC)₃₉ cast from tetrahydrofuran (THF) showed the typical spectrum of the antiparallel β-form with the amide I band at 1630 cm^?1, whereas that of (CELC)₂₀₀ from dimethylformamide (DMF) or pyridine exhibited the amide I band at 1640 cm^?1 which shifted to 1630 cm^?1 on heating at 100°C for 5 min. As a result of the examination of the spectral variation due to the degree of polymerization, casting solvents, casting temperatures, and heat treatment, together with the evaluation of interaction constants for intermolecular hydrogen bonds, the band at 1640 cm^?1 was attributed to the antiparallel-chain pleated sheet (designated as β′-form) with weaker hydrogen bond strength than that of the usual antiparallel β-form. The β′-β-transformation is discussed in terms of the rigidity of the side-chain region.     

Effect of dose rate on the radiation-induced polymerization of ethylene in tert-butyl alcohol

The dependence of the dose rate on the rate of radiation-induced polymerization of ethylene in tert-butyl alcohol containing 5 vol-% water was studied. The reaction was carried out by use of a reactor with a capacity of 100 ml under the following conditions: pressure, 200 kg/cm²; temperature, 24 ± 3°C; dose rate, 3.7 × 10⁴?1.6 × 10⁵ rad/hr; amount of medium, 70 ml. The dose rate exponents for rate of the polymerization, the molecular weight, and the number of polymer chain were found to be about 0.8, ?0.1, and 0.9, respectively. These results were well explained with kinetic results (obtained by a novel analytical method) for the polymerization which contain both first-order and second-order terminations for the concentrations of propagating radical. The individual values of the rate constants in each elementary reaction were also obtained.